The famous Etching and Soldering Workshop

From syn2cat - HackerSpace.lu
Revision as of 21:13, 24 October 2011 by Kwisatz (Talk | contribs)

Jump to: navigation, search
Note: this article is about a passed event.
Add your Event
Workshop.png
The famous Etching and Soldering Workshop
Design your own PCBs
Radio.jpg
Type of Event: Workshop
From: 2011/08/06 01:00:00 PM
Till: 2011/08/06 06:00:00 PM
Recurring: bi-monthly
Organizer: syn2cat
Cost: See the 'What does it cost' section"See the 'What does it cost' section" is not a number.
Mandatory registration:
Website: http://www.facebook.com/#...
Attendees: prometheus, Paul, Yannick, Qu4x
Log-in to RSVP
Contact Person(s): Slopjong (mail)
Keywords:
Location
Where: Hackerspace, Strassen (11, rue du Cimetière, L-8018 Strassen, Luxembourg)
Map:
Loading map...
Tools
QrCode: QR-8cf983878a2814ee351abd229bd40cc6.png
Add to your calendar: Download … further results
Alternate picture: None
Announce globally: yes
Learn how to design your own PCB and how to etch and solder it afterwards.



Letzebuergesch Versioun: [1]

Contents

News

  • August 29th - The workshop at the LHC2 in the shackspace on the past weekend was pure fun. If you wish to have this workshop series in your space, drop us a message to electronics<at>hackerspace.lu
  • July 10th - D'Letzebuergesch Versioun fannt Dier hei: [2]
  • July 7th - The next session will be on August 6th.

Some information

What is the workshop about?

The goal of the workshop is to teach you how you design your own circuit board using the Eagle layout software.

What will be done?

You can choose to do the voice changer, the fm transmitter (for doing some radio) or just do both. They fit together. Imagine how radio listeners react if there's suddenly a robot voice on their radio :-)

Who can attend?

Everyone. And I mean everyone, even non-members are welcome. Please send me a message to

electronics*at*hackerspace.lu

Replace *at* with the @ sign.

What does it cost

The workshop itself is free but you have to pay the material cost.

  • Voice changer: 15€ (1.)
  • FM transmitter: 7€ (1.)

(1.) There's a small donation included.

How many can attend?

Ten. The workshop will be repeated on a bi-monthly basis.

How do I become a fan of the workshop?

Just visit the facebook fanpage.

Schedule

In the workshop only the FM transmitter will be designed because the voice changer takes too much time for that. If you want to etch and solder the voice changer you get a preprinted layout which is proved to work.

  • 13:00 Presentation about Eagle (the CAD software) and PCBs
  • 13:45 Designing PCB: Schematic (from the scratch)
  • 14:30 Designing PCB: Board (from the scratch)
  • 15:15 Exposing
  • 16:15 Etching
  • 17:00 Soldering (FM transmitter takes up to 1h, voice changer takes up to 3h)
  • 18:00 Enjoyig the rest of the evening with some Club Mate and smalltalk.
Personal tools
Namespaces

Variants
Actions
Navigation
syn2cat
Hackerspace
Activities
Initiatives
Community
Tools
Tools