DT 800

From syn2cat - HackerSpace.lu
(Difference between revisions)
Jump to: navigation, search
(DT 800 RFID Reader)
Line 4: Line 4:
  
 
Here is some information about the switch settings and other stuff
 
Here is some information about the switch settings and other stuff
 +
 +
== Device Properties ==
 +
 +
IP: 192.168.178.13
 +
Subnet: 24 (255.255.255.0)
 +
MAC: 00-30-FB-10-36-2B
 +
Password for access via telnet 00000 (can be changed when you access it trough the display on the device
  
 
== Swich settings ==
 
== Swich settings ==

Revision as of 17:34, 21 January 2011

Contents

DT 800 RFID Reader

We got a RFID reader from primion

Here is some information about the switch settings and other stuff

Device Properties

IP: 192.168.178.13 Subnet: 24 (255.255.255.0) MAC: 00-30-FB-10-36-2B Password for access via telnet 00000 (can be changed when you access it trough the display on the device

Swich settings

Here are the settings of the switch inside the divice in binary 0= down 1= up

In Normal state:

10110000

In the state were settings apear on the display(in case you mess something up with the ip or RS232 settings)

00000001

Accessing via telnet

To access the device using telnet you have to set your computers ip to something in the range of 192.168.178/24 The devices IP is 192.168.178.13

You will be asked a password. It is 00000

Now you will get almost same settings as on the display

Personal tools
Namespaces

Variants
Actions
Navigation
syn2cat
Hackerspace
Activities
Initiatives
Community
Tools
Tools