https://wiki.syn2cat.lu/w/api.php?action=feedcontributions&user=Slopjong&feedformat=atomsyn2cat - HackerSpace.lu - User contributions [en]2024-03-28T11:19:58ZUser contributionsMediaWiki 1.19.24//wiki.syn2cat.lu/wiki/DevOps_MeetupDevOps Meetup2017-04-05T12:55:01Z<p>Slopjong: Created page with "{{Event |attendees= |eventtype=Meeting |subtitle=Devopsians coming together |description= |contact=Slopjong, |organizer=syn2cat |recurring=no |from=2017/04/26 19:00 |till=201..."</p>
<hr />
<div>{{Event<br />
|attendees=<br />
|eventtype=Meeting<br />
|subtitle=Devopsians coming together<br />
|description=<br />
|contact=Slopjong, <br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2017/04/26 19:00<br />
|till=2017/04/26 21:00<br />
|location=Level2<br />
|logo=<br />
|alternate_picture=<br />
|announce=no<br />
|cost=0 EUR<br />
|reg=<br />
|ticket_url=<br />
|url=<br />
|u19=no<br />
|extrainfo=<br />
|keywords=<br />
}}</div>Slopjong//wiki.syn2cat.lu/wiki/General_Assembly_March_2017General Assembly March 20172017-03-06T16:56:25Z<p>Slopjong: Edited automatically from page General Assembly March 2017.</p>
<hr />
<div>{{Event<br />
|attendees=Sid, Gunstick, Thierry, Slopjong<br />
|eventtype=Event<br />
|subtitle=General Assembly March 2016<br />
|description=Here we go again for an new regular General Assembly (GA).<br />
|contact=Gunstick,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2017/03/18 19:00<br />
|till=2017/03/18 22:00<br />
|location=Level2<br />
|logo=<br />
|alternate_picture=<br />
|announce=no<br />
|cost=0 EUR<br />
|reg=<br />
|ticket_url=<br />
|url=<br />
|u19=no<br />
|extrainfo=<br />
|keywords=<br />
}}<br />
==Introduction==<br />
* The date was proposed on bootstrap meeting of [[Bootstrap_2017-01|2017-01-21]].<br />
<br />
==Preparations==<br />
Some items need to be done before the assembly<br />
<br />
* prepare voting sheets and result sheets<br />
* candidates have to do their candidature before start of GA<br />
* reserve a room<br />
<br />
==Agenda==<br />
<br />
this can be modified until 1st March 2017<br />
* decide on voting board<br />
* activity report 2016<br />
* Presentation of 2016's receipts and expenditures<br />
* Discharge of the treasurer by our auditors<br />
* discharge of office<br />
* Haxogreen sponsoring<br />
* Presentation of new activities 2017<br />
* Election of a new administrative council<br />
* Election of a new treasurer<br />
* Election of president and vice president<br />
* Call for two financial auditors for 2018<br />
<br />
=== Candidates ===<br />
To be candidate, you have to send an email to office@hackerspace.lu indicating if you want to be President, Vice-President, Treasurer or office member.<br />
<br />
{| class="wikitable" border="1"<br />
|-<br />
! who !! post !! email date <br />
|-<br />
<br />
| Gunstick || President || 27.02.2017<br />
|-<br />
| || Vice President || 00.00.2017<br />
|-<br />
| || Treasurer || 00.00.2017<br />
|-<br />
| || office member || 00.00.2017<br />
|-<br />
|}<br />
<br />
=== Vote delegations ===<br />
Remember: do not announce delegations to people already listed below: they either are not coming or already have a delegation. First ask personally the delegate if s/he accepts.<br/><br />
Your proxy '''must''' bring a valid proof of delegation to the GA or you have to send a PGP signed email to office@hackerspace.lu<br />
{| class="wikitable" border="1"<br />
|-<br />
! member's pseudo !! vote delegated to !! verified via<br />
|-<br />
| || || <br />
|-<br />
| || || <br />
|-<br />
| || || <br />
|-<br />
| || || <br />
|}<br />
<br />
== Minutes ==</div>Slopjong//wiki.syn2cat.lu/wiki/Bootstrap_2015-12Bootstrap 2015-122015-11-28T16:59:48Z<p>Slopjong: /* Topics */</p>
<hr />
<div>{{Event<br />
|attendees=, Hibouu<br />
|eventtype=Meeting<br />
|subtitle=The syn<sub>2</sub>cat plenum<br />
|description=Decide where syn<sub>2</sub>cat is heading next. Every 4 weeks on Saturday, starting at 7pm until midnight.<br />
|contact=Gunstick, Muling, Sid, Steve, defane, rafiot<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2015/11/28 19:00<br />
|till=2015/11/28 23:30<br />
|location=Level2<br />
|logo=Bootstraps.gif<br />
|alternate_picture=<br />
|announce=no<br />
|cost=0 EUR<br />
|reg=<br />
|ticket_url=<br />
|url=<br />
|u19=no<br />
|extrainfo=<br />
|keywords=<br />
}}<br />
__NOTOC__<br />
<br />
= Introduction =<br />
<br />
If you would like to discuss something, simply add it below the upcoming event!<br />
<br />
The [[Guidelines]] page regroups all major decisions taken at prior Bootstrap Meetings.<br />
<br />
; Etiquette<br />
* '''No items can be added to a schedule once the meeting has begun.'''<br />
* '''If midnight before meeting, the topics is empty, there will be no meeting. Sorry'''<br />
* '''A meeting can't last any longer than 4 hours (a 30min pause will be made after 2h)'''<br />
* '''People should sign the topics they added using <nowiki>~~~~</nowiki>.'''<br />
* '''Topics will only be discussed if their authors are present at the meeting.'''<br />
<br />
= Topics =<br />
<!-- add below here --><br />
<br />
- Project [https://vpcabinet.wordpress.com/ VPC] [http://virtuapin.net/ Virtua Pin] [http://www.vpforums.org/ Visual Pinball] #Funding<br />
<br />
- Assembly at the 32C3 (alone or white Trier's guys (see mailing list) ) #Fun<br />
<br />
- ALUGL #Knowl.<br />
<br />
= Minutes =<br />
<!-- to fill out after meeting --></div>Slopjong//wiki.syn2cat.lu/wiki/Bootstrap_2015-12Bootstrap 2015-122015-11-28T16:58:46Z<p>Slopjong: /* Topics */</p>
<hr />
<div>{{Event<br />
|attendees=, Hibouu<br />
|eventtype=Meeting<br />
|subtitle=The syn<sub>2</sub>cat plenum<br />
|description=Decide where syn<sub>2</sub>cat is heading next. Every 4 weeks on Saturday, starting at 7pm until midnight.<br />
|contact=Gunstick, Muling, Sid, Steve, defane, rafiot<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2015/11/28 19:00<br />
|till=2015/11/28 23:30<br />
|location=Level2<br />
|logo=Bootstraps.gif<br />
|alternate_picture=<br />
|announce=no<br />
|cost=0 EUR<br />
|reg=<br />
|ticket_url=<br />
|url=<br />
|u19=no<br />
|extrainfo=<br />
|keywords=<br />
}}<br />
__NOTOC__<br />
<br />
= Introduction =<br />
<br />
If you would like to discuss something, simply add it below the upcoming event!<br />
<br />
The [[Guidelines]] page regroups all major decisions taken at prior Bootstrap Meetings.<br />
<br />
; Etiquette<br />
* '''No items can be added to a schedule once the meeting has begun.'''<br />
* '''If midnight before meeting, the topics is empty, there will be no meeting. Sorry'''<br />
* '''A meeting can't last any longer than 4 hours (a 30min pause will be made after 2h)'''<br />
* '''People should sign the topics they added using <nowiki>~~~~</nowiki>.'''<br />
* '''Topics will only be discussed if their authors are present at the meeting.'''<br />
<br />
= Topics =<br />
<!-- add below here --><br />
<br />
- Project [https://vpcabinet.wordpress.com/ VPC] [http://virtuapin.net/ Virtua Pin] [http://www.vpforums.org/ Visual Pinball] #Funding<br />
<br />
- Assembly at the 32C3 (alone or white Trier's guys (see mailing list) ) #Fun<br />
<br />
- ALUGL<br />
<br />
= Minutes =<br />
<!-- to fill out after meeting --></div>Slopjong//wiki.syn2cat.lu/wiki/File:QR-8f95fc0145d56f5c390f2999a6337621.pngFile:QR-8f95fc0145d56f5c390f2999a6337621.png2015-04-24T20:34:47Z<p>Slopjong: Qrcode generator uploaded a new version of &quot;File:QR-8f95fc0145d56f5c390f2999a6337621.png&quot;: Encoded URL for JS Luxembourg: ITCSS and ES6</p>
<hr />
<div>QrCode QR-8f95fc0145d56f5c390f2999a6337621.png, generated on Fri, 24 Apr 2015 22:34:45 +0200 by the QrCode Extension for page [[JS Luxembourg: ITCSS and ES6]].</div>Slopjong//wiki.syn2cat.lu/wiki/JS_Luxembourg:_ITCSS_and_ES6JS Luxembourg: ITCSS and ES62015-04-24T20:34:43Z<p>Slopjong: Created page with "{{Event |attendees= |eventtype=Event |subtitle=Monthly Meetup: ITCSS and ES6 |description=Two talks are scheduled and there is still one slot for a lightning talk (10min) avai..."</p>
<hr />
<div>{{Event<br />
|attendees=<br />
|eventtype=Event<br />
|subtitle=Monthly Meetup: ITCSS and ES6<br />
|description=Two talks are scheduled and there is still one slot for a lightning talk (10min) available (really don't hesitate - we are sure everyone has incredible stuffs to share).<br />
<br />
<br />
ITCSS by @littleiffel<br />
<br />
A sane, scalable, managed CSS architecture from CSS Wizardry<br />
<br />
ES6 by @kramp<br />
<br />
The future of JavaScript is today. We will explore together the new version of our favorite programming language. <br />
|contact=Slopjong, <br />
|organizer=Syn2cat, <br />
|recurring=no<br />
|from=2015/05/04 19:00<br />
|till=2015/05/04 20:00<br />
|location=Level2<br />
|logo=<br />
|alternate_picture=<br />
|announce=no<br />
|cost=0 EUR<br />
|reg=<br />
|ticket_url=<br />
|url=<br />
|u19=no<br />
|extrainfo=<br />
|keywords=<br />
}}</div>Slopjong//wiki.syn2cat.lu/wiki/File:Global_433352594.jpegFile:Global 433352594.jpeg2015-04-24T20:32:24Z<p>Slopjong: </p>
<hr />
<div></div>Slopjong//wiki.syn2cat.lu/wiki/Bootstrap_2014-10Bootstrap 2014-102014-10-17T06:59:58Z<p>Slopjong: /* Topics */</p>
<hr />
<div>{{Event<br />
|attendees=Cataspanglish, Slopjong<br />
|eventtype=Meeting<br />
|subtitle=The syn<sub>2</sub>cat plenum<br />
|description=Decide where syn<sub>2</sub>cat is heading next. Every third Saturday of a month, starting at 7pm until midnight.<br />
|contact=Gunstick, Muling, sid, stereo<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2014/10/18 19:00<br />
|till=2014/10/18 23:30<br />
|location=Level2<br />
|logo=Bootstraps.gif<br />
|alternate_picture=<br />
|announce=no<br />
|cost=0 EUR<br />
|reg=<br />
|ticket_url=<br />
|url=<br />
|u19=no<br />
|extrainfo=<br />
|keywords=<br />
}}<br />
__NOTOC__<br />
<br />
= Introduction =<br />
<br />
If you would like to discuss something, simply add it below the upcoming event!<br />
<br />
The [[Guidelines]] page regroups all major decisions taken at prior Bootstrap Meetings.<br />
<br />
; Etiquette<br />
* '''No items can be added to a schedule once the meeting has begun.'''<br />
* '''If midnight before meeting, the topics is empty, there will be no meeting. Sorry'''<br />
* '''A meeting can't last any longer than 4 hours (a 30min pause will be made after 2h)'''<br />
* '''People should sign the topics they added using <nowiki>~~~~</nowiki>.'''<br />
* '''Topics will only be discussed if their authors are present at the meeting.'''<br />
<br />
= Topics =<br />
<!-- add below here --><br />
* Digital Privacy Salon [[User:Cataspanglish|Cataspanglish]]<br />
* Rules for building door (c.f. email sent to members list)<br />
* Hack.lu preparation and participation<br />
* workshop talk series mml slam [[User:Slopjong|Slopjong]]<br />
<br />
= Minutes =<br />
<!-- to fill out after meeting --></div>Slopjong//wiki.syn2cat.lu/wiki/Bootstrap_2014-10Bootstrap 2014-102014-10-17T06:58:11Z<p>Slopjong: Edited automatically from page Bootstrap 2014-10.</p>
<hr />
<div>{{Event<br />
|attendees=Cataspanglish, Slopjong<br />
|eventtype=Meeting<br />
|subtitle=The syn<sub>2</sub>cat plenum<br />
|description=Decide where syn<sub>2</sub>cat is heading next. Every third Saturday of a month, starting at 7pm until midnight.<br />
|contact=Gunstick, Muling, sid, stereo<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2014/10/18 19:00<br />
|till=2014/10/18 23:30<br />
|location=Level2<br />
|logo=Bootstraps.gif<br />
|alternate_picture=<br />
|announce=no<br />
|cost=0 EUR<br />
|reg=<br />
|ticket_url=<br />
|url=<br />
|u19=no<br />
|extrainfo=<br />
|keywords=<br />
}}<br />
__NOTOC__<br />
<br />
= Introduction =<br />
<br />
If you would like to discuss something, simply add it below the upcoming event!<br />
<br />
The [[Guidelines]] page regroups all major decisions taken at prior Bootstrap Meetings.<br />
<br />
; Etiquette<br />
* '''No items can be added to a schedule once the meeting has begun.'''<br />
* '''If midnight before meeting, the topics is empty, there will be no meeting. Sorry'''<br />
* '''A meeting can't last any longer than 4 hours (a 30min pause will be made after 2h)'''<br />
* '''People should sign the topics they added using <nowiki>~~~~</nowiki>.'''<br />
* '''Topics will only be discussed if their authors are present at the meeting.'''<br />
<br />
= Topics =<br />
<!-- add below here --><br />
* Digital Privacy Salon [[User:Cataspanglish|Cataspanglish]]<br />
* Rules for building door (c.f. email sent to members list)<br />
* Hack.lu preparation and participation<br />
<br />
= Minutes =<br />
<!-- to fill out after meeting --></div>Slopjong//wiki.syn2cat.lu/wiki/The_famous_Etching_and_Soldering_WorkshopThe famous Etching and Soldering Workshop2012-12-12T23:45:08Z<p>Slopjong: /* News */</p>
<hr />
<div>{{Event<br />
|attendees=prometheus, Paul, Yannick, Qu4x<br />
|eventtype=Workshop<br />
|subtitle=Design your own PCBs<br />
|description=Learn how to design your own PCB and how to etch and solder it afterwards.<br />
|contact=Slopjong<br />
|organizer=syn2cat<br />
|from=2011/08/06 01:00:00 PM<br />
|till=2011/08/06 06:00:00 PM<br />
|recurring=bi-monthly<br />
|location=Hackerspace, Strassen<br />
|logo=Radio.jpg<br />
|announce=yes<br />
|cost=See the 'What does it cost' section<br />
|url=http://www.facebook.com/#!/pages/The-Famous-Etching-And-Soldering-Workshop/132657713476774<br />
|u19=no<br />
|external=no<br />
}}<br />
'''Letzebuergesch Versioun: [http://www.hackerspace.lu/wiki/Den_%C3%84tz-_a_L%C3%A9it-Workshop]'''<br />
<br />
= News =<br />
* December 13th - The next workshop will be on December 28th. Please visit '''[http://wiki.hackerspace.lu/wiki/The_Famous_Etching_and_Soldering_Workshop_2012]'''<br />
* August 29th - The workshop at the LHC2 in the shackspace on the past weekend was pure fun. If you wish to have this workshop series in your space, drop us a message to electronics<at>hackerspace.lu<br />
* July 10th - '''D'Letzebuergesch Versioun fannt Dier hei: [http://www.hackerspace.lu/wiki/Den_%C3%84tz-_a_L%C3%A9it-Workshop]'''<br />
* July 7th - The next session will be on August 6th.<br />
<!--<br />
* May 22th - The workshop yesterday was a great success. The attendees went home happily with their transmitters :-) Attendees were prometheus, Inouk, Destructive, Rémi, Guillaume, Jcb<br />
* Apr 20th - The next session will be on May 21st. Both circuits are offered - the voice changer & the FM transmitter.<br />
* Feb 20th - Only the voice changer is offered (at least) in next two workshops. The date of the next workshop (April 1st) is not fix. Check this site later again.<br />
* Feb 15th - Only the voice changer is offered in the workshop on Saturday, Feb 19th. In the next workshops you can also do the transmitter.<br />
* Feb 4th - The workshop will be delayed. More details coming soon ...<br />
--><br />
<br />
= Some information =<br />
<br />
== What is the workshop about? ==<br />
<br />
The goal of the workshop is to teach you how you design your own circuit board using the [http://cadsoft.de Eagle] layout software.<br />
<br />
== What will be done? ==<br />
You can choose to do the voice changer, the fm transmitter (for doing some radio) or just do both. They fit together. Imagine how radio listeners react if there's suddenly a robot voice on their radio :-)<br />
<br />
== Who can attend? ==<br />
Everyone. And I mean everyone, even non-members are welcome. Please send me a message to <br />
<br />
electronics*at*hackerspace.lu<br />
<br />
Replace *at* with the @ sign.<br />
<br />
== What does it cost ==<br />
<br />
The workshop itself is free but you have to pay the material cost. <br />
<br />
* Voice changer: 15€ (1.)<br />
* FM transmitter: 7€ (1.)<br />
<br />
(1.) There's a small donation included.<br />
<br />
== How many can attend? ==<br />
<br />
Ten. The workshop will be repeated on a bi-monthly basis.<br />
<br />
== How do I become a fan of the workshop? ==<br />
<br />
Just visit the [http://www.facebook.com/#!/pages/The-Famous-Etching-And-Soldering-Workshop/132657713476774| facebook fanpage].<br />
<br />
= Schedule =<br />
<br />
In the workshop only the FM transmitter will be designed because the voice changer takes too much time for that. If you want to etch and solder the voice changer you get a preprinted layout which is proved to work. <br />
<br />
* 13:00 Presentation about Eagle (the CAD software) and PCBs<br />
* 13:45 Designing PCB: Schematic (from the scratch)<br />
* 14:30 Designing PCB: Board (from the scratch)<br />
* 15:15 Exposing<br />
* 16:15 Etching<br />
* 17:00 Soldering (FM transmitter takes up to 1h, voice changer takes up to 3h)<br />
* 18:00 Enjoyig the rest of the evening with some Club Mate and smalltalk.</div>Slopjong//wiki.syn2cat.lu/wiki/SSH_-_Secure_ShellSSH - Secure Shell2012-12-04T11:08:55Z<p>Slopjong: Edited automatically from page SSH - Secure Shell.</p>
<hr />
<div>{{Event<br />
|attendees=Thierry, Slopjong<br />
|eventtype=Workshop<br />
|subtitle=SSH, the sysadmin's swiss army knife<br />
|description=A Talk / Workshop about how to use SSH in a proper way. And in other ways.<br />
|contact=Thierry, Gunstick,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2013/01/19 17:00<br />
|till=2013/01/19 18:00<br />
|location=Hackerspace, Strassen<br />
|announce=no<br />
|cost=0 EUR<br />
|reg=No<br />
|u19=no<br />
|keywords=ssh, secure, shell, terminal, talk, workshop, syn2cat, strassen, gunstick, server<br />
}}<br />
1) the tiny crypto session<br />
* public key stuff but private<br />
* how to no password or once password<br />
* restrict access and foot shooting<br />
2) advanced stuff<br />
* ssh instead of scp or sftp<br />
* pipe to pipe to pipe<br />
* mass broadcast trickery<br />
3) driving security staff nuts<br />
* tunnels through mountains<br />
* routing around lakes<br />
* gateways to hell</div>Slopjong//wiki.syn2cat.lu/wiki/The_Famous_Etching_and_Soldering_Workshop_2012The Famous Etching and Soldering Workshop 20122012-11-28T22:08:09Z<p>Slopjong: </p>
<hr />
<div>{{Event<br />
|eventtype=Workshop<br />
|subtitle=Switch off any TV. Welcome Saturn!<br />
|description=Learn the process of designing a circuit board (PCB).<br />
<br />
Get an introduction into PCBs and the different layers they are made of. After some little theory the second part will be the most interesting one. See the blank PCB being exposed and etched. Observer how the copper is removed by the acid and finally solder your own circuit board. <br />
<br />
After the workshop you will have built your own remote control to switch off any TV.<br />
<br />
Please register before mid-December. The kits must be pre-ordered.<br />
|contact=Slopjong<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2012/12/28 18:00<br />
|till=2012/12/28 20:00<br />
|location=Hackerspace, Strassen<br />
|logo=Tvbgone.jpg<br />
|announce=yes<br />
|cost=15 EUR<br />
|reg=Yes<br />
|ticket_url=http://slopjong.de/events<br />
|url=http://slopjong.de<br />
|u19=no<br />
}}<br />
Click "Buy a ticket" to register.</div>Slopjong//wiki.syn2cat.lu/wiki/The_Famous_Etching_and_Soldering_Workshop_2012The Famous Etching and Soldering Workshop 20122012-11-27T23:43:58Z<p>Slopjong: </p>
<hr />
<div>{{Event<br />
|eventtype=Workshop<br />
|subtitle=Switch off any TV. Welcome Saturn!<br />
|description=Learn the process of designing a circuit board (PCB).<br />
<br />
Get an introduction into PCBs and the different layers they are made of. After some little theory the second part will be the most interesting one. See the blank PCB being exposed and etched. Observer how the copper is removed by the acid and finally solder your own circuit board. <br />
<br />
After the workshop you will have built your own remote control to switch off any TV.<br />
<br />
Please register before mid-December. The kits must be pre-ordered.<br />
|contact=Slopjong<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2012/12/28 18:00<br />
|till=2012/11/28 20:00<br />
|location=Hackerspace, Strassen<br />
|logo=Tvbgone.jpg<br />
|announce=yes<br />
|cost=15 EUR<br />
|reg=Yes<br />
|ticket_url=http://slopjong.de/events<br />
|url=http://slopjong.de<br />
|u19=no<br />
}}<br />
Click "Buy a ticket" to register.</div>Slopjong//wiki.syn2cat.lu/wiki/The_Famous_Etching_and_Soldering_Workshop_2012The Famous Etching and Soldering Workshop 20122012-11-27T23:36:13Z<p>Slopjong: </p>
<hr />
<div>{{Event<br />
|eventtype=Workshop<br />
|subtitle=Switch off any TV. Welcome Saturn!<br />
|description=Learn the process of designing a circuit board (PCB).<br />
<br />
Get an introduction into PCBs and the different layers they are made of. After some little theory the second part will be the most interesting one. See the blank PCB being exposed and etched. Observer how the copper is removed by the acid and finally solder your own circuit board.<br />
<br />
After the workshop you will have built your own remote control to switch off any TV.<br />
<br />
Please register before mid-December. The kits must be pre-ordered.<br />
|contact=Slopjong<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2012/12/28 18:00<br />
|till=2012/11/28 20:00<br />
|location=Hackerspace, Strassen<br />
|logo=Tvbgone.jpg<br />
|announce=yes<br />
|cost=15 EUR<br />
|reg=Yes<br />
|ticket_url=http://slopjong.de/events<br />
|url=http://slopjong.de<br />
|u19=no<br />
}}</div>Slopjong//wiki.syn2cat.lu/wiki/The_Famous_Etching_and_Soldering_Workshop_2012The Famous Etching and Soldering Workshop 20122012-11-27T23:35:49Z<p>Slopjong: </p>
<hr />
<div>{{Event<br />
|eventtype=Workshop<br />
|subtitle=Switch off any TV. Welcome Saturn!<br />
|description=Learn the process of designing a circuit board (PCB).<br />
<br />
Get an introduction into PCBs and the different layers they are made of. After some little theory the second part will be the most interesting one. See the blank PCB being exposed and etched. Observer how the copper is removed by the acid and finally solder your own circuit board.<br />
<br />
After the workshop you will have built your own remote control to switch off any TV.<br />
<br />
Please register before mid-December. The kits must be pre-ordered.<br />
|contact=Slopjong<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2012/12/28 18:00<br />
|till=2012/11/28 20:00<br />
|location=Hackerspace, Strassen<br />
|logo=Tvbgone<br />
|alternate_picture=Tvbgone<br />
|announce=yes<br />
|cost=15 EUR<br />
|reg=Yes<br />
|ticket_url=http://slopjong.de/events<br />
|url=http://slopjong.de<br />
|u19=no<br />
}}</div>Slopjong//wiki.syn2cat.lu/wiki/The_Famous_Etching_and_Soldering_Workshop_2012The Famous Etching and Soldering Workshop 20122012-11-27T23:35:18Z<p>Slopjong: </p>
<hr />
<div>{{Event<br />
|eventtype=Workshop<br />
|subtitle=Switch off any TV. Welcome Saturn!<br />
|description=Learn the process of designing a circuit board (PCB).<br />
<br />
Get an introduction into PCBs and the different layers they are made of. After some little theory the second part will be the most interesting one. See the blank PCB being exposed and etched. Observer how the copper is removed by the acid and finally solder your own circuit board.<br />
<br />
After the workshop you will have built your own remote control to switch off any TV.<br />
<br />
Please register before mid-December. The kits must be pre-ordered.<br />
|contact=Slopjong<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2012/12/28 18:00<br />
|till=2012/11/28 20:00<br />
|location=Hackerspace, Strassen<br />
|logo=Tvbgone<br />
|announce=yes<br />
|cost=15 EUR<br />
|reg=Yes<br />
|ticket_url=http://slopjong.de/events<br />
|url=http://slopjong.de<br />
|u19=no<br />
}}</div>Slopjong//wiki.syn2cat.lu/wiki/File:Tvbgone.jpgFile:Tvbgone.jpg2012-11-27T23:33:41Z<p>Slopjong: </p>
<hr />
<div></div>Slopjong//wiki.syn2cat.lu/wiki/The_Famous_Etching_and_Soldering_Workshop_2012The Famous Etching and Soldering Workshop 20122012-11-27T23:32:37Z<p>Slopjong: Created page with "{{Event |eventtype=Workshop |subtitle=Switch off any TV. Welcome Saturn! |description=Learn the process of designing a circuit board (PCB). Get an introduction into PCBs and ..."</p>
<hr />
<div>{{Event<br />
|eventtype=Workshop<br />
|subtitle=Switch off any TV. Welcome Saturn!<br />
|description=Learn the process of designing a circuit board (PCB).<br />
<br />
Get an introduction into PCBs and the different layers they are made of. After some little theory the second part will be the most interesting one. See the blank PCB being exposed and etched. Observer how the copper is removed by the acid and finally solder your own circuit board.<br />
<br />
After the workshop you will have built your own remote control to switch off any TV.<br />
<br />
Please register before mid-December. The kits must be pre-ordered.<br />
|contact=Slopjong<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2012/12/28 18:00<br />
|till=2012/11/28 20:00<br />
|location=Hackerspace, Strassen<br />
|logo=http://www.adafruit.com/images/medium/tvbgonekit_MED.jpg<br />
|announce=yes<br />
|cost=15 EUR<br />
|reg=Yes<br />
|ticket_url=http://slopjong.de/events<br />
|url=http://slopjong.de<br />
|u19=no<br />
}}</div>Slopjong//wiki.syn2cat.lu/wiki/General_Assembly_%22Extraordinary%22_August_2012General Assembly "Extraordinary" August 20122012-08-12T17:19:39Z<p>Slopjong: /* Misc */</p>
<hr />
<div>{{Event<br />
|attendees=Kwisatz, Thierry, Nick17, Sid, Gunstick, Perforin<br />
|eventtype=Meeting<br />
|subtitle=Extraordinary General Assembly<br />
|description=This is an extraordinary General Assembly to vote on some suggested statute modifications and re-elect part of the administrators.<br />
|contact=Kwisatz,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2012/08/25 19:00<br />
|till=2012/08/25 22:00<br />
|location=Hackerspace, Strassen<br />
|announce=no<br />
|cost=0 EUR<br />
|reg=No<br />
|u19=no<br />
}}<br />
__NOTOC__<br />
<br />
== Order of the day ==<br />
# Presentation and vote on statute changes<br />
# Discharge of current council<br />
# Election of a new treasurer<br />
# Election of two new secretaries<br />
# Selection of two treasury revisers<br />
<br />
Candidatures should be sent to mailto:office@hackerspace.lu<br />
<br />
== Misc ==<br />
* [http://www.doodle.com/getprymdad9558fi Doodle poll]<br />
<br />
* Vote delegations<br />
Remember: do not announce delegations to people already listed below: they either are not coming or already have a delegation. First ask personally the delegate if he/she accepts.<br />
{| class="wikitable" border="1"<br />
|-<br />
! member's pseudo !! vote delegated to<br />
|-<br />
| slopjong || Gunstick<br />
|-<br />
| Sim0n || Nick17<br />
|-<br />
| bartek || kwisatz<br />
|}<br />
<br />
Thus members (virtually) present: '''9'''<br/><br />
Members required: 25<br />
<br />
== Suggested changes to the statutes ==<br />
See [[Media:Syn2cat-statuts_280210.pdf|this file]] for the latest version of the statutes that have legal standing. You may suggest modifications up to 24 hours before the start of the general assembly.<br />
<br />
<br />
=== Suggested amendments by kwisatz ===<br />
=====Art. 1 old: =====<br />
[...] <s> qui a son siège au 189, av. de la faïencerie, L-1511 Luxembourg</s><br />
=====Art. 1 new:=====<br />
[...]<br />
(change siege)<br />
Add: <b>Le siège pourra être transféré à n'importe quel autre lieu du Grand Duché sur simple<br />
décision du Conseil d'Administration.</b><br />
<br />
----<br />
<br />
=====Art. 2 old:=====<br />
L'association a pour but, dans les domaines artistiques, culturelles et de nouvelles technologies:<br />
* d'encourager, de soutenir et de s'investir dans des projets d'éducation et/ou de <s>"R&D" (recherche et développement);</s><br />
* de rassembler des associations et individus intéressés des projets des susdits domaines,<br />
* d'organiser des manifestations culturelles, artistiques ou autres afin de poursuivre les objectifs susdits.<br />
<br />
Pour réaliser les objectifs susdits, l'association:<br />
* fait la gestion ainsi que l'exploitation d'un local surnommé "Hackerspace",<br />
* mets à dispostion aux diverses associations et individus intéressés une infrastructure élaborée<br />
(locaux, matériel informatique, électronique, artisanal...)<br />
<br />
=====Art. 2 new:=====<br />
L'association a pour objet, dans les domaines artistiques, culturelles et des nouvelles technologies:<br />
* d'encourager, de soutenir et de s'investir dans des projets d'éducation et de la recherche et du développement;<br />
* de rassembler des associations et individus intéressés des projets des susdits domaines,<br />
* de gérer et d'exploiter un ou plusieurs locaux aménagés de facon à remplir ces mêmes objectifs,<br />
* de mettre à disposition d'autres associations et individus son infrastructure (locaux, matériel informatique, électronique, artisanal...)<br />
* d'organiser des manifestations culturelles, artistiques ou autres afin de poursuivre ses objectifs.<br />
<br />
----<br />
<br />
=====Art. 3 old:=====<br />
<s>L'association est politiquement indépendante.</s><br />
Elle offre son expertise et sa fonction consultative à tout organe à condition que l'idéologie de celui-ci<br />
ne conteste les intérêts de l'association et que la neutralité de l'association soit conservée.<br />
<br />
=====Art. 3 new:=====<br />
'''L'association poursuit son action dans une stricte indépendance politique, idéologique et religieuse.'''<br />
Elle offre son expertise et sa fonction consultative à tout organe à condition que l'idéologie de celui-ci<br />
ne conteste les intérêts de l'association et que la neutralité de l'association soit conservée.<br />
<br />
----<br />
<br />
=====Art. 4 old:=====<br />
La durée de l'association est illimitée.<br />
<br />
=====Art. 4 new:=====<br />
La durée de l'association est illimitée. '''Elle pourra être dissoute en tout temps.'''<br />
<br />
----<br />
<br />
=====Art. 6 old:=====<br />
La cotisation est fixée par l'assemblée générale.<br />
L'association encourage une cotisation reflètant les moyens financiers des membres respectifs.<br />
Toutefois, elle ne pourra dépasser 600 € par an.<br />
<br />
=====Art. 6 new:=====<br />
La cotisation '''annuelle''' est fixée par l'Assemblée Générale. '''Il est loisible aux membres de cotiser au rythme mensuel.'''<br />
L'association encourage une cotisation reflétant les moyens financiers des membres respectifs.<br />
Toutefois, elle ne pourra dépasser 600 € par an.<br />
<br />
----<br />
<br />
=====Art. 7 old:=====<br />
Tout membre de l'association peut démissionner à tout moment.<br />
Est d'office démissionnaire le membre qui, après un délai de trois mois à compter de l'Assemblée Générale ordinaire, n'a pas payé les cotisations lui incombant.<br />
<br />
=====Art. 7 new:=====<br />
Tout membre de l'association peut démissionner à tout moment.<br />
Est d'office démissionnaire le membre qui,<br />
'''soit''' après un délai de trois mois à compter de l'Assemblée Générale ordinaire n'a pas payé la cotisation lui incombant,<br />
'''soit accuse un retard supérieur à trois mois sur la cotisation mensuelle'''. <br />
<br />
----<br />
<br />
=====Art. 8 old:=====<br />
Tout membre lésant d'une manière quelconque les intérêts de l'association peut en être exclu.<br />
<s>Cette exclusion se fait par vote secret et à majorité qualifiée du Conseil d'Administration.</s><br />
<br />
=====Art. 8 new:=====<br />
Tout membre lésant d'une manière quelconque les intérêts de l'association peut en être exclu '''par ordonnance du Conseil d'Administration'''.<br />
'''L’exclusion devra être confirmée par l’assemblée générale des membres statuant à la majorité des deux tiers des suffrages.'''<br />
'''Elle ne peut avoir lieu que pour un motif grave, l’intéressé ayant été entendu dans sa justification.'''<br />
<br />
----<br />
<br />
=====Art. 9 old:=====<br />
L'association est administrée par un Conseil d'Administration de trois membres au moins et<br />
de dix au plus, dont un secrétaire général, un secrétaire adjoint et un trésorier, élus par<br />
l'Assemblée Générale.<br />
<br />
* <s>L'élection des secrétaires fait l'objet d'un vote à part.</s><br />
* Les élections des secrétaires et des membres du Conseil d'Administration se font par vote secret et à la majorité simple.<br />
* Un Administrateur sortant est rééligible.<br />
* Les candidats doivent être membres effectifs et majeurs.<br />
* Les candidatures doivent être adressées au Conseil d'Administration avant le début de l'Assemblée Générale.<br />
<br />
<s>En cas de vacance d'un poste au Conseil d'Administration, ce dernier aura la faculté de désigner parmi les membres effectifs<br />
de l'association un suppléant dont la mission prendra fin à l'Assemblée Générale suivantes.</s><br />
<br />
<s>En outre, le conseil peut s'adjoindre, à l'unanimité, soit temporairement, soit définitivement, des<br />
personnes même non - membres actifs auxquels il délègue des pouvoirs spéciaux et qu'il charge d'une mission spéciale.<br />
Ces personnes n'ont toutefois que voix consultative aux réunions du Conseil d'Administration.</s><br />
<br />
=====Art. 9 new:=====<br />
L'association est administrée par un Conseil d'Administration '''composé''' de trois membres au moins et de dix au plus, dont un secrétaire général,<br />
un secrétaire adjoint et un trésorier <b>élus à la majorité simple des voix présentes et représentées à l’Assemblée Générale</b>.<br />
<br />
* la mandature est d'une année à partir de l'assemblé générale ordinaire;<br />
* le vote se fait par bulletins secrets, chaque membre effectif disposant d'un bulletin;<br />
* un administrateur sortant '''n’est pas re-élu d'office''' mais peut se porter candidat;<br />
* les candidats doivent être membres effectifs et majeurs à la date de l'assemblée générale;<br />
* les candidatures '''pour un mandat d'administration doivent être adressées par écrit au Conseil d'Administration au moins 48 heures avant l'Assemblée Générale;'''<br />
* chaque membre dispose d'autant de voix qu'il y a de postes à pourvoir et peut donner au maximum deux voix à chaque candidat.<br />
<br />
Le Conseil d’Administration ainsi élue choisi, parmi ses membres, un secrétaire général, un secrétaire adjoint et un trésorier.<br />
Il est tenu de respecter la distribution des voix attribuées aux administrateurs.<br />
<br />
----<br />
<br />
=====Art. 10 new:=====<br />
Tout administrateur peut démissioner à tout moment par voie de notification écrite au Conseil d’Administration ou - dans le cas d’une démission de <br />
l’ensemble des administrateurs - à l’Assemblé Générale. La démission n’entrera en vigueur qu’au moment où un successeur a été élu ou co-opté.<br />
<br />
En cas de démission du conseil d’administration tout entier, les administrateurs en exercice seront tenus de continuer à remplir leurs fonctions<br />
jusqu'à ce que leur démission soit acceptée par l'Assemblée Générale.<br />
<br />
En cas de vacance d'un poste au Conseil d'Administration, ce dernier aura la faculté de désigner, à l'unanimité, parmi les membres effectifs de<br />
l'association un suppléant dont la mission prendra fin à l'Assemblée Générale suivante.<br />
<br />
----<br />
<br />
Art. 10 → Art. 11<br />
<br />
----<br />
<br />
=====Art. 12 new:=====<br />
En outre, le Conseil peut s'adjoindre, à l'unanimité, soit temporairement, soit définitivement, des personnes même non - membres actifs auxquels<br />
il délègue des pouvoirs spéciaux et qu'il charge d'une mission spéciale. Ces personnes n'ont toutefois que voix consultative aux réunions du Conseil d'Administration.<br />
<br />
----<br />
<br />
=====Art. 11 old:=====<br />
Le Conseil d'Administration se réunit sur convocation d'un secrétaire ou sur demande d'un autre Administreur (sic).<br />
Il ne peut délibérer valablement que si la moitié plus un de ses membres sont présents.<br />
Les décisions du Conseil d'Administration sont prises à la majorité simple.<br />
En cas d'égalité des voix, celles des secrétaires présents sont prépondérantes.<br />
<br />
=====Art. 13 new:=====<br />
Le Conseil d’Administration se réunit sur convocation d'un secrétaire ou sur demande de la majorité du conseil.<br />
Il ne peut valablement délibérer que si la majorité de ses membres est présente.<br />
Les décisions du Conseil d'Administration sont prises à la majorité des deux tiers des présents.<br />
En cas d’égalité des voix, celles des secrétaires présents sont prépondérantes.<br />
Toutes les décisions ainsi prises obligent les membres.<br />
<br />
----<br />
<br />
=====Art. 12 old:=====<br />
Une délibération de l'Assemblée Générale est nécessaire pour les objets suivants:<br />
1. la modification des statuts,<br />
2. <s>l'élection du Conseil administratif,</s><br />
3. l'approbation des comptes,<br />
4. la dissolution de l'association<br />
<br />
=====Art. 14 new:=====<br />
Une délibération de l'Assemblée Générale est nécessaire pour les objets suivants:<br />
1. la modification des statuts,<br />
2. '''la nomination et révocation des administrateurs et réviseurs de caisse'''<br />
3. l'approbation des comptes,<br />
4. la dissolution de l'association<br />
5. '''l'exclusion d'un membre'''<br />
<br />
'''Note:''' this allows us to '''entirely remove Arts. 17 and 21'''<br />
<br />
=====Art. 17. old=====<br />
<s>L'Assemblée Générale délibère et vote sur les questions qui lui sont déférées par les présents statuts et par le Conseil d'Administration,<br />
qui soumet à son approbation le compte des recettes et des dépenses.<br />
L'Assemblée Générale désigne parmi les membres effectifs au moins deux réviseurs de caisse,<br />
qui, après avoir vérifié les comptes, présentent un rapport à l'Assemblée Générale.</s><br />
<br />
=====Art. 21 old=====<br />
<s>L'Assemblée Générale ne peut prononcer la dissolution de l'association que si les deux tiers de ses membres sont présents.</s><br />
<br />
----<br />
<br />
=====Art. 13 old:=====<br />
L'Assemblée Générale se rassemble au moins une fois par année en date et au lieu fixé par la convocation.<br />
La convocation, émise par le Conseil d'Administration, est faite par écrit avec un préavis de deux semaines au moins et comporte l'ordre du jour.<br />
Si toutefois la convocation écrite n'est pas envoyée dans le délais prévu de deux semaines,<br />
les membres pourront être convoqués par tout membre avec un préavis d'une semaine avec l'accord d'un quart des membres effectifs.<br />
Il est loisible aux membres de se faire représenter par un autre membre dûment mandaté.<br />
Chaque membre ne peut représenter tout au plus qu'un autre membre.<br />
<br />
=====Art. 15 new:=====<br />
L'Assemblée Générale, '''qui se compose de tous les membres effectifs de l'association''', se rassemble au moins une fois par année en date et au lieu fixé par la convocation.<br />
La convocation <b>de l'assemblée générale se fait au moins quinze jours avant la date fixé,<br />
moyennant simple lettre missive ou courrier électronique devant mentionner l'ordre du jour proposé.</b><br />
Il est loisible aux membres de se faire représenter par un autre membre <b>moyennant une procuration</b>.<br />
Chaque membre présent ne peut faire valoir qu'une seule procuration.<br />
<br />
----<br />
<br />
=====Art. 14 old:=====<br />
Les membres sont convoqués en Assemblée Générale chaque fois que le <s>Conseil d'Administration</s> le juge nécessaire ou que le quart des membres effectifs l'exige.<br />
<br />
=====Art. 16 new:=====<br />
Les membres sont convoqués en Assemblée Générale chaque fois que le Conseil d’Administration le juge nécessaire ou que le quart des membres effectifs l'exige.<br />
<br />
<b>Les décisions de l’Assemblé Générale seront portées à connaissance des membres et des tiers par un rapport qui sera diffusé par courriel et déposé au Registre de Commerce.</b><br />
<br />
----<br />
<br />
Art. 15 → Art. 17<br />
<br />
Art. 16 → Art. 18<br />
<br />
----<br />
<br />
=====Art. 18 old:=====<br />
Chapitre VI – Gérance <s>du Local dit</s> « Hackerspace »<br />
L'espace surnommé « Hackerspace » est géré par <s>les secrétaires</s> de l'association. <br />
<s>S'y ajoute un groupe de travail composé de membres effectifs spécifiquement désignés par le Conseil d'Administration.</s><br />
<br />
=====Art. 19 new:=====<br />
Chapitre VI – Gérance <b>des locaux de l’association</b><br />
Les locaux sous gestion de l’association sont gérés par '''le Conseil d'Administration''' de l'association.<br />
<b>Il est loisible au Conseil de désigner, parmi les membres effectifs,<br />
une ou plusieurs personnes chargées avec la gestion courante/journalière d’un local qu'ils exerceront en bon père de famille.</b><br />
<br />
----<br />
<br />
=====Art. 19 old:=====<br />
Tout projet <s>doit être présenté au CA, afin que celui-ci puisse évaluer ses coûts et ses<br />
répercussions. Le CA peut interdire l'exécution d'un projet s'il le juge nécessaire.</s><br />
<br />
=====Art. 20 new:=====<br />
Tout projet <b>initié dans un local doit être porté à connaissance du Conseil d'Administration.<br />
Le Conseil se réserve le droit d'interdire ou d'avorter l'exécution d'un projet s'il<br />
le juge nécessaire.</b><br />
<br />
----<br />
<br />
=====Art. 20 old:=====<br />
L'association dispose d'un règlement interne, validé par l'Assemblée Générale sur<br />
proposition du Conseil d'Administration, spécifiant les conditions d'utilisation et d'accès au local dit « Hackerspace » ainsi que toute autres<br />
dispositions nécessaires au bon fonctionnement de l'association.<br />
<br />
=====Art. 21 new:=====<br />
L'association dispose d'un règlement interne, validé par l'Assemblée Générale sur proposition du Conseil d'Administration,<br />
spécifiant les conditions d'utilisation et d'accès aux locaux ainsi que toute autre disposition nécessaires au bon fonctionnement de l'association.<br />
<br />
----<br />
<br />
Art. 22 --> Art. 22<br />
<br />
----<br />
<br />
===== Art. 23 new: =====<br />
Pour l’ensemble des documents et signatures requises par la loi et les présents statuts, un courrier électronique<br />
signé à l’aide d’une clé PGP ou d’un autre certificat émis par une autorité légale reconnue équivaut lettre missive signée à la main.<br />
<br />
----<br />
<br />
Art. 23 old --> Art. 24 new<br />
<br />
==== Texte coordonné ====<br />
There is also a [[Media:Statutes 2012 - Texte coordonné.pdf|new version of the complete statutes]] available for your reading pleasure. You can also read and '''comment on it''' over at [https://docs.google.com/document/d/1bYDIwEjHe7qiRQU5WikF1Bio9hiv8jr8pFFA7WqAjjs/edit Google Docs].</div>Slopjong//wiki.syn2cat.lu/wiki/General_Assembly_March_2012General Assembly March 20122012-03-17T12:12:46Z<p>Slopjong: </p>
<hr />
<div>{{Event<br />
|attendees=Kwisatz, Thierry, Sid, The metalgamer, Sim0n, Gunstick, Slopjong, Macfreak109, Azunix, Steve, Prometheus, Bartek, Muling, Perforin, Destructive, NPU, Pascal, Qu4x, Nick17, <br />
|eventtype=Meeting<br />
|subtitle=General Assembly March 2012<br />
|description=With another successful year gone by, and the number of members still growing, we come to the point in time where another General<br />
Assembly (GA) is to take place.<br />
|contact=Macfreak109,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2012/03/17 18:00<br />
|till=2012/03/17 21:00<br />
|location=Hackerspace, Strassen<br />
|announce=no<br />
|cost=0 EUR<br />
|u19=no<br />
}}<br />
== Introduction ==<br />
The email that was sent - on February 26th - with the same content as in this page serves as a formal invitation to the General Assembly on March 17th 2012 taking place at the [[Hackerspace, Strassen|hackerspace in Strassen]], starting at 6pm (18h00). All members (regardless of state) are called on to participate.<br />
== Agenda ==<br />
The agenda for the General Assembly is composed of the following points:<br />
<br />
* Welcoming speech by the office representatives<br />
* Presentation and discussion of modifications to the statutes (this includes new people in the board)<br />
* Presentation of 2011's receipts and expenditures<br />
* Discharge of the treasurer by our auditors (gunstick, emQue)<br />
* Election of a new administrative council<br />
* Election of a new treasurer<br />
* Election of two new secretaries<br />
* Call for two financial auditors for 2012<br />
<br />
== Important ==<br />
There are a couple of additional things you should know:<br />
<br />
=== Attendance ===<br />
'''A)''' In order to conclude this general assembly, '''we need 2/3 of our members ( = 29 members) to be present''' or be represented by another member.<br />
Else the GA has to be rescheduled. Thus we urge you to mark the date in your calendar and be present. This is important for us and for you!<br />
<br />
'''B)''' If you cannot attend the assembly personally, you're allowed and even encouraged to have yourself represented by an adult person of your choice. We will accept either pgp-signed emails or analogue signatures as prove of this delegation on that same day. Note that at the GA you are only allowed to represent one other person.<br />
<br />
=== Administrative Council ===<br />
'''C)''' You're also encouraged to stand for elections. Note that if you want to stand for elections to the positions of Secretary-General or Secretary-Deputy, you need to apply twice (once for the council, once for the position of Secretary)<br />
<br />
;How to apply for either election: At least 24 hours prior to the GA, i.e. latest at 17:59 on March 16th 2011, you need to send a PRIVATE email to the current council at office_AT_hackerspace_DOT_lu<br />
<br />
Also remember that we decided on the 2010 GA that every applicant to the position of Secretary should present his ideas and goals for the forthcoming legislative period (year). [A 5 min lightning talk is totally ok]<br />
<br />
For simplicity's sake, we ask that even members of the current council submit their applications.<br />
<br />
=== Amendments to the statutes ===<br />
'''D)''' Amendments to the statutes must also be entered at least 24hours before the General Assembly takes place and equally be sent to office@hackerspace.lu<br />
<br />
The current version of our statutes can be found [[Media:Syn2cat-statuts_290311.pdf|here]].<br/><br />
<br />
==== Suggested amendments ====<br />
Please sign your amendments: send a PGP signed mail to office@hackerspace.lu<br />
<br />
===== Change of payment rule --[[User:Gunstick|Gunstick]] =====<br />
<br />
Art6 old<br />
La cotisation est fixée par l'assemblée générale. [...]<br />
Art6 new<br />
La cotisation et le mode de payement sont fixés par l'assemblée générale. [...]<br />
<br />
----<br />
<br />
Art7 old<br />
[...] Est d'office démissionnaire le membre qui, après un delai de trois mois à compter [...] incombant.<br />
Art7 new<br />
[...] Est d'office démissionnaire le membre qui n'est pas en règle concernant ses cotisations.<br />
<br />
Note: new article 6 needs an additional vote by the general assembly on the following :<br />
* Membership fees are to be paid either yearly or monthly<br />
* Yearly payments are due on 1st January<br />
* Montly payments are due on every 1st of the month<br />
* Payment reminders are sent after 14 days of missing payment <br />
* Members are in violation of paying their fees if after 3 expired reminders they<br />
* still have not paid<br />
or<br />
* have not explained to office the reasons for lack of payment<br />
<br />
===== Rename of office members --[[User:Gunstick|Gunstick]] =====<br />
<br />
'''Motivation:''' Currently we have the following title in the office: secretary general, deputy secretary, treasurer. The aim of this modification is to call the to the more popular luxemburgish designations: president, secretary and treasurer.<br />
<br />
Art 9 old<br />
L'association est administrée par un Conseil d'Administration de trois membres au moins et<br />
de dix au plus, dont un secrétaire général, un secrétaire adjoint et un trésorier, [...] Le trésorier et secrétaires sont élus par<br />
vote séparé parmi les candidats aux postes en question.<br />
[...]<br />
* Le secrétaire général est celui ayant obtenu le plus de voix dans l'élection séparée des secrétaires.<br />
<br />
Art 9 new<br />
L'association est administrée par un Conseil d'Administration de trois membres au moins et<br />
de dix au plus, dont le comité composé d'un président, d'un secrétaire et d'un trésorier [...] Le comité est élu par<br />
vote séparé parmi les candidats aux postes en question.<br />
[...]<br />
* Le président est celui ayant obtenu le plus de voix dans l'élection séparée entre président et secrétaire<br />
<br />
----<br />
<br />
Art 10 old<br />
L'association est valablement engagée par la signature d'un secrétaire (genéral ou adjoint)<br />
et d'un membre du Conseil d'Administration.<br />
Art 10 new<br />
L'association est valablement engagée par la signature d'un membre du comité<br />
et d'un membre du Conseil d'Administration.<br />
<br />
----<br />
<br />
Art 11 old<br />
[...] En cas d'égalité des voix, celles des secrétaires présents sont prépondérantes.<br />
Art 11 new<br />
[...] En cas d'égalité des voix, celles du président ou secrétaire sont prépondérantes.<br />
<br />
----<br />
<br />
Art. 18. old<br />
L'espace surnommé « Hackerspace » est géré par les secrétaires de l'association. [...plus membres désignés...]<br />
Art. 18. new<br />
L'espace surnommé « Hackerspace » est géré par le comité de l'association. [...plus membres désignés...]<br />
<br />
===== Fix unlawful statements --[[User:Kwisatz|Kwisatz]] =====<br />
<br />
'''Motivation:''' Currently we have some unlawful statements in our statutes. In order not to loose our status as a judicial person, we need to fix these.<br />
<br />
Art. 1 new:<br />
[...]<br />
(change siege)<br />
Add: Le siège pourra être transféré à n'importe quel autre lieu du Grand Duché sur simple<br />
décision du Conseil d'Administration.<br />
<br />
----<br />
<br />
Art. 8 old:<br />
Tout membre lésant d'une manière quelconque les intérêts de l'association peut en être exclu.<br />
Cette exclusion se fait par vote secret et à majorité qualifiée du Conseil d'Administration.<br />
<br />
Art. 8 new:<br />
Tout membre lésant d'une manière quelconque les intérêts de l'association peut en être exclu.<br />
A partir de la proposition d'exclusion formulée par le conseil d'administration, jusqu'à la<br />
décision définitive de l'assemblée générale statuant à la majorité des deux tiers des voix,<br />
le membre dont l'exclusion est envisagée est suspendu de plein droit de ses fonctions sociales.<br />
<br />
----<br />
<br />
Art. 12 old<br />
Une délibération de l'Assemblée Générale est nécessaire pour les objets suivants:<br />
1. la modification des statuts,<br />
2. l'élection du Conseil administratif,<br />
3. l'approbation des comptes,<br />
4. la dissolution de l'association<br />
<br />
Art. 12 new<br />
Une délibération de l'Assemblée Générale est nécessaire pour les objets suivants:<br />
1. la modification des statuts,<br />
2. le changement de l'objet de l'association<br />
3. nomination et révocation des administrateurs et réviseurs de caisse<br />
4. l'approbation des comptes,<br />
5. la dissolution de l'association<br />
6. l'exclusion d'un associé<br />
<br />
'''Note:''' this allows us to '''entirely remove Art. 17'''<br />
----<br />
<br />
Art. 14 old<br />
Les membres sont convoqués en Assemblée Générale chaque fois que le Conseil<br />
d'Administration le juge nécessaire ou que le cinquième des membres effectifs l'exige.<br />
<br />
Art. 15 new<br />
Les membres sont convoqués en Assemblée Générale chaque fois que le Conseil<br />
d'Administration le juge nécessaire ou que le quart des membres effectifs l'exige.<br />
<br />
L'assemblée ne peut valablement délibérer que si les deux tiers des membres sont<br />
présents ou représentés.<br />
<br />
Ses décisions seront portées à connaissance des membres et des tiers par un rapport qui<br />
sera diffusé par courriel et déposé au Registre de Commerce.<br />
<br />
===== Changes related to the objectives --[[User:Kwisatz|Kwisatz]] =====<br />
<br />
'''Motivation:''' The current statutes do not allow us to manage more than one hackerspace. Also, if we're already making quite some changes, we can just as good clarify a few points.<br />
<br />
Art. 2 old<br />
L'association a pour but, dans les domaines artistiques, culturelles et de nouvelles technologies:<br />
* d'encourager, de soutenir et de s'investir dans des projets d'éducation et/ou de "R&D" (recherche et développement);<br />
* de rassembler des associations et individus intéressés des projets des susdits domaines,<br />
* d'organiser des manifestations culturelles, artistiques ou autres afin de poursuivre les objectifs susdits.<br />
<br />
Pour réaliser les objectifs susdits, l'association:<br />
* fait la gestion ainsi que l'exploitation d'un local surnommé "Hackerspace",<br />
* mets à dispostion aux diverses associations et individus intéressés une infrastructure élaborée (locaux, matériel informatique, électronique, artisanal...)<br />
<br />
Art. 2 new<br />
L'association a pour objet, dans les domaines artistiques, culturelles et des nouvelles technologies:<br />
* d'encourager, de soutenir et de s'investir dans des projets d'éducation et de la recherche et du développement);<br />
* de rassembler des associations et individus intéressés des projets des susdits domaines,<br />
* d'organiser des manifestations culturelles, artistiques ou autres afin de poursuivre les objectifs susdits.<br />
* de gérer et d'exploiter un ou plusieurs locales surnommés "Hackerspace",<br />
* de mettre à disposition d'autres associations et individus une infrastructure élaborée (locaux, matériel informatique, électronique, artisanal...)<br />
<br />
----<br />
<br />
Art. 3 old<br />
L'association est politiquement indépendante. Elle offre son expertise et sa fonction consultative à tout organe à condition que l'idéologie de celui-ci ne conteste les intérêts de l'association et que la neutralité de l'association soit conservée.<br />
<br />
Art. 3 new<br />
L'association poursuit son action dans une stricte indépendance politique, idéologique et religieuse. <br />
Elle offre son expertise et sa fonction consultative à tout organe à condition que l'idéologie de celui-ci ne conteste les intérêts de l'association et que la neutralité de l'association soit conservée.<br />
<br />
----<br />
<br />
Art. 4 old<br />
La durée de l'association est illimitée.<br />
<br />
Art. 4 new<br />
La durée de l'association est illimitée. Elle pourra être dissoute en tout temps.<br />
<br />
----<br />
<br />
Art. 6 old<br />
La cotisation est fixée par l'assemblée générale.<br />
L'association encourage une cotisation reflètant les moyens financiers des membres respectifs.<br />
Toutefois, elle ne pourra dépasser 600 € par an.<br />
<br />
Art. 6 new<br />
La cotisation annuelle est fixée par l'assemblée générale. Il est loisible aux membres de cotiser au rythme mensuel.<br />
L'association encourage une cotisation reflétant les moyens financiers des membres respectifs.<br />
Toutefois, elle ne pourra dépasser 600 € par an.<br />
<br />
----<br />
<br />
Art. 7 old<br />
Tout membre de l'association peut démissionner à tout moment.<br />
Est d'office démissionnaire le membre qui, après un délai de trois mois à compter de l'Assemblée Générale ordinaire, n'a pas payé les cotisations lui incombant.<br />
<br />
Art. 7 new<br />
Tout membre de l'association peut démissionner à tout moment.<br />
Est d'office démissionnaire le membre qui, soit après un délai de trois mois à compter de l'Assemblée Générale ordinaire n'a pas payé la cotisation lui incombant, soit accuse un retard supérieur à trois mois sur la cotisation mensuelle.<br />
<br />
===== Simplifications and clarifications --[[User:Kwisatz|Kwisatz]] =====<br />
<br />
''' Motivation:''' The goal of these changes is to simplify and clarify the election procedure at the general meeting as well as other parts of the statutes. We will leave out parts that are handled by the law anyway.<br />
<br />
Art. 9 old<br />
L'association est administrée par un Conseil d'Administration de trois membres au moins et<br />
de dix au plus, dont un secrétaire général, un secrétaire adjoint et un trésorier, élus par bulletins<br />
secrets, chaque membre effectif disposant d'un bulletin. Le trésorier et secrétaires sont élus par<br />
vote séparé parmi les candidats aux postes en question.<br />
<br />
• Un administrateur sortant peut se porter candidat.<br />
• Les candidats doivent être membres effectifs et majeurs à la date de l'assemblée générale.<br />
• Les candidatures doivent être adressées au Conseil d'Administration avant le début de<br />
l'Assemblée Générale.<br />
• Un bulletin valable est anonyme, sauf par nécessité d'une procédure de vote par<br />
correspondance.<br />
• Chaque membre dispose d'autant de voix qu'il y a de postes à pourvoir et peut donner au<br />
maximum une voix à chaque candidat.<br />
• Accèdent au second tour autant de candidats qu'il a de postes à pourvoir. Ils sont<br />
sélectionnés par ordre décroissant des voix reçues.<br />
• Sont élus les candidats remportant au second tour l'assentiment de 50% des bulletins<br />
valablement exprimés.<br />
• Le secrétaire général est celui ayant obtenu le plus de voix dans l'élection séparée des<br />
secrétaires.<br />
<br />
En cas de vacance d'un poste au Conseil d'Administration, ce dernier aura la faculté de désigner<br />
parmi les membres effectifs de l'association un suppléant dont la mission prendra fin à l'Assemblée<br />
Générale suivantes.<br />
<br />
En outre, le conseil peut s'adjoindre, à l'unanimité, soit temporairement, soit définitivement, des<br />
personnes même non - membres actifs auxquels il délègue des pouvoirs spéciaux et qu'il charge<br />
d'une mission spéciale. Ces personnes n'ont toutefois que voix consultative aux réunions du<br />
Conseil d'Administration.<br />
<br />
Art. 9 new<br />
L'association est administrée par un Conseil d'Administration composé de trois membres au moins et<br />
de dix au plus, dont un secrétaire général, un secrétaire adjoint et un trésorier élus à la majorité<br />
simple des voix présentes à l'assemblée générale.<br />
<br />
• La mandature est d'une année à partir de l'assemblé générale ordinaire.<br />
• Le vote se fait par bulletins secrets, chaque membre effectif disposant d'un bulletin.<br />
• Le trésorier et secrétaires sont élus par vote séparé parmi les candidats aux postes en question.<br />
• Un administrateur sortant peut se porter candidat.<br />
• Les candidats doivent être membres effectifs et majeurs à la date de l'assemblée générale.<br />
• Les candidatures doivent être adressées au Conseil d'Administration avant le début de<br />
l'Assemblée Générale.<br />
• Chaque membre dispose d'autant de voix qu'il y a de postes à pourvoir et peut donner au<br />
maximum une voix à chaque candidat.<br />
• Le secrétaire général est celui ayant obtenu le plus de voix dans l'élection séparée des<br />
secrétaires.<br />
<br />
En cas de vacance d'un poste au Conseil d'Administration, ce dernier aura la faculté de désigner, <br />
à l'unanimité parmi les membres effectifs de l'association un suppléant dont la mission prendra<br />
fin à l'Assemblée Générale suivante.<br />
<br />
En outre, le conseil peut s'adjoindre, à l'unanimité, soit temporairement, soit définitivement, des<br />
personnes même non - membres actifs auxquels il délègue des pouvoirs spéciaux et qu'il charge<br />
d'une mission spéciale. Ces personnes n'ont toutefois que voix consultative aux réunions du<br />
Conseil d'Administration.<br />
<br />
----<br />
<br />
Art. 13 new<br />
L'exercice budgetaire commence le 1er janvier de chaque année. Les comptes sont arrêtés le<br />
31 décembre et soumis à l'assemblée générale avec le rapport des réviseurs de caisse. A fin<br />
d'examen, l'assemblée désigne un réviseur de caisse. Le mandat de celui-ci est incompatible<br />
avec celui d'administrateur en exercice.<br />
<br />
----<br />
<br />
Art. 13 old<br />
L'Assemblée Générale se rassemble au moins une fois par année en date et au lieu fixé<br />
par la convocation. La convocation, émise par le Conseil d'Administration, est faite par écrit avec<br />
un préavis de deux semaines au moins et comporte l'ordre du jour.<br />
<br />
Si toutefois la convocation écrite n'est pas envoyée dans le délais prévu de deux semaines, les<br />
membres pourront être convoqués par tout membre avec un préavis d'une semaine avec l'accord<br />
d'un quart des membres effectifs.<br />
<br />
Il est loisible aux membres de se faire représenter par un autre membre dûment mandaté. Chaque<br />
membre ne peut représenter tout au plus qu'un autre membre.<br />
<br />
Art. 14 new<br />
L’assemblée générale, qui se compose de tous les membres de l'association, se rassemble au moins<br />
une fois par année en date et au lieu fixé par la convocation.<br />
La convocation de l'assemblée générale se fait au moins quatorze jours avant la date fixé,<br />
moyennant simple lettre missive ou courrier électronique devant mentionner l'ordre du jour proposé.<br />
<br />
Il est loisible aux membres de se faire représenter par un autre membre moyennant une procuration<br />
soit missive, soit signée électroniquement à l'aide d'une clé PGP. Chaque membre ne peut<br />
représenter tout au plus qu'un autre membre.<br />
<br />
----<br />
<br />
Art. 21 old<br />
This article can be entirely scraped due to the changes to articles 12 and 14 (old numbering).<br />
<br />
===== Changes necessary to manage multiple spaces --[[User:Kwisatz|Kwisatz]] =====<br />
<br />
Art. 18 old<br />
Chapitre VI – Gérance du Local dit « Hackerspace »<br />
Art. 18. L'espace surnommé « Hackerspace » est géré par les secrétaires de l'association. S'y<br />
ajoute un groupe de travail composé de membres effectifs spécifiquement désignés par le Conseil<br />
d'Administration.<br />
<br />
Art. 19 new<br />
Chapitre VI – Gérance de locaux dits « Hackerspace »<br />
Art. 18. Le conseil d'administration gère le budget et les comptes d'un ou de plusieurs locaux<br />
surnommés "Hackerspace". Le conseil d'administration charge une ou plusieurs personnes par local<br />
de sa gestion journalière qu'ils exerceront en bon père de famille.<br />
<br />
----<br />
<br />
Art. 19 old<br />
Tout projet doit être présenté au CA, afin que celui-ci puisse évaluer ses coûts et ses<br />
répercussions. Le CA peut interdire l'exécution d'un projet s'il le juge nécessaire.<br />
<br />
Art. 20 new<br />
Tout projet initié dans un "hackerspace" doit être porté à connaissance du conseil d'administration.<br />
Le conseil d'administration se réserve le droit d'interdire ou d'avorter l'exécution d'un projet s'il<br />
le juge nécessaire.<br />
<br />
----<br />
<br />
Art. 20 old<br />
L'association dispose d'un règlement interne, validé par l'Assemblée Générale sur<br />
proposition du Conseil d'Administration, spécifiant les conditions d'utilisation et d'accès au local dit<br />
« Hackerspace » ainsi que toute autres dispositions nécessaires au bon fonctionnement de<br />
l'association.<br />
<br />
Art. 21 new<br />
Chaque local dispose d'un règlement interne, validé par l'assemblée générale sur proposition du conseil<br />
d'administration, spécifiant les conditions d'utilisation et d'accès au locaux ainsi que toute autre<br />
disposition nécessaire au bon fonctionnement de l'association.<br />
<br />
===== Spelling mistakes --[[User:Kwisatz|Kwisatz]] =====<br />
'''Motivation:''': just fixing spelling mistakes.<br />
<br />
Art. 11 diff<br />
[...] ou sur demande d'un autre Administrateur. [...]<br />
<br />
=== Proxies ===<br />
* Bartek -> Kwisatz (by PGP signed mail)<br />
* NPU -> Gunstick (by PGP signed mail)<br />
* Nick17 -> Sim0n (unsigned email, phone for verification)<br />
* muling -> mich (by PGP signed mail)<br />
* qu4x -> prometheus (unsigned email, phone for verification)<br />
* pascal -> slopjong (unsigned email, phone for verification)<br />
* hardfalcon -> ???<br />
* lala -> destructive<br />
* trollchen -> ??? <br />
* bisly -> ???</div>Slopjong//wiki.syn2cat.lu/wiki/General_Assembly_March_2012General Assembly March 20122012-03-17T12:10:59Z<p>Slopjong: </p>
<hr />
<div>{{Event<br />
|attendees=Kwisatz, Thierry, Sid, The metalgamer, Sim0n, Gunstick, Slopjong, Macfreak109, Azunix, Steve, Prometheus, Bartek, Muling, Perforin, Destructive, NPU, Pascal<br />
|eventtype=Meeting<br />
|subtitle=General Assembly March 2012<br />
|description=With another successful year gone by, and the number of members still growing, we come to the point in time where another General<br />
Assembly (GA) is to take place.<br />
|contact=Macfreak109,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2012/03/17 18:00<br />
|till=2012/03/17 21:00<br />
|location=Hackerspace, Strassen<br />
|announce=no<br />
|cost=0 EUR<br />
|u19=no<br />
}}<br />
== Introduction ==<br />
The email that was sent - on February 26th - with the same content as in this page serves as a formal invitation to the General Assembly on March 17th 2012 taking place at the [[Hackerspace, Strassen|hackerspace in Strassen]], starting at 6pm (18h00). All members (regardless of state) are called on to participate.<br />
== Agenda ==<br />
The agenda for the General Assembly is composed of the following points:<br />
<br />
* Welcoming speech by the office representatives<br />
* Presentation and discussion of modifications to the statutes (this includes new people in the board)<br />
* Presentation of 2011's receipts and expenditures<br />
* Discharge of the treasurer by our auditors (gunstick, emQue)<br />
* Election of a new administrative council<br />
* Election of a new treasurer<br />
* Election of two new secretaries<br />
* Call for two financial auditors for 2012<br />
<br />
== Important ==<br />
There are a couple of additional things you should know:<br />
<br />
=== Attendance ===<br />
'''A)''' In order to conclude this general assembly, '''we need 2/3 of our members ( = 29 members) to be present''' or be represented by another member.<br />
Else the GA has to be rescheduled. Thus we urge you to mark the date in your calendar and be present. This is important for us and for you!<br />
<br />
'''B)''' If you cannot attend the assembly personally, you're allowed and even encouraged to have yourself represented by an adult person of your choice. We will accept either pgp-signed emails or analogue signatures as prove of this delegation on that same day. Note that at the GA you are only allowed to represent one other person.<br />
<br />
=== Administrative Council ===<br />
'''C)''' You're also encouraged to stand for elections. Note that if you want to stand for elections to the positions of Secretary-General or Secretary-Deputy, you need to apply twice (once for the council, once for the position of Secretary)<br />
<br />
;How to apply for either election: At least 24 hours prior to the GA, i.e. latest at 17:59 on March 16th 2011, you need to send a PRIVATE email to the current council at office_AT_hackerspace_DOT_lu<br />
<br />
Also remember that we decided on the 2010 GA that every applicant to the position of Secretary should present his ideas and goals for the forthcoming legislative period (year). [A 5 min lightning talk is totally ok]<br />
<br />
For simplicity's sake, we ask that even members of the current council submit their applications.<br />
<br />
=== Amendments to the statutes ===<br />
'''D)''' Amendments to the statutes must also be entered at least 24hours before the General Assembly takes place and equally be sent to office@hackerspace.lu<br />
<br />
The current version of our statutes can be found [[Media:Syn2cat-statuts_290311.pdf|here]].<br/><br />
<br />
==== Suggested amendments ====<br />
Please sign your amendments: send a PGP signed mail to office@hackerspace.lu<br />
<br />
===== Change of payment rule --[[User:Gunstick|Gunstick]] =====<br />
<br />
Art6 old<br />
La cotisation est fixée par l'assemblée générale. [...]<br />
Art6 new<br />
La cotisation et le mode de payement sont fixés par l'assemblée générale. [...]<br />
<br />
----<br />
<br />
Art7 old<br />
[...] Est d'office démissionnaire le membre qui, après un delai de trois mois à compter [...] incombant.<br />
Art7 new<br />
[...] Est d'office démissionnaire le membre qui n'est pas en règle concernant ses cotisations.<br />
<br />
Note: new article 6 needs an additional vote by the general assembly on the following :<br />
* Membership fees are to be paid either yearly or monthly<br />
* Yearly payments are due on 1st January<br />
* Montly payments are due on every 1st of the month<br />
* Payment reminders are sent after 14 days of missing payment <br />
* Members are in violation of paying their fees if after 3 expired reminders they<br />
* still have not paid<br />
or<br />
* have not explained to office the reasons for lack of payment<br />
<br />
===== Rename of office members --[[User:Gunstick|Gunstick]] =====<br />
<br />
'''Motivation:''' Currently we have the following title in the office: secretary general, deputy secretary, treasurer. The aim of this modification is to call the to the more popular luxemburgish designations: president, secretary and treasurer.<br />
<br />
Art 9 old<br />
L'association est administrée par un Conseil d'Administration de trois membres au moins et<br />
de dix au plus, dont un secrétaire général, un secrétaire adjoint et un trésorier, [...] Le trésorier et secrétaires sont élus par<br />
vote séparé parmi les candidats aux postes en question.<br />
[...]<br />
* Le secrétaire général est celui ayant obtenu le plus de voix dans l'élection séparée des secrétaires.<br />
<br />
Art 9 new<br />
L'association est administrée par un Conseil d'Administration de trois membres au moins et<br />
de dix au plus, dont le comité composé d'un président, d'un secrétaire et d'un trésorier [...] Le comité est élu par<br />
vote séparé parmi les candidats aux postes en question.<br />
[...]<br />
* Le président est celui ayant obtenu le plus de voix dans l'élection séparée entre président et secrétaire<br />
<br />
----<br />
<br />
Art 10 old<br />
L'association est valablement engagée par la signature d'un secrétaire (genéral ou adjoint)<br />
et d'un membre du Conseil d'Administration.<br />
Art 10 new<br />
L'association est valablement engagée par la signature d'un membre du comité<br />
et d'un membre du Conseil d'Administration.<br />
<br />
----<br />
<br />
Art 11 old<br />
[...] En cas d'égalité des voix, celles des secrétaires présents sont prépondérantes.<br />
Art 11 new<br />
[...] En cas d'égalité des voix, celles du président ou secrétaire sont prépondérantes.<br />
<br />
----<br />
<br />
Art. 18. old<br />
L'espace surnommé « Hackerspace » est géré par les secrétaires de l'association. [...plus membres désignés...]<br />
Art. 18. new<br />
L'espace surnommé « Hackerspace » est géré par le comité de l'association. [...plus membres désignés...]<br />
<br />
===== Fix unlawful statements --[[User:Kwisatz|Kwisatz]] =====<br />
<br />
'''Motivation:''' Currently we have some unlawful statements in our statutes. In order not to loose our status as a judicial person, we need to fix these.<br />
<br />
Art. 1 new:<br />
[...]<br />
(change siege)<br />
Add: Le siège pourra être transféré à n'importe quel autre lieu du Grand Duché sur simple<br />
décision du Conseil d'Administration.<br />
<br />
----<br />
<br />
Art. 8 old:<br />
Tout membre lésant d'une manière quelconque les intérêts de l'association peut en être exclu.<br />
Cette exclusion se fait par vote secret et à majorité qualifiée du Conseil d'Administration.<br />
<br />
Art. 8 new:<br />
Tout membre lésant d'une manière quelconque les intérêts de l'association peut en être exclu.<br />
A partir de la proposition d'exclusion formulée par le conseil d'administration, jusqu'à la<br />
décision définitive de l'assemblée générale statuant à la majorité des deux tiers des voix,<br />
le membre dont l'exclusion est envisagée est suspendu de plein droit de ses fonctions sociales.<br />
<br />
----<br />
<br />
Art. 12 old<br />
Une délibération de l'Assemblée Générale est nécessaire pour les objets suivants:<br />
1. la modification des statuts,<br />
2. l'élection du Conseil administratif,<br />
3. l'approbation des comptes,<br />
4. la dissolution de l'association<br />
<br />
Art. 12 new<br />
Une délibération de l'Assemblée Générale est nécessaire pour les objets suivants:<br />
1. la modification des statuts,<br />
2. le changement de l'objet de l'association<br />
3. nomination et révocation des administrateurs et réviseurs de caisse<br />
4. l'approbation des comptes,<br />
5. la dissolution de l'association<br />
6. l'exclusion d'un associé<br />
<br />
'''Note:''' this allows us to '''entirely remove Art. 17'''<br />
----<br />
<br />
Art. 14 old<br />
Les membres sont convoqués en Assemblée Générale chaque fois que le Conseil<br />
d'Administration le juge nécessaire ou que le cinquième des membres effectifs l'exige.<br />
<br />
Art. 15 new<br />
Les membres sont convoqués en Assemblée Générale chaque fois que le Conseil<br />
d'Administration le juge nécessaire ou que le quart des membres effectifs l'exige.<br />
<br />
L'assemblée ne peut valablement délibérer que si les deux tiers des membres sont<br />
présents ou représentés.<br />
<br />
Ses décisions seront portées à connaissance des membres et des tiers par un rapport qui<br />
sera diffusé par courriel et déposé au Registre de Commerce.<br />
<br />
===== Changes related to the objectives --[[User:Kwisatz|Kwisatz]] =====<br />
<br />
'''Motivation:''' The current statutes do not allow us to manage more than one hackerspace. Also, if we're already making quite some changes, we can just as good clarify a few points.<br />
<br />
Art. 2 old<br />
L'association a pour but, dans les domaines artistiques, culturelles et de nouvelles technologies:<br />
* d'encourager, de soutenir et de s'investir dans des projets d'éducation et/ou de "R&D" (recherche et développement);<br />
* de rassembler des associations et individus intéressés des projets des susdits domaines,<br />
* d'organiser des manifestations culturelles, artistiques ou autres afin de poursuivre les objectifs susdits.<br />
<br />
Pour réaliser les objectifs susdits, l'association:<br />
* fait la gestion ainsi que l'exploitation d'un local surnommé "Hackerspace",<br />
* mets à dispostion aux diverses associations et individus intéressés une infrastructure élaborée (locaux, matériel informatique, électronique, artisanal...)<br />
<br />
Art. 2 new<br />
L'association a pour objet, dans les domaines artistiques, culturelles et des nouvelles technologies:<br />
* d'encourager, de soutenir et de s'investir dans des projets d'éducation et de la recherche et du développement);<br />
* de rassembler des associations et individus intéressés des projets des susdits domaines,<br />
* d'organiser des manifestations culturelles, artistiques ou autres afin de poursuivre les objectifs susdits.<br />
* de gérer et d'exploiter un ou plusieurs locales surnommés "Hackerspace",<br />
* de mettre à disposition d'autres associations et individus une infrastructure élaborée (locaux, matériel informatique, électronique, artisanal...)<br />
<br />
----<br />
<br />
Art. 3 old<br />
L'association est politiquement indépendante. Elle offre son expertise et sa fonction consultative à tout organe à condition que l'idéologie de celui-ci ne conteste les intérêts de l'association et que la neutralité de l'association soit conservée.<br />
<br />
Art. 3 new<br />
L'association poursuit son action dans une stricte indépendance politique, idéologique et religieuse. <br />
Elle offre son expertise et sa fonction consultative à tout organe à condition que l'idéologie de celui-ci ne conteste les intérêts de l'association et que la neutralité de l'association soit conservée.<br />
<br />
----<br />
<br />
Art. 4 old<br />
La durée de l'association est illimitée.<br />
<br />
Art. 4 new<br />
La durée de l'association est illimitée. Elle pourra être dissoute en tout temps.<br />
<br />
----<br />
<br />
Art. 6 old<br />
La cotisation est fixée par l'assemblée générale.<br />
L'association encourage une cotisation reflètant les moyens financiers des membres respectifs.<br />
Toutefois, elle ne pourra dépasser 600 € par an.<br />
<br />
Art. 6 new<br />
La cotisation annuelle est fixée par l'assemblée générale. Il est loisible aux membres de cotiser au rythme mensuel.<br />
L'association encourage une cotisation reflétant les moyens financiers des membres respectifs.<br />
Toutefois, elle ne pourra dépasser 600 € par an.<br />
<br />
----<br />
<br />
Art. 7 old<br />
Tout membre de l'association peut démissionner à tout moment.<br />
Est d'office démissionnaire le membre qui, après un délai de trois mois à compter de l'Assemblée Générale ordinaire, n'a pas payé les cotisations lui incombant.<br />
<br />
Art. 7 new<br />
Tout membre de l'association peut démissionner à tout moment.<br />
Est d'office démissionnaire le membre qui, soit après un délai de trois mois à compter de l'Assemblée Générale ordinaire n'a pas payé la cotisation lui incombant, soit accuse un retard supérieur à trois mois sur la cotisation mensuelle.<br />
<br />
===== Simplifications and clarifications --[[User:Kwisatz|Kwisatz]] =====<br />
<br />
''' Motivation:''' The goal of these changes is to simplify and clarify the election procedure at the general meeting as well as other parts of the statutes. We will leave out parts that are handled by the law anyway.<br />
<br />
Art. 9 old<br />
L'association est administrée par un Conseil d'Administration de trois membres au moins et<br />
de dix au plus, dont un secrétaire général, un secrétaire adjoint et un trésorier, élus par bulletins<br />
secrets, chaque membre effectif disposant d'un bulletin. Le trésorier et secrétaires sont élus par<br />
vote séparé parmi les candidats aux postes en question.<br />
<br />
• Un administrateur sortant peut se porter candidat.<br />
• Les candidats doivent être membres effectifs et majeurs à la date de l'assemblée générale.<br />
• Les candidatures doivent être adressées au Conseil d'Administration avant le début de<br />
l'Assemblée Générale.<br />
• Un bulletin valable est anonyme, sauf par nécessité d'une procédure de vote par<br />
correspondance.<br />
• Chaque membre dispose d'autant de voix qu'il y a de postes à pourvoir et peut donner au<br />
maximum une voix à chaque candidat.<br />
• Accèdent au second tour autant de candidats qu'il a de postes à pourvoir. Ils sont<br />
sélectionnés par ordre décroissant des voix reçues.<br />
• Sont élus les candidats remportant au second tour l'assentiment de 50% des bulletins<br />
valablement exprimés.<br />
• Le secrétaire général est celui ayant obtenu le plus de voix dans l'élection séparée des<br />
secrétaires.<br />
<br />
En cas de vacance d'un poste au Conseil d'Administration, ce dernier aura la faculté de désigner<br />
parmi les membres effectifs de l'association un suppléant dont la mission prendra fin à l'Assemblée<br />
Générale suivantes.<br />
<br />
En outre, le conseil peut s'adjoindre, à l'unanimité, soit temporairement, soit définitivement, des<br />
personnes même non - membres actifs auxquels il délègue des pouvoirs spéciaux et qu'il charge<br />
d'une mission spéciale. Ces personnes n'ont toutefois que voix consultative aux réunions du<br />
Conseil d'Administration.<br />
<br />
Art. 9 new<br />
L'association est administrée par un Conseil d'Administration composé de trois membres au moins et<br />
de dix au plus, dont un secrétaire général, un secrétaire adjoint et un trésorier élus à la majorité<br />
simple des voix présentes à l'assemblée générale.<br />
<br />
• La mandature est d'une année à partir de l'assemblé générale ordinaire.<br />
• Le vote se fait par bulletins secrets, chaque membre effectif disposant d'un bulletin.<br />
• Le trésorier et secrétaires sont élus par vote séparé parmi les candidats aux postes en question.<br />
• Un administrateur sortant peut se porter candidat.<br />
• Les candidats doivent être membres effectifs et majeurs à la date de l'assemblée générale.<br />
• Les candidatures doivent être adressées au Conseil d'Administration avant le début de<br />
l'Assemblée Générale.<br />
• Chaque membre dispose d'autant de voix qu'il y a de postes à pourvoir et peut donner au<br />
maximum une voix à chaque candidat.<br />
• Le secrétaire général est celui ayant obtenu le plus de voix dans l'élection séparée des<br />
secrétaires.<br />
<br />
En cas de vacance d'un poste au Conseil d'Administration, ce dernier aura la faculté de désigner, <br />
à l'unanimité parmi les membres effectifs de l'association un suppléant dont la mission prendra<br />
fin à l'Assemblée Générale suivante.<br />
<br />
En outre, le conseil peut s'adjoindre, à l'unanimité, soit temporairement, soit définitivement, des<br />
personnes même non - membres actifs auxquels il délègue des pouvoirs spéciaux et qu'il charge<br />
d'une mission spéciale. Ces personnes n'ont toutefois que voix consultative aux réunions du<br />
Conseil d'Administration.<br />
<br />
----<br />
<br />
Art. 13 new<br />
L'exercice budgetaire commence le 1er janvier de chaque année. Les comptes sont arrêtés le<br />
31 décembre et soumis à l'assemblée générale avec le rapport des réviseurs de caisse. A fin<br />
d'examen, l'assemblée désigne un réviseur de caisse. Le mandat de celui-ci est incompatible<br />
avec celui d'administrateur en exercice.<br />
<br />
----<br />
<br />
Art. 13 old<br />
L'Assemblée Générale se rassemble au moins une fois par année en date et au lieu fixé<br />
par la convocation. La convocation, émise par le Conseil d'Administration, est faite par écrit avec<br />
un préavis de deux semaines au moins et comporte l'ordre du jour.<br />
<br />
Si toutefois la convocation écrite n'est pas envoyée dans le délais prévu de deux semaines, les<br />
membres pourront être convoqués par tout membre avec un préavis d'une semaine avec l'accord<br />
d'un quart des membres effectifs.<br />
<br />
Il est loisible aux membres de se faire représenter par un autre membre dûment mandaté. Chaque<br />
membre ne peut représenter tout au plus qu'un autre membre.<br />
<br />
Art. 14 new<br />
L’assemblée générale, qui se compose de tous les membres de l'association, se rassemble au moins<br />
une fois par année en date et au lieu fixé par la convocation.<br />
La convocation de l'assemblée générale se fait au moins quatorze jours avant la date fixé,<br />
moyennant simple lettre missive ou courrier électronique devant mentionner l'ordre du jour proposé.<br />
<br />
Il est loisible aux membres de se faire représenter par un autre membre moyennant une procuration<br />
soit missive, soit signée électroniquement à l'aide d'une clé PGP. Chaque membre ne peut<br />
représenter tout au plus qu'un autre membre.<br />
<br />
----<br />
<br />
Art. 21 old<br />
This article can be entirely scraped due to the changes to articles 12 and 14 (old numbering).<br />
<br />
===== Changes necessary to manage multiple spaces --[[User:Kwisatz|Kwisatz]] =====<br />
<br />
Art. 18 old<br />
Chapitre VI – Gérance du Local dit « Hackerspace »<br />
Art. 18. L'espace surnommé « Hackerspace » est géré par les secrétaires de l'association. S'y<br />
ajoute un groupe de travail composé de membres effectifs spécifiquement désignés par le Conseil<br />
d'Administration.<br />
<br />
Art. 19 new<br />
Chapitre VI – Gérance de locaux dits « Hackerspace »<br />
Art. 18. Le conseil d'administration gère le budget et les comptes d'un ou de plusieurs locaux<br />
surnommés "Hackerspace". Le conseil d'administration charge une ou plusieurs personnes par local<br />
de sa gestion journalière qu'ils exerceront en bon père de famille.<br />
<br />
----<br />
<br />
Art. 19 old<br />
Tout projet doit être présenté au CA, afin que celui-ci puisse évaluer ses coûts et ses<br />
répercussions. Le CA peut interdire l'exécution d'un projet s'il le juge nécessaire.<br />
<br />
Art. 20 new<br />
Tout projet initié dans un "hackerspace" doit être porté à connaissance du conseil d'administration.<br />
Le conseil d'administration se réserve le droit d'interdire ou d'avorter l'exécution d'un projet s'il<br />
le juge nécessaire.<br />
<br />
----<br />
<br />
Art. 20 old<br />
L'association dispose d'un règlement interne, validé par l'Assemblée Générale sur<br />
proposition du Conseil d'Administration, spécifiant les conditions d'utilisation et d'accès au local dit<br />
« Hackerspace » ainsi que toute autres dispositions nécessaires au bon fonctionnement de<br />
l'association.<br />
<br />
Art. 21 new<br />
Chaque local dispose d'un règlement interne, validé par l'assemblée générale sur proposition du conseil<br />
d'administration, spécifiant les conditions d'utilisation et d'accès au locaux ainsi que toute autre<br />
disposition nécessaire au bon fonctionnement de l'association.<br />
<br />
===== Spelling mistakes --[[User:Kwisatz|Kwisatz]] =====<br />
'''Motivation:''': just fixing spelling mistakes.<br />
<br />
Art. 11 diff<br />
[...] ou sur demande d'un autre Administrateur. [...]<br />
<br />
=== Proxies ===<br />
* Bartek -> Kwisatz (by PGP signed mail)<br />
* NPU -> Gunstick (by PGP signed mail)<br />
* Nick17 -> Sim0n (unsigned email, phone for verification)<br />
* muling -> mich (by PGP signed mail)<br />
* qu4x -> prometheus (unsigned email, phone for verification)<br />
* pascal -> slopjong (unsigned email, phone for verification)<br />
* hardfalcon -> ???<br />
* lala -> destructive<br />
* trollchen -> ??? <br />
* bisly -> ???</div>Slopjong//wiki.syn2cat.lu/wiki/General_Assembly_March_2012General Assembly March 20122012-03-17T12:09:42Z<p>Slopjong: </p>
<hr />
<div>{{Event<br />
|attendees=Kwisatz, Thierry, Sid, The metalgamer, Sim0n, Gunstick, Slopjong, Macfreak109, Azunix, Steve, Prometheus, Bartek, Muling, Perforin, Destructive, NPU, <br />
|eventtype=Meeting<br />
|subtitle=General Assembly March 2012<br />
|description=With another successful year gone by, and the number of members still growing, we come to the point in time where another General<br />
Assembly (GA) is to take place.<br />
|contact=Macfreak109,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2012/03/17 18:00<br />
|till=2012/03/17 21:00<br />
|location=Hackerspace, Strassen<br />
|announce=on<br />
|cost=0 EUR<br />
|u19=on<br />
}}<br />
== Introduction ==<br />
The email that was sent - on February 26th - with the same content as in this page serves as a formal invitation to the General Assembly on March 17th 2012 taking place at the [[Hackerspace, Strassen|hackerspace in Strassen]], starting at 6pm (18h00). All members (regardless of state) are called on to participate.<br />
== Agenda ==<br />
The agenda for the General Assembly is composed of the following points:<br />
<br />
* Welcoming speech by the office representatives<br />
* Presentation and discussion of modifications to the statutes (this includes new people in the board)<br />
* Presentation of 2011's receipts and expenditures<br />
* Discharge of the treasurer by our auditors (gunstick, emQue)<br />
* Election of a new administrative council<br />
* Election of a new treasurer<br />
* Election of two new secretaries<br />
* Call for two financial auditors for 2012<br />
<br />
== Important ==<br />
There are a couple of additional things you should know:<br />
<br />
=== Attendance ===<br />
'''A)''' In order to conclude this general assembly, '''we need 2/3 of our members ( = 29 members) to be present''' or be represented by another member.<br />
Else the GA has to be rescheduled. Thus we urge you to mark the date in your calendar and be present. This is important for us and for you!<br />
<br />
'''B)''' If you cannot attend the assembly personally, you're allowed and even encouraged to have yourself represented by an adult person of your choice. We will accept either pgp-signed emails or analogue signatures as prove of this delegation on that same day. Note that at the GA you are only allowed to represent one other person.<br />
<br />
=== Administrative Council ===<br />
'''C)''' You're also encouraged to stand for elections. Note that if you want to stand for elections to the positions of Secretary-General or Secretary-Deputy, you need to apply twice (once for the council, once for the position of Secretary)<br />
<br />
;How to apply for either election: At least 24 hours prior to the GA, i.e. latest at 17:59 on March 16th 2011, you need to send a PRIVATE email to the current council at office_AT_hackerspace_DOT_lu<br />
<br />
Also remember that we decided on the 2010 GA that every applicant to the position of Secretary should present his ideas and goals for the forthcoming legislative period (year). [A 5 min lightning talk is totally ok]<br />
<br />
For simplicity's sake, we ask that even members of the current council submit their applications.<br />
<br />
=== Amendments to the statutes ===<br />
'''D)''' Amendments to the statutes must also be entered at least 24hours before the General Assembly takes place and equally be sent to office@hackerspace.lu<br />
<br />
The current version of our statutes can be found [[Media:Syn2cat-statuts_290311.pdf|here]].<br/><br />
<br />
==== Suggested amendments ====<br />
Please sign your amendments: send a PGP signed mail to office@hackerspace.lu<br />
<br />
===== Change of payment rule --[[User:Gunstick|Gunstick]] =====<br />
<br />
Art6 old<br />
La cotisation est fixée par l'assemblée générale. [...]<br />
Art6 new<br />
La cotisation et le mode de payement sont fixés par l'assemblée générale. [...]<br />
<br />
----<br />
<br />
Art7 old<br />
[...] Est d'office démissionnaire le membre qui, après un delai de trois mois à compter [...] incombant.<br />
Art7 new<br />
[...] Est d'office démissionnaire le membre qui n'est pas en règle concernant ses cotisations.<br />
<br />
Note: new article 6 needs an additional vote by the general assembly on the following :<br />
* Membership fees are to be paid either yearly or monthly<br />
* Yearly payments are due on 1st January<br />
* Montly payments are due on every 1st of the month<br />
* Payment reminders are sent after 14 days of missing payment <br />
* Members are in violation of paying their fees if after 3 expired reminders they<br />
* still have not paid<br />
or<br />
* have not explained to office the reasons for lack of payment<br />
<br />
===== Rename of office members --[[User:Gunstick|Gunstick]] =====<br />
<br />
'''Motivation:''' Currently we have the following title in the office: secretary general, deputy secretary, treasurer. The aim of this modification is to call the to the more popular luxemburgish designations: president, secretary and treasurer.<br />
<br />
Art 9 old<br />
L'association est administrée par un Conseil d'Administration de trois membres au moins et<br />
de dix au plus, dont un secrétaire général, un secrétaire adjoint et un trésorier, [...] Le trésorier et secrétaires sont élus par<br />
vote séparé parmi les candidats aux postes en question.<br />
[...]<br />
* Le secrétaire général est celui ayant obtenu le plus de voix dans l'élection séparée des secrétaires.<br />
<br />
Art 9 new<br />
L'association est administrée par un Conseil d'Administration de trois membres au moins et<br />
de dix au plus, dont le comité composé d'un président, d'un secrétaire et d'un trésorier [...] Le comité est élu par<br />
vote séparé parmi les candidats aux postes en question.<br />
[...]<br />
* Le président est celui ayant obtenu le plus de voix dans l'élection séparée entre président et secrétaire<br />
<br />
----<br />
<br />
Art 10 old<br />
L'association est valablement engagée par la signature d'un secrétaire (genéral ou adjoint)<br />
et d'un membre du Conseil d'Administration.<br />
Art 10 new<br />
L'association est valablement engagée par la signature d'un membre du comité<br />
et d'un membre du Conseil d'Administration.<br />
<br />
----<br />
<br />
Art 11 old<br />
[...] En cas d'égalité des voix, celles des secrétaires présents sont prépondérantes.<br />
Art 11 new<br />
[...] En cas d'égalité des voix, celles du président ou secrétaire sont prépondérantes.<br />
<br />
----<br />
<br />
Art. 18. old<br />
L'espace surnommé « Hackerspace » est géré par les secrétaires de l'association. [...plus membres désignés...]<br />
Art. 18. new<br />
L'espace surnommé « Hackerspace » est géré par le comité de l'association. [...plus membres désignés...]<br />
<br />
===== Fix unlawful statements --[[User:Kwisatz|Kwisatz]] =====<br />
<br />
'''Motivation:''' Currently we have some unlawful statements in our statutes. In order not to loose our status as a judicial person, we need to fix these.<br />
<br />
Art. 1 new:<br />
[...]<br />
(change siege)<br />
Add: Le siège pourra être transféré à n'importe quel autre lieu du Grand Duché sur simple<br />
décision du Conseil d'Administration.<br />
<br />
----<br />
<br />
Art. 8 old:<br />
Tout membre lésant d'une manière quelconque les intérêts de l'association peut en être exclu.<br />
Cette exclusion se fait par vote secret et à majorité qualifiée du Conseil d'Administration.<br />
<br />
Art. 8 new:<br />
Tout membre lésant d'une manière quelconque les intérêts de l'association peut en être exclu.<br />
A partir de la proposition d'exclusion formulée par le conseil d'administration, jusqu'à la<br />
décision définitive de l'assemblée générale statuant à la majorité des deux tiers des voix,<br />
le membre dont l'exclusion est envisagée est suspendu de plein droit de ses fonctions sociales.<br />
<br />
----<br />
<br />
Art. 12 old<br />
Une délibération de l'Assemblée Générale est nécessaire pour les objets suivants:<br />
1. la modification des statuts,<br />
2. l'élection du Conseil administratif,<br />
3. l'approbation des comptes,<br />
4. la dissolution de l'association<br />
<br />
Art. 12 new<br />
Une délibération de l'Assemblée Générale est nécessaire pour les objets suivants:<br />
1. la modification des statuts,<br />
2. le changement de l'objet de l'association<br />
3. nomination et révocation des administrateurs et réviseurs de caisse<br />
4. l'approbation des comptes,<br />
5. la dissolution de l'association<br />
6. l'exclusion d'un associé<br />
<br />
'''Note:''' this allows us to '''entirely remove Art. 17'''<br />
----<br />
<br />
Art. 14 old<br />
Les membres sont convoqués en Assemblée Générale chaque fois que le Conseil<br />
d'Administration le juge nécessaire ou que le cinquième des membres effectifs l'exige.<br />
<br />
Art. 15 new<br />
Les membres sont convoqués en Assemblée Générale chaque fois que le Conseil<br />
d'Administration le juge nécessaire ou que le quart des membres effectifs l'exige.<br />
<br />
L'assemblée ne peut valablement délibérer que si les deux tiers des membres sont<br />
présents ou représentés.<br />
<br />
Ses décisions seront portées à connaissance des membres et des tiers par un rapport qui<br />
sera diffusé par courriel et déposé au Registre de Commerce.<br />
<br />
===== Changes related to the objectives --[[User:Kwisatz|Kwisatz]] =====<br />
<br />
'''Motivation:''' The current statutes do not allow us to manage more than one hackerspace. Also, if we're already making quite some changes, we can just as good clarify a few points.<br />
<br />
Art. 2 old<br />
L'association a pour but, dans les domaines artistiques, culturelles et de nouvelles technologies:<br />
* d'encourager, de soutenir et de s'investir dans des projets d'éducation et/ou de "R&D" (recherche et développement);<br />
* de rassembler des associations et individus intéressés des projets des susdits domaines,<br />
* d'organiser des manifestations culturelles, artistiques ou autres afin de poursuivre les objectifs susdits.<br />
<br />
Pour réaliser les objectifs susdits, l'association:<br />
* fait la gestion ainsi que l'exploitation d'un local surnommé "Hackerspace",<br />
* mets à dispostion aux diverses associations et individus intéressés une infrastructure élaborée (locaux, matériel informatique, électronique, artisanal...)<br />
<br />
Art. 2 new<br />
L'association a pour objet, dans les domaines artistiques, culturelles et des nouvelles technologies:<br />
* d'encourager, de soutenir et de s'investir dans des projets d'éducation et de la recherche et du développement);<br />
* de rassembler des associations et individus intéressés des projets des susdits domaines,<br />
* d'organiser des manifestations culturelles, artistiques ou autres afin de poursuivre les objectifs susdits.<br />
* de gérer et d'exploiter un ou plusieurs locales surnommés "Hackerspace",<br />
* de mettre à disposition d'autres associations et individus une infrastructure élaborée (locaux, matériel informatique, électronique, artisanal...)<br />
<br />
----<br />
<br />
Art. 3 old<br />
L'association est politiquement indépendante. Elle offre son expertise et sa fonction consultative à tout organe à condition que l'idéologie de celui-ci ne conteste les intérêts de l'association et que la neutralité de l'association soit conservée.<br />
<br />
Art. 3 new<br />
L'association poursuit son action dans une stricte indépendance politique, idéologique et religieuse. <br />
Elle offre son expertise et sa fonction consultative à tout organe à condition que l'idéologie de celui-ci ne conteste les intérêts de l'association et que la neutralité de l'association soit conservée.<br />
<br />
----<br />
<br />
Art. 4 old<br />
La durée de l'association est illimitée.<br />
<br />
Art. 4 new<br />
La durée de l'association est illimitée. Elle pourra être dissoute en tout temps.<br />
<br />
----<br />
<br />
Art. 6 old<br />
La cotisation est fixée par l'assemblée générale.<br />
L'association encourage une cotisation reflètant les moyens financiers des membres respectifs.<br />
Toutefois, elle ne pourra dépasser 600 € par an.<br />
<br />
Art. 6 new<br />
La cotisation annuelle est fixée par l'assemblée générale. Il est loisible aux membres de cotiser au rythme mensuel.<br />
L'association encourage une cotisation reflétant les moyens financiers des membres respectifs.<br />
Toutefois, elle ne pourra dépasser 600 € par an.<br />
<br />
----<br />
<br />
Art. 7 old<br />
Tout membre de l'association peut démissionner à tout moment.<br />
Est d'office démissionnaire le membre qui, après un délai de trois mois à compter de l'Assemblée Générale ordinaire, n'a pas payé les cotisations lui incombant.<br />
<br />
Art. 7 new<br />
Tout membre de l'association peut démissionner à tout moment.<br />
Est d'office démissionnaire le membre qui, soit après un délai de trois mois à compter de l'Assemblée Générale ordinaire n'a pas payé la cotisation lui incombant, soit accuse un retard supérieur à trois mois sur la cotisation mensuelle.<br />
<br />
===== Simplifications and clarifications --[[User:Kwisatz|Kwisatz]] =====<br />
<br />
''' Motivation:''' The goal of these changes is to simplify and clarify the election procedure at the general meeting as well as other parts of the statutes. We will leave out parts that are handled by the law anyway.<br />
<br />
Art. 9 old<br />
L'association est administrée par un Conseil d'Administration de trois membres au moins et<br />
de dix au plus, dont un secrétaire général, un secrétaire adjoint et un trésorier, élus par bulletins<br />
secrets, chaque membre effectif disposant d'un bulletin. Le trésorier et secrétaires sont élus par<br />
vote séparé parmi les candidats aux postes en question.<br />
<br />
• Un administrateur sortant peut se porter candidat.<br />
• Les candidats doivent être membres effectifs et majeurs à la date de l'assemblée générale.<br />
• Les candidatures doivent être adressées au Conseil d'Administration avant le début de<br />
l'Assemblée Générale.<br />
• Un bulletin valable est anonyme, sauf par nécessité d'une procédure de vote par<br />
correspondance.<br />
• Chaque membre dispose d'autant de voix qu'il y a de postes à pourvoir et peut donner au<br />
maximum une voix à chaque candidat.<br />
• Accèdent au second tour autant de candidats qu'il a de postes à pourvoir. Ils sont<br />
sélectionnés par ordre décroissant des voix reçues.<br />
• Sont élus les candidats remportant au second tour l'assentiment de 50% des bulletins<br />
valablement exprimés.<br />
• Le secrétaire général est celui ayant obtenu le plus de voix dans l'élection séparée des<br />
secrétaires.<br />
<br />
En cas de vacance d'un poste au Conseil d'Administration, ce dernier aura la faculté de désigner<br />
parmi les membres effectifs de l'association un suppléant dont la mission prendra fin à l'Assemblée<br />
Générale suivantes.<br />
<br />
En outre, le conseil peut s'adjoindre, à l'unanimité, soit temporairement, soit définitivement, des<br />
personnes même non - membres actifs auxquels il délègue des pouvoirs spéciaux et qu'il charge<br />
d'une mission spéciale. Ces personnes n'ont toutefois que voix consultative aux réunions du<br />
Conseil d'Administration.<br />
<br />
Art. 9 new<br />
L'association est administrée par un Conseil d'Administration composé de trois membres au moins et<br />
de dix au plus, dont un secrétaire général, un secrétaire adjoint et un trésorier élus à la majorité<br />
simple des voix présentes à l'assemblée générale.<br />
<br />
• La mandature est d'une année à partir de l'assemblé générale ordinaire.<br />
• Le vote se fait par bulletins secrets, chaque membre effectif disposant d'un bulletin.<br />
• Le trésorier et secrétaires sont élus par vote séparé parmi les candidats aux postes en question.<br />
• Un administrateur sortant peut se porter candidat.<br />
• Les candidats doivent être membres effectifs et majeurs à la date de l'assemblée générale.<br />
• Les candidatures doivent être adressées au Conseil d'Administration avant le début de<br />
l'Assemblée Générale.<br />
• Chaque membre dispose d'autant de voix qu'il y a de postes à pourvoir et peut donner au<br />
maximum une voix à chaque candidat.<br />
• Le secrétaire général est celui ayant obtenu le plus de voix dans l'élection séparée des<br />
secrétaires.<br />
<br />
En cas de vacance d'un poste au Conseil d'Administration, ce dernier aura la faculté de désigner, <br />
à l'unanimité parmi les membres effectifs de l'association un suppléant dont la mission prendra<br />
fin à l'Assemblée Générale suivante.<br />
<br />
En outre, le conseil peut s'adjoindre, à l'unanimité, soit temporairement, soit définitivement, des<br />
personnes même non - membres actifs auxquels il délègue des pouvoirs spéciaux et qu'il charge<br />
d'une mission spéciale. Ces personnes n'ont toutefois que voix consultative aux réunions du<br />
Conseil d'Administration.<br />
<br />
----<br />
<br />
Art. 13 new<br />
L'exercice budgetaire commence le 1er janvier de chaque année. Les comptes sont arrêtés le<br />
31 décembre et soumis à l'assemblée générale avec le rapport des réviseurs de caisse. A fin<br />
d'examen, l'assemblée désigne un réviseur de caisse. Le mandat de celui-ci est incompatible<br />
avec celui d'administrateur en exercice.<br />
<br />
----<br />
<br />
Art. 13 old<br />
L'Assemblée Générale se rassemble au moins une fois par année en date et au lieu fixé<br />
par la convocation. La convocation, émise par le Conseil d'Administration, est faite par écrit avec<br />
un préavis de deux semaines au moins et comporte l'ordre du jour.<br />
<br />
Si toutefois la convocation écrite n'est pas envoyée dans le délais prévu de deux semaines, les<br />
membres pourront être convoqués par tout membre avec un préavis d'une semaine avec l'accord<br />
d'un quart des membres effectifs.<br />
<br />
Il est loisible aux membres de se faire représenter par un autre membre dûment mandaté. Chaque<br />
membre ne peut représenter tout au plus qu'un autre membre.<br />
<br />
Art. 14 new<br />
L’assemblée générale, qui se compose de tous les membres de l'association, se rassemble au moins<br />
une fois par année en date et au lieu fixé par la convocation.<br />
La convocation de l'assemblée générale se fait au moins quatorze jours avant la date fixé,<br />
moyennant simple lettre missive ou courrier électronique devant mentionner l'ordre du jour proposé.<br />
<br />
Il est loisible aux membres de se faire représenter par un autre membre moyennant une procuration<br />
soit missive, soit signée électroniquement à l'aide d'une clé PGP. Chaque membre ne peut<br />
représenter tout au plus qu'un autre membre.<br />
<br />
----<br />
<br />
Art. 21 old<br />
This article can be entirely scraped due to the changes to articles 12 and 14 (old numbering).<br />
<br />
===== Changes necessary to manage multiple spaces --[[User:Kwisatz|Kwisatz]] =====<br />
<br />
Art. 18 old<br />
Chapitre VI – Gérance du Local dit « Hackerspace »<br />
Art. 18. L'espace surnommé « Hackerspace » est géré par les secrétaires de l'association. S'y<br />
ajoute un groupe de travail composé de membres effectifs spécifiquement désignés par le Conseil<br />
d'Administration.<br />
<br />
Art. 19 new<br />
Chapitre VI – Gérance de locaux dits « Hackerspace »<br />
Art. 18. Le conseil d'administration gère le budget et les comptes d'un ou de plusieurs locaux<br />
surnommés "Hackerspace". Le conseil d'administration charge une ou plusieurs personnes par local<br />
de sa gestion journalière qu'ils exerceront en bon père de famille.<br />
<br />
----<br />
<br />
Art. 19 old<br />
Tout projet doit être présenté au CA, afin que celui-ci puisse évaluer ses coûts et ses<br />
répercussions. Le CA peut interdire l'exécution d'un projet s'il le juge nécessaire.<br />
<br />
Art. 20 new<br />
Tout projet initié dans un "hackerspace" doit être porté à connaissance du conseil d'administration.<br />
Le conseil d'administration se réserve le droit d'interdire ou d'avorter l'exécution d'un projet s'il<br />
le juge nécessaire.<br />
<br />
----<br />
<br />
Art. 20 old<br />
L'association dispose d'un règlement interne, validé par l'Assemblée Générale sur<br />
proposition du Conseil d'Administration, spécifiant les conditions d'utilisation et d'accès au local dit<br />
« Hackerspace » ainsi que toute autres dispositions nécessaires au bon fonctionnement de<br />
l'association.<br />
<br />
Art. 21 new<br />
Chaque local dispose d'un règlement interne, validé par l'assemblée générale sur proposition du conseil<br />
d'administration, spécifiant les conditions d'utilisation et d'accès au locaux ainsi que toute autre<br />
disposition nécessaire au bon fonctionnement de l'association.<br />
<br />
===== Spelling mistakes --[[User:Kwisatz|Kwisatz]] =====<br />
'''Motivation:''': just fixing spelling mistakes.<br />
<br />
Art. 11 diff<br />
[...] ou sur demande d'un autre Administrateur. [...]<br />
<br />
=== Proxies ===<br />
* Bartek -> Kwisatz (by PGP signed mail)<br />
* NPU -> Gunstick (by PGP signed mail)<br />
* Nick17 -> Sim0n (unsigned email, phone for verification)<br />
* muling -> mich (by PGP signed mail)<br />
* qu4x -> prometheus (unsigned email, phone for verification)<br />
* pascal -> slopjong (unsigned email, phone for verification)<br />
* hardfalcon -> ???<br />
* lala -> destructive<br />
* trollchen -> ??? <br />
* bisly -> ???</div>Slopjong//wiki.syn2cat.lu/wiki/General_Assembly_March_2012General Assembly March 20122012-03-11T01:58:32Z<p>Slopjong: Edited automatically from page AGMarch2012.</p>
<hr />
<div>{{Event<br />
|attendees=Kwisatz, Thierry, Sid, The metalgamer, Sim0n, Gunstick, Slopjong<br />
|eventtype=Meeting<br />
|subtitle=General Assembly March 2012<br />
|description=With another successful year gone by, and the number of members still growing, we come to the point in time where another General<br />
Assembly (GA) is to take place.<br />
|contact=Macfreak109,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2012/03/17 18:00<br />
|till=2012/03/17 21:00<br />
|location=Hackerspace, Strassen<br />
|announce=<br />
|cost=0 EUR<br />
|u19=<br />
}}<br />
== Introduction ==<br />
The email that was sent - on February 26th - with the same content as in this page serves as a formal invitation to the General Assembly on March 17th 2012 taking place at the [[Hackerspace, Strassen|hackerspace in Strassen]], starting at 6pm (18h00).<br />
== Agenda ==<br />
The agenda for the General Assembly is composed of the following points:<br />
<br />
* Welcoming speech by the office representatives<br />
* Presentation and discussion of modifications to the statutes (this includes new people in the board)<br />
* Presentation of 2011's receipts and expenditures<br />
* Discharge of the treasurer by our auditors (gunstick, emQue)<br />
* Election of a new administrative council<br />
* Election of a new treasurer<br />
* Election of two new secretaries<br />
* Call for two financial auditors for 2012<br />
<br />
== Important ==<br />
There are a couple of additional things you should know:<br />
<br />
=== Attendance ===<br />
'''A)''' In order to conclude this general assembly, we need 2/3 of our members '''( = 29 members)''' to be present or be represented by another member.<br />
Else the GA has to be rescheduled. Thus we urge you to mark the date in your calendar and be present. This is important for us and for you!<br />
<br />
'''B)''' If you cannot attend the assembly personally, you're allowed and even encouraged to have yourself represented by an adult person of your choice. We will accept either pgp-signed emails or analogue signatures as prove of this delegation on that same day. Note that at the GA you are only allowed to represent one other person.<br />
<br />
=== Administrative Council ===<br />
'''C)''' You're also encouraged to stand for elections. Note that if you want to stand for elections to the positions of Secretary-General or Secretary-Deputy, you need to apply twice (once for the council, once for the position of Secretary)<br />
<br />
;How to apply for either election: At least 24 hours prior to the GA, i.e. latest at 17:59 on March 16th 2011, you need to send a PRIVATE email to the current council at office_AT_hackerspace_DOT_lu<br />
<br />
Also remember that we decided on the 2010 GA that every applicant to the position of Secretary should present his ideas and goals for the forthcoming legislative period (year). [A 5 min lightning talk is totally ok]<br />
<br />
For simplicity's sake, we ask that even members of the current council submit their applications.<br />
<br />
=== Amendments to the statutes ===<br />
'''D)''' Amendments to the statutes must also be entered at least 24hours before the General Assembly takes place and equally be sent to office@hackerspace.lu<br />
<br />
The current version of our statutes can be found [[Media:Syn2cat-statuts_290311.pdf|here]].<br />
<br />
==== Suggested amendments ====<br />
Please sign your amendments.</div>Slopjong//wiki.syn2cat.lu/wiki/User:SlopjongUser:Slopjong2012-03-07T17:18:44Z<p>Slopjong: </p>
<hr />
<div>{{Person<br />
|Firstname=Slopjong<br />
|Surname=Slopjong<br />
|Website=slopjong.de<br />
|Email=slopjong@hackerspace.lu<br />
|Skills=JavaScript, PHP, AVR C, C++, Qt, Java, Bash, JavaFX, Eagle, Electronics, jQuery, Python, XUL, MathML, LaTeX, Turbo Pascal, Modelica, Delphi, HTML, CSS, Modula, Oberon, some Objective C, ... too many languages I've ever used<br />
|Member of=syn2cat<br />
}}<br />
= Skills =<br />
None. Just a bit of everything ...<br />
<br />
= Likes =<br />
<br />
* [http://www.youtube.com/watch?v=DURk7VQhW-k Typing a document in Windows Media Player]<br />
* [http://www.youtube.com/watch?v=O2rGTXHvPCQ Numb3rs' description of IRC]<br />
* [http://www.youtube.com/watch?v=xqQ6Z-HmAqY Fire! Fire! ]<br />
<br />
= Projects =<br />
<br />
The next section is my personal schedule. The actual projects are listed after it.<br />
<br />
== What should I do when I'm in the space? ==<br />
<br />
* Continue to work on the pdf tools<br />
* Port algotunes to C++, python's datatypes are too big (only 16 bit required)<br />
* Design and build a couple of atmel programmers<br />
* Design and build the syndiwall LED matrix<br />
* Design and build the Tetris LED wall<br />
* Finish the handout for the famous etching and soldering workshop<br />
* Create a screencast for the famous etching and soldering workshop<br />
* Create linux packages / ports<br />
* Create gimmicks for the haxogreen page<br />
* Check the [http://sourceforge.net/projects/wall-changer/files/2.1/Gnome%202%20Version/wallch_2.1.tar.gz/download wallch] code and study how dbus works and how he's connecting to the internet<br />
* Have a look at haskell. Check [http://haskell.org/ this], [http://www.haskell.org/haskellwiki/FAQ#Is_Haskell_hard_to_learn.3F this], [http://eclipsefp.github.com/ this] and [http://haskell.org/haskellwiki/Editors this].<br />
* Write the Blinkentree editor and link it [https://en.wikipedia.org/wiki/Wiring_%28development_platform%29 here]<br />
* Have a look at [http://www.thegamecreators.com/?m=view_product&id=2030&page=index DarkBasic]<br />
* Have a look at [https://vaadin.com/home Vaadin]<br />
* Have a look at [http://www.codesend.com/view/0dab2aa2287f3697aebac2ebe6faf81c/ Admin Panel Bulucu]<br />
<br />
== The most active ==<br />
<br />
* Erviz<br />
<br />
== Running and updating ==<br />
<br />
* [https://source.hacker.lu/projects/syn2stock syn2stock] (not very active)<br />
* [https://source.hacker.lu/projects/-2 Repage]<br />
* [https://source.hacker.lu/projects/cu-rs232 USB-UART Converter]<br />
* [https://source.hacker.lu/projects/-4 Synoice]<br />
* Cutie (a graphical client for UDDIv3-compliant web service registries)<br />
<br />
== Almost started ==<br />
<br />
<br />
== Not yet started ==<br />
<br />
* [https://source.hacker.lu/projects/-1 SiMStrix]<br />
* [https://source.hacker.lu/projects/-3 Megabit Meter]<br />
* [https://source.hacker.lu/projects/-5 µTerminal]<br />
* [https://source.hacker.lu/projects/-6 QR Decoder]<br />
* [https://source.hacker.lu/projects/seemon Seemon]<br />
<br />
I also want to build this [http://www.youtube.com/watch?v=HGbbag9dklU&feature=player_embedded skateboard]. <br />
<br />
Some questions to be answered before the project starts:<br />
<br />
* Costs: ~300€ <br />
* When is this project considered as successful? What if the board has stabilization problems which make the board ridable too hard? <br />
* What if some parts must be replaced to get rid of the stabilization problems? Who pays this? <br />
* Who can donate stuff .... or who knows somebody (who knows somebody ...) who could donate what we need? <br />
* Who wants to contribute? syn2stock has high priorities so the kickoff meeting will be in May/June<br />
<br />
== Concluded ==<br />
<br />
* [https://source.hacker.lu/projects/blinkentree Blinkentree project page], [[Blinkentree|Blinkentree end user page]]<br />
<br />
= Workshops =<br />
<br />
I held:<br />
<br />
* 2011 Feb 19th [[The famous Etching and Soldering Workshop]]<br />
* 2011 May 21st [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 6th [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 26-28th [[The famous Etching and Soldering Workshop]] at the [[Large_Hacker_Convention_II]]<br />
* 2011 November 26th Toolset workshop (about redmine & git)</div>Slopjong//wiki.syn2cat.lu/wiki/User:SlopjongUser:Slopjong2012-03-07T17:17:23Z<p>Slopjong: </p>
<hr />
<div>{{Person<br />
|Firstname=Slopjong<br />
|Surname=Slopjong<br />
|Website=slopjong.de<br />
|Email=slopjong@hackerspace.lu<br />
|Skills=JavaScript, PHP, AVR C, C++, Qt, Java, Bash, JavaFX, Eagle, Electronics, jQuery, Python, XUL, MathML, LaTeX, Turbo Pascal, Delphi, HTML, CSS, Modula, Oberon, some Objective C, ... too many languages I've ever used<br />
|Member of=syn2cat<br />
}}<br />
= Skills =<br />
None. Just a bit of everything ...<br />
<br />
= Likes =<br />
<br />
* [http://www.youtube.com/watch?v=DURk7VQhW-k Typing a document in Windows Media Player]<br />
* [http://www.youtube.com/watch?v=O2rGTXHvPCQ Numb3rs' description of IRC]<br />
* [http://www.youtube.com/watch?v=xqQ6Z-HmAqY Fire! Fire! ]<br />
<br />
= Projects =<br />
<br />
The next section is my personal schedule. The actual projects are listed after it.<br />
<br />
== What should I do when I'm in the space? ==<br />
<br />
* Continue to work on the pdf tools<br />
* Port algotunes to C++, python's datatypes are too big (only 16 bit required)<br />
* Design and build a couple of atmel programmers<br />
* Design and build the syndiwall LED matrix<br />
* Design and build the Tetris LED wall<br />
* Finish the handout for the famous etching and soldering workshop<br />
* Create a screencast for the famous etching and soldering workshop<br />
* Create linux packages / ports<br />
* Create gimmicks for the haxogreen page<br />
* Check the [http://sourceforge.net/projects/wall-changer/files/2.1/Gnome%202%20Version/wallch_2.1.tar.gz/download wallch] code and study how dbus works and how he's connecting to the internet<br />
* Have a look at haskell. Check [http://haskell.org/ this], [http://www.haskell.org/haskellwiki/FAQ#Is_Haskell_hard_to_learn.3F this], [http://eclipsefp.github.com/ this] and [http://haskell.org/haskellwiki/Editors this].<br />
* Write the Blinkentree editor and link it [https://en.wikipedia.org/wiki/Wiring_%28development_platform%29 here]<br />
* Have a look at [http://www.thegamecreators.com/?m=view_product&id=2030&page=index DarkBasic]<br />
* Have a look at [https://vaadin.com/home Vaadin]<br />
* Have a look at [http://www.codesend.com/view/0dab2aa2287f3697aebac2ebe6faf81c/ Admin Panel Bulucu]<br />
<br />
== The most active ==<br />
<br />
* Erviz<br />
<br />
== Running and updating ==<br />
<br />
* [https://source.hacker.lu/projects/syn2stock syn2stock] (not very active)<br />
* [https://source.hacker.lu/projects/-2 Repage]<br />
* [https://source.hacker.lu/projects/cu-rs232 USB-UART Converter]<br />
* [https://source.hacker.lu/projects/-4 Synoice]<br />
* Cutie (a graphical client for UDDIv3-compliant web service registries)<br />
<br />
== Almost started ==<br />
<br />
<br />
== Not yet started ==<br />
<br />
* [https://source.hacker.lu/projects/-1 SiMStrix]<br />
* [https://source.hacker.lu/projects/-3 Megabit Meter]<br />
* [https://source.hacker.lu/projects/-5 µTerminal]<br />
* [https://source.hacker.lu/projects/-6 QR Decoder]<br />
* [https://source.hacker.lu/projects/seemon Seemon]<br />
<br />
I also want to build this [http://www.youtube.com/watch?v=HGbbag9dklU&feature=player_embedded skateboard]. <br />
<br />
Some questions to be answered before the project starts:<br />
<br />
* Costs: ~300€ <br />
* When is this project considered as successful? What if the board has stabilization problems which make the board ridable too hard? <br />
* What if some parts must be replaced to get rid of the stabilization problems? Who pays this? <br />
* Who can donate stuff .... or who knows somebody (who knows somebody ...) who could donate what we need? <br />
* Who wants to contribute? syn2stock has high priorities so the kickoff meeting will be in May/June<br />
<br />
== Concluded ==<br />
<br />
* [https://source.hacker.lu/projects/blinkentree Blinkentree project page], [[Blinkentree|Blinkentree end user page]]<br />
<br />
= Workshops =<br />
<br />
I held:<br />
<br />
* 2011 Feb 19th [[The famous Etching and Soldering Workshop]]<br />
* 2011 May 21st [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 6th [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 26-28th [[The famous Etching and Soldering Workshop]] at the [[Large_Hacker_Convention_II]]<br />
* 2011 November 26th Toolset workshop (about redmine & git)</div>Slopjong//wiki.syn2cat.lu/wiki/User:SlopjongUser:Slopjong2012-03-07T17:16:31Z<p>Slopjong: </p>
<hr />
<div>{{Person<br />
|Firstname=Slopjong<br />
|Surname=Slopjong<br />
|Website=slopjong.de<br />
|Email=slopjong@hackerspace.lu<br />
|Skills=JavaScript, PHP, AVR C, C++, Qt, Java, JavaFX, Eagle, Electronics, jQuery, Python, XUL, MathML, LaTeX, Turbo Pascal, Delphi, HTML, CSS, Modula, Oberon, some Objective C, ... too many languages I've ever used<br />
|Member of=syn2cat<br />
}}<br />
= Skills =<br />
None. Just a bit of everything ...<br />
<br />
= Likes =<br />
<br />
* [http://www.youtube.com/watch?v=DURk7VQhW-k Typing a document in Windows Media Player]<br />
* [http://www.youtube.com/watch?v=O2rGTXHvPCQ Numb3rs' description of IRC]<br />
* [http://www.youtube.com/watch?v=xqQ6Z-HmAqY Fire! Fire! ]<br />
<br />
= Projects =<br />
<br />
The next section is my personal schedule. The actual projects are listed after it.<br />
<br />
== What should I do when I'm in the space? ==<br />
<br />
* Continue to work on the pdf tools<br />
* Port algotunes to C++, python's datatypes are too big (only 16 bit required)<br />
* Design and build a couple of atmel programmers<br />
* Design and build the syndiwall LED matrix<br />
* Design and build the Tetris LED wall<br />
* Finish the handout for the famous etching and soldering workshop<br />
* Create a screencast for the famous etching and soldering workshop<br />
* Create linux packages / ports<br />
* Create gimmicks for the haxogreen page<br />
* Check the [http://sourceforge.net/projects/wall-changer/files/2.1/Gnome%202%20Version/wallch_2.1.tar.gz/download wallch] code and study how dbus works and how he's connecting to the internet<br />
* Have a look at haskell. Check [http://haskell.org/ this], [http://www.haskell.org/haskellwiki/FAQ#Is_Haskell_hard_to_learn.3F this], [http://eclipsefp.github.com/ this] and [http://haskell.org/haskellwiki/Editors this].<br />
* Write the Blinkentree editor and link it [https://en.wikipedia.org/wiki/Wiring_%28development_platform%29 here]<br />
* Have a look at [http://www.thegamecreators.com/?m=view_product&id=2030&page=index DarkBasic]<br />
* Have a look at [https://vaadin.com/home Vaadin]<br />
* Have a look at [http://www.codesend.com/view/0dab2aa2287f3697aebac2ebe6faf81c/ Admin Panel Bulucu]<br />
<br />
== The most active ==<br />
<br />
* Erviz<br />
<br />
== Running and updating ==<br />
<br />
* [https://source.hacker.lu/projects/syn2stock syn2stock] (not very active)<br />
* [https://source.hacker.lu/projects/-2 Repage]<br />
* [https://source.hacker.lu/projects/cu-rs232 USB-UART Converter]<br />
* [https://source.hacker.lu/projects/-4 Synoice]<br />
* Cutie (a graphical client for UDDIv3-compliant web service registries)<br />
<br />
== Almost started ==<br />
<br />
<br />
== Not yet started ==<br />
<br />
* [https://source.hacker.lu/projects/-1 SiMStrix]<br />
* [https://source.hacker.lu/projects/-3 Megabit Meter]<br />
* [https://source.hacker.lu/projects/-5 µTerminal]<br />
* [https://source.hacker.lu/projects/-6 QR Decoder]<br />
* [https://source.hacker.lu/projects/seemon Seemon]<br />
<br />
I also want to build this [http://www.youtube.com/watch?v=HGbbag9dklU&feature=player_embedded skateboard]. <br />
<br />
Some questions to be answered before the project starts:<br />
<br />
* Costs: ~300€ <br />
* When is this project considered as successful? What if the board has stabilization problems which make the board ridable too hard? <br />
* What if some parts must be replaced to get rid of the stabilization problems? Who pays this? <br />
* Who can donate stuff .... or who knows somebody (who knows somebody ...) who could donate what we need? <br />
* Who wants to contribute? syn2stock has high priorities so the kickoff meeting will be in May/June<br />
<br />
== Concluded ==<br />
<br />
* [https://source.hacker.lu/projects/blinkentree Blinkentree project page], [[Blinkentree|Blinkentree end user page]]<br />
<br />
= Workshops =<br />
<br />
I held:<br />
<br />
* 2011 Feb 19th [[The famous Etching and Soldering Workshop]]<br />
* 2011 May 21st [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 6th [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 26-28th [[The famous Etching and Soldering Workshop]] at the [[Large_Hacker_Convention_II]]<br />
* 2011 November 26th Toolset workshop (about redmine & git)</div>Slopjong//wiki.syn2cat.lu/wiki/Atari_ST_Knowhow_Workshop_4Atari ST Knowhow Workshop 42012-03-02T19:17:50Z<p>Slopjong: Edited automatically from page Atari ST Knowhow Workshop 4.</p>
<hr />
<div>{{Event<br />
|attendees=ST Knowhow Workshop 4 (User:ST Knowhow Workshop 4 (User:ST Knowhow Workshop 4 (User:ST Knowhow Workshop 4 (User:Sid)))), {{#username:}}<br />
|eventtype=Workshop<br />
|subtitle=assembler and hardware<br />
|description=Getting into the detail to make the hardware do what you want<br />
|contact=Gunstick,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2012/03/10 15:00<br />
|till=2012/03/10 18:00<br />
|location=Hackerspace, Strassen<br />
|logo=Atari_1040STf.jpg<br />
|highres=Atari_1040STf.jpg<br />
|announce=<br />
|cost=0 EUR<br />
|url=http://wiki.hackerspace.lu/wiki/AtariSTknowhow<br />
|u19=<br />
|keywords=atari st demo oldschool programming<br />
}}<br />
Have your emulator with assembler setup ready!<br />
<br />
Howto: download hatari, download TOS, download turboass and devpac<br />
Copy programming examples of workshop2 (lusitania) and workshop3 (git)<br />
<br />
* programming the 68000 in assembler (using turboass or devpac)<br />
** instructions<br />
** the ULM intro code to get quickly started<br />
* specificity of the Atari ST hardware (workshop 1, from the programmer's view)<br />
** where's my screen memory<br />
** memory mapped hardware<br />
* smooth scrolling howto (recall workshop 2?)<br />
** word and byte scrollers<br />
** bit scroller<br />
** be creative<br />
* color cycling effects (workshop 2 again)<br />
** need some drawing skills<br />
** more than 16 colors<br />
* tricking the ST hardware in other ways (as seen in workshop 3)<br />
** the mystery of digital sound output<br />
** other trickery by writing directly to hardware</div>Slopjong//wiki.syn2cat.lu/wiki/Atari_ST_Knowhow_Workshop_4Atari ST Knowhow Workshop 42012-03-02T19:15:20Z<p>Slopjong: Edited automatically from page Atari ST Knowhow Workshop 4.</p>
<hr />
<div>{{Event<br />
|attendees=ST Knowhow Workshop 4 (User:ST Knowhow Workshop 4 (User:ST Knowhow Workshop 4 (User:Sid))), {{#username:}}<br />
|eventtype=Workshop<br />
|subtitle=assembler and hardware<br />
|description=Getting into the detail to make the hardware do what you want<br />
|contact=Gunstick,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2012/03/10 15:00<br />
|till=2012/03/10 18:00<br />
|location=Hackerspace, Strassen<br />
|logo=Atari_1040STf.jpg<br />
|highres=Atari_1040STf.jpg<br />
|announce=<br />
|cost=0 EUR<br />
|url=http://wiki.hackerspace.lu/wiki/AtariSTknowhow<br />
|u19=<br />
|keywords=atari st demo oldschool programming<br />
}}<br />
Have your emulator with assembler setup ready!<br />
<br />
Howto: download hatari, download TOS, download turboass and devpac<br />
Copy programming examples of workshop2 (lusitania) and workshop3 (git)<br />
<br />
* programming the 68000 in assembler (using turboass or devpac)<br />
** instructions<br />
** the ULM intro code to get quickly started<br />
* specificity of the Atari ST hardware (workshop 1, from the programmer's view)<br />
** where's my screen memory<br />
** memory mapped hardware<br />
* smooth scrolling howto (recall workshop 2?)<br />
** word and byte scrollers<br />
** bit scroller<br />
** be creative<br />
* color cycling effects (workshop 2 again)<br />
** need some drawing skills<br />
** more than 16 colors<br />
* tricking the ST hardware in other ways (as seen in workshop 3)<br />
** the mystery of digital sound output<br />
** other trickery by writing directly to hardware</div>Slopjong//wiki.syn2cat.lu/wiki/Atari_ST_Knowhow_Workshop_4Atari ST Knowhow Workshop 42012-03-02T19:14:41Z<p>Slopjong: Edited automatically from page Atari ST Knowhow Workshop 4.</p>
<hr />
<div>{{Event<br />
|attendees=ST Knowhow Workshop 4 (User:ST Knowhow Workshop 4 (User:Sid)), {{#username:}}<br />
|eventtype=Workshop<br />
|subtitle=assembler and hardware<br />
|description=Getting into the detail to make the hardware do what you want<br />
|contact=Gunstick,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2012/03/10 15:00<br />
|till=2012/03/10 18:00<br />
|location=Hackerspace, Strassen<br />
|logo=Atari_1040STf.jpg<br />
|highres=Atari_1040STf.jpg<br />
|announce=<br />
|cost=0 EUR<br />
|url=http://wiki.hackerspace.lu/wiki/AtariSTknowhow<br />
|u19=<br />
|keywords=atari st demo oldschool programming<br />
}}<br />
Have your emulator with assembler setup ready!<br />
<br />
Howto: download hatari, download TOS, download turboass and devpac<br />
Copy programming examples of workshop2 (lusitania) and workshop3 (git)<br />
<br />
* programming the 68000 in assembler (using turboass or devpac)<br />
** instructions<br />
** the ULM intro code to get quickly started<br />
* specificity of the Atari ST hardware (workshop 1, from the programmer's view)<br />
** where's my screen memory<br />
** memory mapped hardware<br />
* smooth scrolling howto (recall workshop 2?)<br />
** word and byte scrollers<br />
** bit scroller<br />
** be creative<br />
* color cycling effects (workshop 2 again)<br />
** need some drawing skills<br />
** more than 16 colors<br />
* tricking the ST hardware in other ways (as seen in workshop 3)<br />
** the mystery of digital sound output<br />
** other trickery by writing directly to hardware</div>Slopjong//wiki.syn2cat.lu/wiki/Atari_ST_Knowhow_Workshop_1Atari ST Knowhow Workshop 12012-01-05T22:10:09Z<p>Slopjong: </p>
<hr />
<div>{{Event<br />
|attendees=Gunstick, Kwisatz, Sid, The metalgamer, Prometheus, Muling, Slopjong<br />
|eventtype=Workshop<br />
|subtitle=Atari ST knowhow introduction<br />
|description=History of the Atari ST and it's programming scene.<br />
<br><br />
This is part 1 of a series of workshops<br />
<br><br />
Language: luxembourgish<br />
|contact=Gunstick,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2012/01/28 15:00<br />
|till=2012/01/28 18:00<br />
|location=Hackerspace, Strassen<br />
|logo=Atari_1040STf.jpg<br />
|highres=Atari_1040STf.jpg<br />
|announce=no<br />
|cost=0 EUR<br />
|url=http://wiki.hackerspace.lu/wiki/AtariSTknowhow<br />
|u19=no<br />
}}<br />
Prerequisites:<br />
Try to have a working ST environment (or plan some more time after the workshop to get it running).<br />
Note that using actual hardware may seem easiest but you will hit problems with desk space used and the (to be solved) lack of Internet connectivity.<br />
Emulators: Saint, Steem, hatari<br />
<br />
Talk:<br />
* Introduction to the Atari ST<br />
o History<br />
o presentation of the hardware<br />
o the OS and available software <br />
* evolution of software<br />
o games<br />
o cracks<br />
o demos <br />
Hands on:<br />
* start your ST (or get the emulator running)<br />
* use software<br />
* no Internet here. what to do?</div>Slopjong//wiki.syn2cat.lu/wiki/Atari_ST_Knowhow_Workshop_1Atari ST Knowhow Workshop 12012-01-05T22:09:03Z<p>Slopjong: </p>
<hr />
<div>{{Event<br />
|attendees=Gunstick, Kwisatz, Sid, The metalgamer, Prometheus, Muling, Slopjong, Slopjong<br />
|eventtype=Workshop<br />
|subtitle=Atari ST knowhow introduction<br />
|description=History of the Atari ST and it's programming scene.<br />
<br><br />
This is part 1 of a series of workshops<br />
<br><br />
Language: luxembourgish<br />
|contact=Gunstick,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2012/01/28 15:00<br />
|till=2012/01/28 18:00<br />
|location=Hackerspace, Strassen<br />
|logo=Atari_1040STf.jpg<br />
|highres=Atari_1040STf.jpg<br />
|announce=no<br />
|cost=0 EUR<br />
|url=http://wiki.hackerspace.lu/wiki/AtariSTknowhow<br />
|u19=no<br />
}}<br />
Prerequisites:<br />
Try to have a working ST environment (or plan some more time after the workshop to get it running).<br />
Note that using actual hardware may seem easiest but you will hit problems with desk space used and the (to be solved) lack of Internet connectivity.<br />
Emulators: Saint, Steem, hatari<br />
<br />
Talk:<br />
* Introduction to the Atari ST<br />
o History<br />
o presentation of the hardware<br />
o the OS and available software <br />
* evolution of software<br />
o games<br />
o cracks<br />
o demos <br />
Hands on:<br />
* start your ST (or get the emulator running)<br />
* use software<br />
* no Internet here. what to do?</div>Slopjong//wiki.syn2cat.lu/wiki/Atari_ST_Knowhow_Workshop_1Atari ST Knowhow Workshop 12012-01-05T22:08:53Z<p>Slopjong: </p>
<hr />
<div>{{Event<br />
|attendees=Gunstick, Kwisatz, Sid, The metalgamer, Prometheus, Muling, Slopjong<br />
|eventtype=Workshop<br />
|subtitle=Atari ST knowhow introduction<br />
|description=History of the Atari ST and it's programming scene.<br />
<br><br />
This is part 1 of a series of workshops<br />
<br><br />
Language: luxembourgish<br />
|contact=Gunstick,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2012/01/28 15:00<br />
|till=2012/01/28 18:00<br />
|location=Hackerspace, Strassen<br />
|logo=Atari_1040STf.jpg<br />
|highres=Atari_1040STf.jpg<br />
|announce=no<br />
|cost=0 EUR<br />
|url=http://wiki.hackerspace.lu/wiki/AtariSTknowhow<br />
|u19=no<br />
}}<br />
Prerequisites:<br />
Try to have a working ST environment (or plan some more time after the workshop to get it running).<br />
Note that using actual hardware may seem easiest but you will hit problems with desk space used and the (to be solved) lack of Internet connectivity.<br />
Emulators: Saint, Steem, hatari<br />
<br />
Talk:<br />
* Introduction to the Atari ST<br />
o History<br />
o presentation of the hardware<br />
o the OS and available software <br />
* evolution of software<br />
o games<br />
o cracks<br />
o demos <br />
Hands on:<br />
* start your ST (or get the emulator running)<br />
* use software<br />
* no Internet here. what to do?</div>Slopjong//wiki.syn2cat.lu/wiki/User:SlopjongUser:Slopjong2011-12-29T00:15:07Z<p>Slopjong: </p>
<hr />
<div>{{Person<br />
|Firstname=Slopjong<br />
|Surname=Slopjong<br />
|Website=slopjong.de<br />
|Email=slopjong@hackerspace.lu<br />
|Skills=javascript, php, c, java, javafx, eagle, electronics, jquery, python<br />
|Member of=syn2cat<br />
}}<br />
= Skills =<br />
None. Just a bit of everything ...<br />
<br />
= Likes =<br />
<br />
* [http://www.youtube.com/watch?v=DURk7VQhW-k Typing a document in Windows Media Player]<br />
* [http://www.youtube.com/watch?v=O2rGTXHvPCQ Numb3rs' description of IRC]<br />
* [http://www.youtube.com/watch?v=xqQ6Z-HmAqY Fire! Fire! ]<br />
<br />
= Projects =<br />
<br />
The next section is my personal schedule. The actual projects are listed after it.<br />
<br />
== What should I do when I'm in the space? ==<br />
<br />
* Continue to work on the pdf tools<br />
* Port algotunes to C++, python's datatypes are too big (only 16 bit required)<br />
* Design and build a couple of atmel programmers<br />
* Design and build the syndiwall LED matrix<br />
* Design and build the Tetris LED wall<br />
* Finish the handout for the famous etching and soldering workshop<br />
* Create a screencast for the famous etching and soldering workshop<br />
* Create linux packages / ports<br />
* Create gimmicks for the haxogreen page<br />
* Check the [http://sourceforge.net/projects/wall-changer/files/2.1/Gnome%202%20Version/wallch_2.1.tar.gz/download wallch] code and study how dbus works and how he's connecting to the internet<br />
* Have a look at haskell. Check [http://haskell.org/ this], [http://www.haskell.org/haskellwiki/FAQ#Is_Haskell_hard_to_learn.3F this], [http://eclipsefp.github.com/ this] and [http://haskell.org/haskellwiki/Editors this].<br />
* Write the Blinkentree editor and link it [https://en.wikipedia.org/wiki/Wiring_%28development_platform%29 here]<br />
* Have a look at [http://www.thegamecreators.com/?m=view_product&id=2030&page=index DarkBasic]<br />
* Have a look at [https://vaadin.com/home Vaadin]<br />
* Have a look at [http://www.codesend.com/view/0dab2aa2287f3697aebac2ebe6faf81c/ Admin Panel Bulucu]<br />
<br />
== The most active ==<br />
<br />
* Erviz<br />
<br />
== Running and updating ==<br />
<br />
* [https://source.hacker.lu/projects/syn2stock syn2stock] (not very active)<br />
* [https://source.hacker.lu/projects/-2 Repage]<br />
* [https://source.hacker.lu/projects/cu-rs232 USB-UART Converter]<br />
* [https://source.hacker.lu/projects/-4 Synoice]<br />
* Cutie (a graphical client for UDDIv3-compliant web service registries)<br />
<br />
== Almost started ==<br />
<br />
<br />
== Not yet started ==<br />
<br />
* [https://source.hacker.lu/projects/-1 SiMStrix]<br />
* [https://source.hacker.lu/projects/-3 Megabit Meter]<br />
* [https://source.hacker.lu/projects/-5 µTerminal]<br />
* [https://source.hacker.lu/projects/-6 QR Decoder]<br />
* [https://source.hacker.lu/projects/seemon Seemon]<br />
<br />
I also want to build this [http://www.youtube.com/watch?v=HGbbag9dklU&feature=player_embedded skateboard]. <br />
<br />
Some questions to be answered before the project starts:<br />
<br />
* Costs: ~300€ <br />
* When is this project considered as successful? What if the board has stabilization problems which make the board ridable too hard? <br />
* What if some parts must be replaced to get rid of the stabilization problems? Who pays this? <br />
* Who can donate stuff .... or who knows somebody (who knows somebody ...) who could donate what we need? <br />
* Who wants to contribute? syn2stock has high priorities so the kickoff meeting will be in May/June<br />
<br />
== Concluded ==<br />
<br />
* [https://source.hacker.lu/projects/blinkentree Blinkentree project page], [[Blinkentree|Blinkentree end user page]]<br />
<br />
= Workshops =<br />
<br />
I held:<br />
<br />
* 2011 Feb 19th [[The famous Etching and Soldering Workshop]]<br />
* 2011 May 21st [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 6th [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 26-28th [[The famous Etching and Soldering Workshop]] at the [[Large_Hacker_Convention_II]]<br />
* 2011 November 26th Toolset workshop (about redmine & git)</div>Slopjong//wiki.syn2cat.lu/wiki/User:SlopjongUser:Slopjong2011-12-26T23:13:41Z<p>Slopjong: </p>
<hr />
<div>{{Person<br />
|Firstname=Slopjong<br />
|Surname=Slopjong<br />
|Website=slopjong.de<br />
|Email=slopjong@hackerspace.lu<br />
|Skills=javascript, php, c, java, javafx, eagle, electronics, jquery, python<br />
|Member of=syn2cat<br />
}}<br />
= Skills =<br />
None. Just a bit of everything ...<br />
<br />
= Likes =<br />
<br />
* [http://www.youtube.com/watch?v=DURk7VQhW-k Typing a document in Windows Media Player]<br />
* [http://www.youtube.com/watch?v=O2rGTXHvPCQ Numb3rs' description of IRC]<br />
* [http://www.youtube.com/watch?v=xqQ6Z-HmAqY Fire! Fire! ]<br />
<br />
= Projects =<br />
<br />
The next section is my personal schedule. The actual projects are listed after it.<br />
<br />
== What should I do when I'm in the space? ==<br />
<br />
* Continue to work on the pdf tools<br />
* Port algotunes to C++, python's datatypes are too big (only 16 bit required)<br />
* Design and build a couple of atmel programmers<br />
* Design and build the syndiwall LED matrix<br />
* Design and build the Tetris LED wall<br />
* Finish the handout for the famous etching and soldering workshop<br />
* Create a screencast for the famous etching and soldering workshop<br />
* Create linux packages / ports<br />
* Create gimmicks for the haxogreen page<br />
* Check the [http://sourceforge.net/projects/wall-changer/files/2.1/Gnome%202%20Version/wallch_2.1.tar.gz/download wallch] code and study how dbus works and how he's connecting to the internet<br />
* Have a look at haskell. Check [http://haskell.org/ this], [http://www.haskell.org/haskellwiki/FAQ#Is_Haskell_hard_to_learn.3F this], [http://eclipsefp.github.com/ this] and [http://haskell.org/haskellwiki/Editors this].<br />
* Write the Blinkentree editor and link it [https://en.wikipedia.org/wiki/Wiring_%28development_platform%29 here]<br />
* Have a look at [http://www.thegamecreators.com/?m=view_product&id=2030&page=index DarkBasic]<br />
* Have a look at [https://vaadin.com/home Vaadin]<br />
<br />
== The most active ==<br />
<br />
* Erviz<br />
<br />
== Running and updating ==<br />
<br />
* [https://source.hacker.lu/projects/syn2stock syn2stock] (not very active)<br />
* [https://source.hacker.lu/projects/-2 Repage]<br />
* [https://source.hacker.lu/projects/cu-rs232 USB-UART Converter]<br />
* [https://source.hacker.lu/projects/-4 Synoice]<br />
* Cutie (a graphical client for UDDIv3-compliant web service registries)<br />
<br />
== Almost started ==<br />
<br />
<br />
== Not yet started ==<br />
<br />
* [https://source.hacker.lu/projects/-1 SiMStrix]<br />
* [https://source.hacker.lu/projects/-3 Megabit Meter]<br />
* [https://source.hacker.lu/projects/-5 µTerminal]<br />
* [https://source.hacker.lu/projects/-6 QR Decoder]<br />
* [https://source.hacker.lu/projects/seemon Seemon]<br />
<br />
I also want to build this [http://www.youtube.com/watch?v=HGbbag9dklU&feature=player_embedded skateboard]. <br />
<br />
Some questions to be answered before the project starts:<br />
<br />
* Costs: ~300€ <br />
* When is this project considered as successful? What if the board has stabilization problems which make the board ridable too hard? <br />
* What if some parts must be replaced to get rid of the stabilization problems? Who pays this? <br />
* Who can donate stuff .... or who knows somebody (who knows somebody ...) who could donate what we need? <br />
* Who wants to contribute? syn2stock has high priorities so the kickoff meeting will be in May/June<br />
<br />
== Concluded ==<br />
<br />
* [https://source.hacker.lu/projects/blinkentree Blinkentree project page], [[Blinkentree|Blinkentree end user page]]<br />
<br />
= Workshops =<br />
<br />
I held:<br />
<br />
* 2011 Feb 19th [[The famous Etching and Soldering Workshop]]<br />
* 2011 May 21st [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 6th [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 26-28th [[The famous Etching and Soldering Workshop]] at the [[Large_Hacker_Convention_II]]<br />
* 2011 November 26th Toolset workshop (about redmine & git)</div>Slopjong//wiki.syn2cat.lu/wiki/User:SlopjongUser:Slopjong2011-12-26T21:25:52Z<p>Slopjong: </p>
<hr />
<div>{{Person<br />
|Firstname=Slopjong<br />
|Surname=Slopjong<br />
|Website=slopjong.de<br />
|Email=slopjong@hackerspace.lu<br />
|Skills=javascript, php, c, java, javafx, eagle, electronics, jquery, python<br />
|Member of=syn2cat<br />
}}<br />
= Skills =<br />
None. Just a bit of everything ...<br />
<br />
= Likes =<br />
<br />
* [http://www.youtube.com/watch?v=DURk7VQhW-k Typing a document in Windows Media Player]<br />
* [http://www.youtube.com/watch?v=O2rGTXHvPCQ Numb3rs' description of IRC]<br />
* [http://www.youtube.com/watch?v=xqQ6Z-HmAqY Fire! Fire! ]<br />
<br />
= Projects =<br />
<br />
The next section is my personal schedule. The actual projects are listed after it.<br />
<br />
== What should I do when I'm in the space? ==<br />
<br />
* Continue to work on the pdf tools<br />
* Port algotunes to C++, python's datatypes are too big (only 16 bit required)<br />
* Design and build a couple of atmel programmers<br />
* Design and build the syndiwall LED matrix<br />
* Design and build the Tetris LED wall<br />
* Finish the handout for the famous etching and soldering workshop<br />
* Create a screencast for the famous etching and soldering workshop<br />
* Create linux packages / ports<br />
* Create gimmicks for the haxogreen page<br />
* Check the [http://sourceforge.net/projects/wall-changer/files/2.1/Gnome%202%20Version/wallch_2.1.tar.gz/download wallch] code and study how dbus works and how he's connecting to the internet<br />
* Have a look at haskell. Check [http://haskell.org/ this], [http://www.haskell.org/haskellwiki/FAQ#Is_Haskell_hard_to_learn.3F this], [http://eclipsefp.github.com/ this] and [http://haskell.org/haskellwiki/Editors this].<br />
* Write the Blinkentree editor and link it [https://en.wikipedia.org/wiki/Wiring_%28development_platform%29 here]<br />
* Have a look at [http://www.thegamecreators.com/?m=view_product&id=2030&page=index DarkBasic]<br />
<br />
== The most active ==<br />
<br />
* Erviz<br />
<br />
== Running and updating ==<br />
<br />
* [https://source.hacker.lu/projects/syn2stock syn2stock] (not very active)<br />
* [https://source.hacker.lu/projects/-2 Repage]<br />
* [https://source.hacker.lu/projects/cu-rs232 USB-UART Converter]<br />
* [https://source.hacker.lu/projects/-4 Synoice]<br />
* Cutie (a graphical client for UDDIv3-compliant web service registries)<br />
<br />
== Almost started ==<br />
<br />
<br />
== Not yet started ==<br />
<br />
* [https://source.hacker.lu/projects/-1 SiMStrix]<br />
* [https://source.hacker.lu/projects/-3 Megabit Meter]<br />
* [https://source.hacker.lu/projects/-5 µTerminal]<br />
* [https://source.hacker.lu/projects/-6 QR Decoder]<br />
* [https://source.hacker.lu/projects/seemon Seemon]<br />
<br />
I also want to build this [http://www.youtube.com/watch?v=HGbbag9dklU&feature=player_embedded skateboard]. <br />
<br />
Some questions to be answered before the project starts:<br />
<br />
* Costs: ~300€ <br />
* When is this project considered as successful? What if the board has stabilization problems which make the board ridable too hard? <br />
* What if some parts must be replaced to get rid of the stabilization problems? Who pays this? <br />
* Who can donate stuff .... or who knows somebody (who knows somebody ...) who could donate what we need? <br />
* Who wants to contribute? syn2stock has high priorities so the kickoff meeting will be in May/June<br />
<br />
== Concluded ==<br />
<br />
* [https://source.hacker.lu/projects/blinkentree Blinkentree project page], [[Blinkentree|Blinkentree end user page]]<br />
<br />
= Workshops =<br />
<br />
I held:<br />
<br />
* 2011 Feb 19th [[The famous Etching and Soldering Workshop]]<br />
* 2011 May 21st [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 6th [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 26-28th [[The famous Etching and Soldering Workshop]] at the [[Large_Hacker_Convention_II]]<br />
* 2011 November 26th Toolset workshop (about redmine & git)</div>Slopjong//wiki.syn2cat.lu/wiki/User:SlopjongUser:Slopjong2011-12-26T02:17:28Z<p>Slopjong: </p>
<hr />
<div>{{Person<br />
|Firstname=Slopjong<br />
|Surname=Slopjong<br />
|Website=slopjong.de<br />
|Email=slopjong@hackerspace.lu<br />
|Skills=javascript, php, c, java, javafx, eagle, electronics, jquery, python<br />
|Member of=syn2cat<br />
}}<br />
= Skills =<br />
None. Just a bit of everything ...<br />
<br />
= Likes =<br />
<br />
* [http://www.youtube.com/watch?v=DURk7VQhW-k Typing a document in Windows Media Player]<br />
* [http://www.youtube.com/watch?v=O2rGTXHvPCQ Numb3rs' description of IRC]<br />
* [http://www.youtube.com/watch?v=xqQ6Z-HmAqY Fire! Fire! ]<br />
<br />
= Projects =<br />
<br />
The next section is my personal schedule. The actual projects are listed after it.<br />
<br />
== What should I do when I'm in the space? ==<br />
<br />
* Continue to work on the pdf tools<br />
* Port algotunes to C++, python's datatypes are too big (only 16 bit required)<br />
* Design and build a couple of atmel programmers<br />
* Design and build the syndiwall LED matrix<br />
* Design and build the Tetris LED wall<br />
* Finish the handout for the famous etching and soldering workshop<br />
* Create a screencast for the famous etching and soldering workshop<br />
* Create linux packages / ports<br />
* Create gimmicks for the haxogreen page<br />
* Check the [http://sourceforge.net/projects/wall-changer/files/2.1/Gnome%202%20Version/wallch_2.1.tar.gz/download wallch] code and study how dbus works and how he's connecting to the internet<br />
* Have a look at haskell. Check [http://haskell.org/ this], [http://www.haskell.org/haskellwiki/FAQ#Is_Haskell_hard_to_learn.3F this], [http://eclipsefp.github.com/ this] and [http://haskell.org/haskellwiki/Editors this].<br />
* Write the Blinkentree editor and link it [https://en.wikipedia.org/wiki/Wiring_%28development_platform%29 here]<br />
* Have a look at [http://www.thegamecreators.com/?m=view_product&id=2030&page=index DarkBasic]<br />
<br />
== The most active ==<br />
<br />
* Erviz<br />
<br />
== Running and updating ==<br />
<br />
* [https://source.hacker.lu/projects/syn2stock syn2stock] (not very active)<br />
* [https://source.hacker.lu/projects/-2 Repage]<br />
* [https://source.hacker.lu/projects/cu-rs232 USB-UART Converter]<br />
* [https://source.hacker.lu/projects/-4 Synoice]<br />
* Cutie (a graphical client for UDDIv3-compliant web service registries)<br />
<br />
== Almost started ==<br />
<br />
<br />
== Not yet started ==<br />
<br />
* [https://source.hacker.lu/projects/-1 SiMStrix]<br />
* [https://source.hacker.lu/projects/-3 Megabit Meter]<br />
* [https://source.hacker.lu/projects/-5 µTerminal]<br />
* [https://source.hacker.lu/projects/-6 QR Decoder]<br />
* [https://source.hacker.lu/projects/seemon Seemon]<br />
<br />
I also want to build this [http://www.youtube.com/watch?v=HGbbag9dklU&feature=player_embedded skateboard]. <br />
<br />
Some questions to be answered before the project starts:<br />
<br />
* Costs: ~300€ <br />
* When is this project considered as successful? What if the board has stabilization problems which make the board ridable too hard? <br />
* What if some parts must be replaced to get rid of the stabilization problems? Who pays this? <br />
* Who can donate stuff .... or who knows somebody (who knows somebody ...) who could donate what we need? <br />
* Who wants to contribute? syn2stock has high priorities so the kickoff meeting will be in May/June<br />
<br />
== Concluded ==<br />
<br />
* [https://source.hacker.lu/projects/blinkentree Blinkentree project page], [[Blinkentree|Blinkentree end user page]]<br />
<br />
= Workshops =<br />
<br />
I held:<br />
<br />
* 2011 Feb 19th [[The famous Etching and Soldering Workshop]]<br />
* 2011 May 21st [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 6th [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 26-28th [[The famous Etching and Soldering Workshop]] at the [[Large_Hacker_Convention_II]]<br />
* 2011 December 26th Toolset workshop (about redmine & git)</div>Slopjong//wiki.syn2cat.lu/wiki/PeaceMissions_28C3PeaceMissions 28C32011-12-19T09:15:52Z<p>Slopjong: </p>
<hr />
<div>{{Event<br />
|attendees=Lala, NPU, Sid, Destructive, Muling<br />
|eventtype=Event<br />
|subtitle=Live link to 28C3 in Berlin: An experience like never seen before in Luxembourg.<br />
|description=The annual CCC congress will take place in Berlin as every year since 1984. And as every year there are some hackers who are not able to join their companions in Germany, but they will do from wherever they feel like home.<br />
|contact=prometheus<br />
|organizer=syn2cat, C3l,<br />
|recurring=no<br />
|from=2011/12/27 11:30<br />
|till=2011/12/30 18:45<br />
|location=Hackerspace, Strassen<br />
|logo=28C3_Logo.png<br />
|announce=yes<br />
|cost=0 EUR<br />
|url=http://events.ccc.de/<br />
|u19=no<br />
|keywords=ccc, c3l, Security, Berlin, Chaos, Communication, Congress<br />
}}<br />
== 28C3 - Behind the enemies lines ==<br />
<br />
== References ==<br />
<br />
''Chaos Computer Club''<br />
* [http://ccc.de/ Chaos Computer Club - Official Website]<br />
* [http://events.ccc.de/ Chaos Computer Club - Event Website]<br />
* [https://twitter.com/ccc Chaos Computer Club - Event Twitter Acc.] (getting live updates from CCC events)<br />
<br />
''28C3''<br />
* [http://events.ccc.de/congress/2011/Fahrplan/index.en.html 28C3 - Fahrplan] (Congress Schedule)<br />
* [http://events.ccc.de/congress/2011/wiki/Main_Page 28C3 - Wiki]<br />
* [https://twitter.com/ccc 28C3 on Twitter] (getting live updates)<br />
* [http://events.ccc.de/congress/2011/wiki/No_nerd_left_behind#Luxembourg No Nerd left behind]<br />
* [https://wiki.hackerspace.lu/wiki/File:28C3_Logo.png 28C3 Logo] (Large)</div>Slopjong//wiki.syn2cat.lu/wiki/Chr%C3%ABschtmaart_2011Chrëschtmaart 20112011-12-17T12:49:53Z<p>Slopjong: /* Who will participate (please put your name below) */</p>
<hr />
<div>{{Event<br />
|attendees=Slopjong, Gunstick, NPU, Sid, prometheus, Ithierry, Lala<br />
|eventtype=Fair<br />
|subtitle=syn2cat on the local Christmas market<br />
|contact=NPU<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2011/12/17 16:00<br />
|till=2011/12/17 20:00<br />
|location=Commune Strassen<br />
|logo=Gamecookies poster.png<br />
|highres=Gc highres.png<br />
|announce=no<br />
|cost=0 EUR<br />
|u19=no<br />
|keywords=Christmas, market, jingle bells<br />
}}<br />
And again we will have our booth on Strassen's Christmas Market.<br />
<br />
We'll sell all the good stuff we created before during the [[GameCookies|baking workshops]], AND of course the famous X-Mas [[Blinkentree|Blinkentrees]].<br />
<br />
== Checklist ==<br />
Things to think about for the XMas market :<br />
<br />
If you think you can fill-in an item or topic, please feel free to add yourself hereby :<br />
<br />
* Heater for the booth (I can bring mine from last year, but only 2KW [[User:Gunstick|Gunstick]])<br />
* Power Cords & multiple sockets <@hackerspace><br />
* Pins and nails<br />
* Powertape <@hackerspace><br />
* syn2cat banner<br />
* Induction plate (for heating the Glühmate)<br />
* small and big pot for the Mate<br />
* thermos cans to keep Mate hot.<br />
* Rum (for filling in the Glühmate)<br />
* a '''few''' gadgets from the hackerspace<br />
<br />
<br />
=== Items "for sale" ===<br />
<br />
* [[Blinkentree|Blinkentrees]]<br />
* [[GameCookies|Game Cookies]]<br />
* Glühmate<br />
* Coins for change + Cashier<br />
<br />
=== Who will participate (please put your name below) ===<br />
and if you are cool, you also put your name on the event's participation list.<br />
<br /><br /><br />
<br />
'''* Friday buildup (xxh00 - 16h00)''' <br />
: '''Cancelled by the commune due to weather condition'''<br />
<br /><br />
<br />
'''* Friday during X-mas market (16h00 - 20h00)''' <br />
: '''Cancelled by the commune due to weather condition'''<br />
<br /><br />
<br />
'''* Saturday buildup (xxh00 -16h00)'''<br />
: Sid<br />
<br /><br />
<br />
'''* Saturday during X-mas market (16h00 - 20h00)'''<br />
: Gunstick, Sid, NPU, prometheus, iThierry, slp. (with Verspeidung)<br />
<br /><br />
<br />
'''* Saturday breakdown (20h00 - open end)'''<br />
: Gunstick, Sid, NPU, prometheus, iThierry, Slpjng<br />
<br /><br />
<br />
<big>everybody should go to the booth, take a piece and put it into car(s). Then walk down to the space and fetch a piece from the car(s) and put it at it's right spot in the space.<br />
Then we start the [[Bootstrap_Meeting]]!</big></div>Slopjong//wiki.syn2cat.lu/wiki/User:SlopjongUser:Slopjong2011-12-06T01:19:01Z<p>Slopjong: /* What should I do when I'm in the space? */</p>
<hr />
<div>{{Person<br />
|Firstname=Slopjong<br />
|Surname=Slopjong<br />
|Website=slopjong.de<br />
|Email=slopjong@hackerspace.lu<br />
|Skills=javascript, php, c, java, javafx, eagle, electronics, jquery, python<br />
|Member of=syn2cat<br />
}}<br />
= Skills =<br />
None. Just a bit of everything ...<br />
<br />
= Likes =<br />
<br />
* [http://www.youtube.com/watch?v=DURk7VQhW-k Typing a document in Windows Media Player]<br />
* [http://www.youtube.com/watch?v=O2rGTXHvPCQ Numb3rs' description of IRC]<br />
* [http://www.youtube.com/watch?v=xqQ6Z-HmAqY Fire! Fire! ]<br />
<br />
= Projects =<br />
<br />
The next section is my personal schedule. The actual projects are listed after it.<br />
<br />
== What should I do when I'm in the space? ==<br />
<br />
* <s>Finish the blinkentrees</s><br />
* Continue to work on the pdf tools<br />
* Port algotunes to C++, python's datatypes are too big (only 16 bit required)<br />
* Design and build a couple of programmers<br />
* Design and build the syndiwall LED matrix<br />
* Design and build the Tetris LED wall<br />
* Finish the handout for the famous etching and soldering workshop<br />
* Create a screencast for the famous etching and soldering workshop<br />
* Create linux packages / ports<br />
* Create gimmicks for the haxogreen page<br />
* Check the [http://sourceforge.net/projects/wall-changer/files/2.1/Gnome%202%20Version/wallch_2.1.tar.gz/download wallch] code and study how dbus works and how he's connecting to the internet<br />
* Have a look at haskell. Check [http://haskell.org/ this], [http://www.haskell.org/haskellwiki/FAQ#Is_Haskell_hard_to_learn.3F this], [http://eclipsefp.github.com/ this] and [http://haskell.org/haskellwiki/Editors this].<br />
* Write the Blinkentree editor and link it [https://en.wikipedia.org/wiki/Wiring_%28development_platform%29 here]<br />
<br />
== The most active ==<br />
<br />
* Erviz<br />
<br />
== Running and updating ==<br />
<br />
* [https://source.hacker.lu/projects/syn2stock syn2stock] (not very active)<br />
* [https://source.hacker.lu/projects/-2 Repage]<br />
* [https://source.hacker.lu/projects/cu-rs232 USB-UART Converter]<br />
* [https://source.hacker.lu/projects/-4 Synoice]<br />
* Cutie (a graphical client for UDDIv3-compliant web service registries)<br />
<br />
== Almost started ==<br />
<br />
<br />
== Not yet started ==<br />
<br />
* [https://source.hacker.lu/projects/-1 SiMStrix]<br />
* [https://source.hacker.lu/projects/-3 Megabit Meter]<br />
* [https://source.hacker.lu/projects/-5 µTerminal]<br />
* [https://source.hacker.lu/projects/-6 QR Decoder]<br />
* [https://source.hacker.lu/projects/seemon Seemon]<br />
<br />
I also want to build this [http://www.youtube.com/watch?v=HGbbag9dklU&feature=player_embedded skateboard]. <br />
<br />
Some questions to be answered before the project starts:<br />
<br />
* Costs: ~300€ <br />
* When is this project considered as successful? What if the board has stabilization problems which make the board ridable too hard? <br />
* What if some parts must be replaced to get rid of the stabilization problems? Who pays this? <br />
* Who can donate stuff .... or who knows somebody (who knows somebody ...) who could donate what we need? <br />
* Who wants to contribute? syn2stock has high priorities so the kickoff meeting will be in May/June<br />
<br />
== Concluded ==<br />
<br />
* [https://source.hacker.lu/projects/blinkentree Blinkentree project page], [[Blinkentree|Blinkentree end user page]]<br />
<br />
= Workshops =<br />
<br />
I held:<br />
<br />
* 2011 Feb 19th [[The famous Etching and Soldering Workshop]]<br />
* 2011 May 21st [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 6th [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 26-28th [[The famous Etching and Soldering Workshop]] at the [[Large_Hacker_Convention_II]]<br />
* 2011 December 26th Toolset workshop (about redmine & git)</div>Slopjong//wiki.syn2cat.lu/wiki/User:SlopjongUser:Slopjong2011-12-04T12:12:13Z<p>Slopjong: </p>
<hr />
<div>{{Person<br />
|Firstname=Slopjong<br />
|Surname=Slopjong<br />
|Website=slopjong.de<br />
|Email=slopjong@hackerspace.lu<br />
|Skills=javascript, php, c, java, javafx, eagle, electronics, jquery, python<br />
|Member of=syn2cat<br />
}}<br />
= Skills =<br />
None. Just a bit of everything ...<br />
<br />
= Likes =<br />
<br />
* [http://www.youtube.com/watch?v=DURk7VQhW-k Typing a document in Windows Media Player]<br />
* [http://www.youtube.com/watch?v=O2rGTXHvPCQ Numb3rs' description of IRC]<br />
* [http://www.youtube.com/watch?v=xqQ6Z-HmAqY Fire! Fire! ]<br />
<br />
= Projects =<br />
<br />
The next section is my personal schedule. The actual projects are listed after it.<br />
<br />
== What should I do when I'm in the space? ==<br />
<br />
* <s>Finish the blinkentrees</s><br />
* Continue to work on the pdf tools<br />
* Port algotunes to C++, python's datatypes are too big (only 16 bit required)<br />
* Design and build a couple of programmers<br />
* Design and build the syndiwall LED matrix<br />
* Design and build the Tetris LED wall<br />
* Finish the handout for the famous etching and soldering workshop<br />
* Create a screencast for the famous etching and soldering workshop<br />
* Create linux packages / ports<br />
* Create gimmicks for the haxogreen page<br />
* Check the [http://sourceforge.net/projects/wall-changer/files/2.1/Gnome%202%20Version/wallch_2.1.tar.gz/download wallch] code and study how dbus works and how he's connecting to the internet<br />
* Have a look at haskell. Check [http://haskell.org/ this], [http://www.haskell.org/haskellwiki/FAQ#Is_Haskell_hard_to_learn.3F this], [http://eclipsefp.github.com/ this] and [http://haskell.org/haskellwiki/Editors this].<br />
<br />
== The most active ==<br />
<br />
* Erviz<br />
<br />
== Running and updating ==<br />
<br />
* [https://source.hacker.lu/projects/syn2stock syn2stock] (not very active)<br />
* [https://source.hacker.lu/projects/-2 Repage]<br />
* [https://source.hacker.lu/projects/cu-rs232 USB-UART Converter]<br />
* [https://source.hacker.lu/projects/-4 Synoice]<br />
* Cutie (a graphical client for UDDIv3-compliant web service registries)<br />
<br />
== Almost started ==<br />
<br />
<br />
== Not yet started ==<br />
<br />
* [https://source.hacker.lu/projects/-1 SiMStrix]<br />
* [https://source.hacker.lu/projects/-3 Megabit Meter]<br />
* [https://source.hacker.lu/projects/-5 µTerminal]<br />
* [https://source.hacker.lu/projects/-6 QR Decoder]<br />
* [https://source.hacker.lu/projects/seemon Seemon]<br />
<br />
I also want to build this [http://www.youtube.com/watch?v=HGbbag9dklU&feature=player_embedded skateboard]. <br />
<br />
Some questions to be answered before the project starts:<br />
<br />
* Costs: ~300€ <br />
* When is this project considered as successful? What if the board has stabilization problems which make the board ridable too hard? <br />
* What if some parts must be replaced to get rid of the stabilization problems? Who pays this? <br />
* Who can donate stuff .... or who knows somebody (who knows somebody ...) who could donate what we need? <br />
* Who wants to contribute? syn2stock has high priorities so the kickoff meeting will be in May/June<br />
<br />
== Concluded ==<br />
<br />
* [https://source.hacker.lu/projects/blinkentree Blinkentree project page], [[Blinkentree|Blinkentree end user page]]<br />
<br />
= Workshops =<br />
<br />
I held:<br />
<br />
* 2011 Feb 19th [[The famous Etching and Soldering Workshop]]<br />
* 2011 May 21st [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 6th [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 26-28th [[The famous Etching and Soldering Workshop]] at the [[Large_Hacker_Convention_II]]<br />
* 2011 December 26th Toolset workshop (about redmine & git)</div>Slopjong//wiki.syn2cat.lu/wiki/User:SlopjongUser:Slopjong2011-11-29T21:33:04Z<p>Slopjong: /* What should I do when I'm in the space? */</p>
<hr />
<div>{{Person<br />
|Firstname=Slopjong<br />
|Surname=Slopjong<br />
|Website=slopjong.de<br />
|Email=slopjong@hackerspace.lu<br />
|Skills=javascript, php, c, java, javafx, eagle, electronics, jquery, python<br />
|Member of=syn2cat<br />
}}<br />
= Skills =<br />
None. Just a bit of everything ...<br />
<br />
= Likes =<br />
<br />
* [http://www.youtube.com/watch?v=DURk7VQhW-k Typing a document in Windows Media Player]<br />
* [http://www.youtube.com/watch?v=O2rGTXHvPCQ Numb3rs' description of IRC]<br />
* [http://www.youtube.com/watch?v=xqQ6Z-HmAqY Fire! Fire! ]<br />
<br />
= Projects =<br />
<br />
The next section is my personal schedule. The actual projects are listed after it.<br />
<br />
== What should I do when I'm in the space? ==<br />
<br />
* <s>Finish the blinkentrees</s><br />
* Continue to work on the pdf tools<br />
* Port algotunes to C++, python's datatypes are too big (only 16 bit required)<br />
* Design and build a couple of programmers<br />
* Design and build the syndiwall LED matrix<br />
* Design and build the Tetris LED wall<br />
* Finish the handout for the famous etching and soldering workshop<br />
* Create a screencast for the famous etching and soldering workshop<br />
* Create linux packages / ports<br />
* Create gimmicks for the haxogreen page<br />
* Check the [http://sourceforge.net/projects/wall-changer/files/2.1/Gnome%202%20Version/wallch_2.1.tar.gz/download wallch] code and study how dbus works and how he's connecting to the internet<br />
* Have a look at haskell. Check [http://haskell.org/ this], [http://www.haskell.org/haskellwiki/FAQ#Is_Haskell_hard_to_learn.3F this], [http://eclipsefp.github.com/ this] and [http://haskell.org/haskellwiki/Editors this].<br />
<br />
== The most active ==<br />
<br />
* Erviz<br />
<br />
== Running and updating ==<br />
<br />
* [https://source.hacker.lu/projects/syn2stock syn2stock] (not very active)<br />
* [https://source.hacker.lu/projects/-2 Repage]<br />
* [https://source.hacker.lu/projects/cu-rs232 USB-UART Converter]<br />
* [https://source.hacker.lu/projects/-4 Synoice]<br />
* Cutie (a graphical client for UDDIv3-compliant web service registries)<br />
<br />
== Almost started ==<br />
<br />
<br />
== Not yet started ==<br />
<br />
* [https://source.hacker.lu/projects/-1 SiMStrix]<br />
* [https://source.hacker.lu/projects/-3 Megabit Meter]<br />
* [https://source.hacker.lu/projects/-5 µTerminal]<br />
* [https://source.hacker.lu/projects/-6 QR Decoder]<br />
* [https://source.hacker.lu/projects/seemon Seemon]<br />
<br />
I also want to build this [http://www.youtube.com/watch?v=HGbbag9dklU&feature=player_embedded skateboard]. <br />
<br />
Some questions to be answered before the project starts:<br />
<br />
* Costs: ~300€ <br />
* When is this project considered as successful? What if the board has stabilization problems which make the board ridable too hard? <br />
* What if some parts must be replaced to get rid of the stabilization problems? Who pays this? <br />
* Who can donate stuff .... or who knows somebody (who knows somebody ...) who could donate what we need? <br />
* Who wants to contribute? syn2stock has high priorities so the kickoff meeting will be in May/June<br />
<br />
== Concluded ==<br />
<br />
* [https://source.hacker.lu/projects/blinkentree Blinkentree project page], [[Blinkentree|Blinkentree end user page]]<br />
<br />
= Workshops =<br />
<br />
I held:<br />
<br />
* 2011 Feb 19th [[The famous Etching and Soldering Workshop]]<br />
* 2011 May 21st [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 6th [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 26-28th [[The famous Etching and Soldering Workshop]] at the [[Large_Hacker_Convention_II]]</div>Slopjong//wiki.syn2cat.lu/wiki/User:SlopjongUser:Slopjong2011-11-27T23:49:47Z<p>Slopjong: /* What should I do when I'm in the space? */</p>
<hr />
<div>{{Person<br />
|Firstname=Slopjong<br />
|Surname=Slopjong<br />
|Website=slopjong.de<br />
|Email=slopjong@hackerspace.lu<br />
|Skills=javascript, php, c, java, javafx, eagle, electronics, jquery, python<br />
|Member of=syn2cat<br />
}}<br />
= Skills =<br />
None. Just a bit of everything ...<br />
<br />
= Likes =<br />
<br />
* [http://www.youtube.com/watch?v=DURk7VQhW-k Typing a document in Windows Media Player]<br />
* [http://www.youtube.com/watch?v=O2rGTXHvPCQ Numb3rs' description of IRC]<br />
* [http://www.youtube.com/watch?v=xqQ6Z-HmAqY Fire! Fire! ]<br />
<br />
= Projects =<br />
<br />
The next section is my personal schedule. The actual projects are listed after it.<br />
<br />
== What should I do when I'm in the space? ==<br />
<br />
* <s>Finish the blinkentrees</s><br />
* Continue to work on the pdf tools<br />
* Port algotunes to C++, python's datatypes are too big (only 16 bit required)<br />
* Design and build a couple of programmers<br />
* Design and build the syndiwall LED matrix<br />
* Design and build the Tetris LED wall<br />
* Finish the handout for the famous etching and soldering workshop<br />
* Create a screencast for the famous etching and soldering workshop<br />
* Create linux packages / ports<br />
* Create gimmicks for the haxogreen page<br />
* Check the [http://sourceforge.net/projects/wall-changer/files/2.1/Gnome%202%20Version/wallch_2.1.tar.gz/download wallch] code and study how dbus works and how he's connecting to the internet<br />
<br />
== The most active ==<br />
<br />
* Erviz<br />
<br />
== Running and updating ==<br />
<br />
* [https://source.hacker.lu/projects/syn2stock syn2stock] (not very active)<br />
* [https://source.hacker.lu/projects/-2 Repage]<br />
* [https://source.hacker.lu/projects/cu-rs232 USB-UART Converter]<br />
* [https://source.hacker.lu/projects/-4 Synoice]<br />
* Cutie (a graphical client for UDDIv3-compliant web service registries)<br />
<br />
== Almost started ==<br />
<br />
<br />
== Not yet started ==<br />
<br />
* [https://source.hacker.lu/projects/-1 SiMStrix]<br />
* [https://source.hacker.lu/projects/-3 Megabit Meter]<br />
* [https://source.hacker.lu/projects/-5 µTerminal]<br />
* [https://source.hacker.lu/projects/-6 QR Decoder]<br />
* [https://source.hacker.lu/projects/seemon Seemon]<br />
<br />
I also want to build this [http://www.youtube.com/watch?v=HGbbag9dklU&feature=player_embedded skateboard]. <br />
<br />
Some questions to be answered before the project starts:<br />
<br />
* Costs: ~300€ <br />
* When is this project considered as successful? What if the board has stabilization problems which make the board ridable too hard? <br />
* What if some parts must be replaced to get rid of the stabilization problems? Who pays this? <br />
* Who can donate stuff .... or who knows somebody (who knows somebody ...) who could donate what we need? <br />
* Who wants to contribute? syn2stock has high priorities so the kickoff meeting will be in May/June<br />
<br />
== Concluded ==<br />
<br />
* [https://source.hacker.lu/projects/blinkentree Blinkentree project page], [[Blinkentree|Blinkentree end user page]]<br />
<br />
= Workshops =<br />
<br />
I held:<br />
<br />
* 2011 Feb 19th [[The famous Etching and Soldering Workshop]]<br />
* 2011 May 21st [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 6th [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 26-28th [[The famous Etching and Soldering Workshop]] at the [[Large_Hacker_Convention_II]]</div>Slopjong//wiki.syn2cat.lu/wiki/User:SlopjongUser:Slopjong2011-11-25T14:14:00Z<p>Slopjong: /* What should I do when I'm in the space? */</p>
<hr />
<div>{{Person<br />
|Firstname=Slopjong<br />
|Surname=Slopjong<br />
|Website=slopjong.de<br />
|Email=slopjong@hackerspace.lu<br />
|Skills=javascript, php, c, java, javafx, eagle, electronics, jquery, python<br />
|Member of=syn2cat<br />
}}<br />
= Skills =<br />
None. Just a bit of everything ...<br />
<br />
= Likes =<br />
<br />
* [http://www.youtube.com/watch?v=DURk7VQhW-k Typing a document in Windows Media Player]<br />
* [http://www.youtube.com/watch?v=O2rGTXHvPCQ Numb3rs' description of IRC]<br />
* [http://www.youtube.com/watch?v=xqQ6Z-HmAqY Fire! Fire! ]<br />
<br />
= Projects =<br />
<br />
The next section is my personal schedule. The actual projects are listed after it.<br />
<br />
== What should I do when I'm in the space? ==<br />
<br />
* Finish the blinkentrees<br />
* Continue to work on the pdf tools<br />
* Port algotunes to C++, python's datatypes are too big (only 16 bit required)<br />
* Design and build a couple of programmers<br />
* Design and build the syndiwall LED matrix<br />
* Design and build the Tetris LED wall<br />
* Finish the handout for the famous etching and soldering workshop<br />
* Create a screencast for the famous etching and soldering workshop<br />
* Create linux packages / ports<br />
* Create gimmicks for the haxogreen page<br />
* Check the [http://sourceforge.net/projects/wall-changer/files/2.1/Gnome%202%20Version/wallch_2.1.tar.gz/download wallch] code and study how dbus works and how he's connecting to the internet<br />
<br />
== The most active ==<br />
<br />
* Erviz<br />
<br />
== Running and updating ==<br />
<br />
* [https://source.hacker.lu/projects/syn2stock syn2stock] (not very active)<br />
* [https://source.hacker.lu/projects/-2 Repage]<br />
* [https://source.hacker.lu/projects/cu-rs232 USB-UART Converter]<br />
* [https://source.hacker.lu/projects/-4 Synoice]<br />
* Cutie (a graphical client for UDDIv3-compliant web service registries)<br />
<br />
== Almost started ==<br />
<br />
<br />
== Not yet started ==<br />
<br />
* [https://source.hacker.lu/projects/-1 SiMStrix]<br />
* [https://source.hacker.lu/projects/-3 Megabit Meter]<br />
* [https://source.hacker.lu/projects/-5 µTerminal]<br />
* [https://source.hacker.lu/projects/-6 QR Decoder]<br />
* [https://source.hacker.lu/projects/seemon Seemon]<br />
<br />
I also want to build this [http://www.youtube.com/watch?v=HGbbag9dklU&feature=player_embedded skateboard]. <br />
<br />
Some questions to be answered before the project starts:<br />
<br />
* Costs: ~300€ <br />
* When is this project considered as successful? What if the board has stabilization problems which make the board ridable too hard? <br />
* What if some parts must be replaced to get rid of the stabilization problems? Who pays this? <br />
* Who can donate stuff .... or who knows somebody (who knows somebody ...) who could donate what we need? <br />
* Who wants to contribute? syn2stock has high priorities so the kickoff meeting will be in May/June<br />
<br />
== Concluded ==<br />
<br />
* [https://source.hacker.lu/projects/blinkentree Blinkentree project page], [[Blinkentree|Blinkentree end user page]]<br />
<br />
= Workshops =<br />
<br />
I held:<br />
<br />
* 2011 Feb 19th [[The famous Etching and Soldering Workshop]]<br />
* 2011 May 21st [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 6th [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 26-28th [[The famous Etching and Soldering Workshop]] at the [[Large_Hacker_Convention_II]]</div>Slopjong//wiki.syn2cat.lu/wiki/Toolset_WorkshopToolset Workshop2011-11-25T13:31:04Z<p>Slopjong: </p>
<hr />
<div>{{Event<br />
|attendees=Ithierry, Sid<br />
|eventtype=Workshop<br />
|subtitle=ssh, git & redmine<br />
|description=In this workshop the new members will be introduced in syn2cat's toolchain of ssh, git & redmine.<br />
|contact=Slopjong,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2011/11/26 03:00:00 PM<br />
|till=2011/11/26 04:00:00 PM<br />
|location=Hackerspace, Strassen<br />
|announce=no<br />
|cost=1 Twix<br />
|u19=no<br />
|intro=workshop introducing our toolset<br />
|external=no<br />
}}<br />
=== Overview ===<br />
<br />
* What is Redmine?<br />
** Create a project<br />
** Write issues<br />
*** How to use correctly categories and versions?<br />
*** How is the roadmap related to issues?<br />
** Write wiki pages<br />
<br />
* What is ssh?<br />
** Create a ssh key and let the server know it<br />
** How do I login?<br />
<br />
* What is Git?<br />
** Create a repository<br />
** How to use clone, commit, push and pull?<br />
** Accessing & browsing a repository in redmine?<br />
<br />
<br />
=== References ===<br />
<br />
*[http://toroid.org/ams/git-central-repo-howto quick git tutorial] <br />
*[https://git.wiki.kernel.org/index.php/QuickStart git quickstart]<br />
*[http://nvie.com/posts/a-successful-git-branching-model/ git branching methods] <br />
*[http://rwmj.wordpress.com/2009/03/06/git-fatal-no-matching-remote-head/ What to do if cloning an empty repository fails]<br />
*[http://www.redmine.org/guide#User-guide redmine user guide]<br />
*[[User Manual]]<br />
*[http://www.vogella.de/articles/EGit/article.html EGit]</div>Slopjong//wiki.syn2cat.lu/wiki/User:SlopjongUser:Slopjong2011-11-25T12:07:42Z<p>Slopjong: /* What should I do when I'm in the space? */</p>
<hr />
<div>{{Person<br />
|Firstname=Slopjong<br />
|Surname=Slopjong<br />
|Website=slopjong.de<br />
|Email=slopjong@hackerspace.lu<br />
|Skills=javascript, php, c, java, javafx, eagle, electronics, jquery, python<br />
|Member of=syn2cat<br />
}}<br />
= Skills =<br />
None. Just a bit of everything ...<br />
<br />
= Likes =<br />
<br />
* [http://www.youtube.com/watch?v=DURk7VQhW-k Typing a document in Windows Media Player]<br />
* [http://www.youtube.com/watch?v=O2rGTXHvPCQ Numb3rs' description of IRC]<br />
* [http://www.youtube.com/watch?v=xqQ6Z-HmAqY Fire! Fire! ]<br />
<br />
= Projects =<br />
<br />
The next section is my personal schedule. The actual projects are listed after it.<br />
<br />
== What should I do when I'm in the space? ==<br />
<br />
* Finish the blinkentrees<br />
* Continue to work on the pdf tools<br />
* Port algotunes to C++, python's datatypes are too big (only 16 bit required)<br />
* Design and build a couple of programmers<br />
* Design and build the syndiwall LED matrix<br />
* Design and build the Tetris LED wall<br />
* Finish the handout for the famous etching and soldering workshop<br />
* Create a screencast for the famous etching and soldering workshop<br />
* Create linux packages / ports<br />
* Create gimmicks for the haxogreen page<br />
<br />
== The most active ==<br />
<br />
* Erviz<br />
<br />
== Running and updating ==<br />
<br />
* [https://source.hacker.lu/projects/syn2stock syn2stock] (not very active)<br />
* [https://source.hacker.lu/projects/-2 Repage]<br />
* [https://source.hacker.lu/projects/cu-rs232 USB-UART Converter]<br />
* [https://source.hacker.lu/projects/-4 Synoice]<br />
* Cutie (a graphical client for UDDIv3-compliant web service registries)<br />
<br />
== Almost started ==<br />
<br />
<br />
== Not yet started ==<br />
<br />
* [https://source.hacker.lu/projects/-1 SiMStrix]<br />
* [https://source.hacker.lu/projects/-3 Megabit Meter]<br />
* [https://source.hacker.lu/projects/-5 µTerminal]<br />
* [https://source.hacker.lu/projects/-6 QR Decoder]<br />
* [https://source.hacker.lu/projects/seemon Seemon]<br />
<br />
I also want to build this [http://www.youtube.com/watch?v=HGbbag9dklU&feature=player_embedded skateboard]. <br />
<br />
Some questions to be answered before the project starts:<br />
<br />
* Costs: ~300€ <br />
* When is this project considered as successful? What if the board has stabilization problems which make the board ridable too hard? <br />
* What if some parts must be replaced to get rid of the stabilization problems? Who pays this? <br />
* Who can donate stuff .... or who knows somebody (who knows somebody ...) who could donate what we need? <br />
* Who wants to contribute? syn2stock has high priorities so the kickoff meeting will be in May/June<br />
<br />
== Concluded ==<br />
<br />
* [https://source.hacker.lu/projects/blinkentree Blinkentree project page], [[Blinkentree|Blinkentree end user page]]<br />
<br />
= Workshops =<br />
<br />
I held:<br />
<br />
* 2011 Feb 19th [[The famous Etching and Soldering Workshop]]<br />
* 2011 May 21st [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 6th [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 26-28th [[The famous Etching and Soldering Workshop]] at the [[Large_Hacker_Convention_II]]</div>Slopjong//wiki.syn2cat.lu/wiki/User:SlopjongUser:Slopjong2011-11-25T11:58:52Z<p>Slopjong: /* What should I do when I'm in the space? */</p>
<hr />
<div>{{Person<br />
|Firstname=Slopjong<br />
|Surname=Slopjong<br />
|Website=slopjong.de<br />
|Email=slopjong@hackerspace.lu<br />
|Skills=javascript, php, c, java, javafx, eagle, electronics, jquery, python<br />
|Member of=syn2cat<br />
}}<br />
= Skills =<br />
None. Just a bit of everything ...<br />
<br />
= Likes =<br />
<br />
* [http://www.youtube.com/watch?v=DURk7VQhW-k Typing a document in Windows Media Player]<br />
* [http://www.youtube.com/watch?v=O2rGTXHvPCQ Numb3rs' description of IRC]<br />
* [http://www.youtube.com/watch?v=xqQ6Z-HmAqY Fire! Fire! ]<br />
<br />
= Projects =<br />
<br />
The next section is my personal schedule. The actual projects are listed after it.<br />
<br />
== What should I do when I'm in the space? ==<br />
<br />
* Finish the blinkentrees<br />
* Continue to work on the pdf tools<br />
* Design and build a couple of programmers<br />
* Design and build the syndiwall LED matrix<br />
* Design and build the Tetris LED wall<br />
* Finish the handout for the famous etching and soldering workshop<br />
* Create a screencast for the famous etching and soldering workshop<br />
* Create linux packages / ports<br />
* Create gimmicks for the haxogreen page<br />
<br />
== The most active ==<br />
<br />
* Erviz<br />
<br />
== Running and updating ==<br />
<br />
* [https://source.hacker.lu/projects/syn2stock syn2stock] (not very active)<br />
* [https://source.hacker.lu/projects/-2 Repage]<br />
* [https://source.hacker.lu/projects/cu-rs232 USB-UART Converter]<br />
* [https://source.hacker.lu/projects/-4 Synoice]<br />
* Cutie (a graphical client for UDDIv3-compliant web service registries)<br />
<br />
== Almost started ==<br />
<br />
<br />
== Not yet started ==<br />
<br />
* [https://source.hacker.lu/projects/-1 SiMStrix]<br />
* [https://source.hacker.lu/projects/-3 Megabit Meter]<br />
* [https://source.hacker.lu/projects/-5 µTerminal]<br />
* [https://source.hacker.lu/projects/-6 QR Decoder]<br />
* [https://source.hacker.lu/projects/seemon Seemon]<br />
<br />
I also want to build this [http://www.youtube.com/watch?v=HGbbag9dklU&feature=player_embedded skateboard]. <br />
<br />
Some questions to be answered before the project starts:<br />
<br />
* Costs: ~300€ <br />
* When is this project considered as successful? What if the board has stabilization problems which make the board ridable too hard? <br />
* What if some parts must be replaced to get rid of the stabilization problems? Who pays this? <br />
* Who can donate stuff .... or who knows somebody (who knows somebody ...) who could donate what we need? <br />
* Who wants to contribute? syn2stock has high priorities so the kickoff meeting will be in May/June<br />
<br />
== Concluded ==<br />
<br />
* [https://source.hacker.lu/projects/blinkentree Blinkentree project page], [[Blinkentree|Blinkentree end user page]]<br />
<br />
= Workshops =<br />
<br />
I held:<br />
<br />
* 2011 Feb 19th [[The famous Etching and Soldering Workshop]]<br />
* 2011 May 21st [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 6th [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 26-28th [[The famous Etching and Soldering Workshop]] at the [[Large_Hacker_Convention_II]]</div>Slopjong//wiki.syn2cat.lu/wiki/User:SlopjongUser:Slopjong2011-11-24T18:37:05Z<p>Slopjong: /* Projects */</p>
<hr />
<div>{{Person<br />
|Firstname=Slopjong<br />
|Surname=Slopjong<br />
|Website=slopjong.de<br />
|Email=slopjong@hackerspace.lu<br />
|Skills=javascript, php, c, java, javafx, eagle, electronics, jquery, python<br />
|Member of=syn2cat<br />
}}<br />
= Skills =<br />
None. Just a bit of everything ...<br />
<br />
= Likes =<br />
<br />
* [http://www.youtube.com/watch?v=DURk7VQhW-k Typing a document in Windows Media Player]<br />
* [http://www.youtube.com/watch?v=O2rGTXHvPCQ Numb3rs' description of IRC]<br />
* [http://www.youtube.com/watch?v=xqQ6Z-HmAqY Fire! Fire! ]<br />
<br />
= Projects =<br />
<br />
The next section is my personal schedule. The actual projects are listed after it.<br />
<br />
== What should I do when I'm in the space? ==<br />
<br />
* Finish the blinkentrees<br />
* Design and build a couple of programmers<br />
* Design and build the syndiwall LED matrix<br />
* Design and build the Tetris LED wall<br />
* Finish the handout for the famous etching and soldering workshop<br />
* Create a screencast for the famous etching and soldering workshop<br />
* Create linux packages / ports<br />
* Create gimmicks for the haxogreen page<br />
<br />
== The most active ==<br />
<br />
* Erviz<br />
<br />
== Running and updating ==<br />
<br />
* [https://source.hacker.lu/projects/syn2stock syn2stock] (not very active)<br />
* [https://source.hacker.lu/projects/-2 Repage]<br />
* [https://source.hacker.lu/projects/cu-rs232 USB-UART Converter]<br />
* [https://source.hacker.lu/projects/-4 Synoice]<br />
* Cutie (a graphical client for UDDIv3-compliant web service registries)<br />
<br />
== Almost started ==<br />
<br />
<br />
== Not yet started ==<br />
<br />
* [https://source.hacker.lu/projects/-1 SiMStrix]<br />
* [https://source.hacker.lu/projects/-3 Megabit Meter]<br />
* [https://source.hacker.lu/projects/-5 µTerminal]<br />
* [https://source.hacker.lu/projects/-6 QR Decoder]<br />
* [https://source.hacker.lu/projects/seemon Seemon]<br />
<br />
I also want to build this [http://www.youtube.com/watch?v=HGbbag9dklU&feature=player_embedded skateboard]. <br />
<br />
Some questions to be answered before the project starts:<br />
<br />
* Costs: ~300€ <br />
* When is this project considered as successful? What if the board has stabilization problems which make the board ridable too hard? <br />
* What if some parts must be replaced to get rid of the stabilization problems? Who pays this? <br />
* Who can donate stuff .... or who knows somebody (who knows somebody ...) who could donate what we need? <br />
* Who wants to contribute? syn2stock has high priorities so the kickoff meeting will be in May/June<br />
<br />
== Concluded ==<br />
<br />
* [https://source.hacker.lu/projects/blinkentree Blinkentree project page], [[Blinkentree|Blinkentree end user page]]<br />
<br />
= Workshops =<br />
<br />
I held:<br />
<br />
* 2011 Feb 19th [[The famous Etching and Soldering Workshop]]<br />
* 2011 May 21st [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 6th [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 26-28th [[The famous Etching and Soldering Workshop]] at the [[Large_Hacker_Convention_II]]</div>Slopjong//wiki.syn2cat.lu/wiki/User:SlopjongUser:Slopjong2011-11-24T18:35:37Z<p>Slopjong: /* Projects */</p>
<hr />
<div>{{Person<br />
|Firstname=Slopjong<br />
|Surname=Slopjong<br />
|Website=slopjong.de<br />
|Email=slopjong@hackerspace.lu<br />
|Skills=javascript, php, c, java, javafx, eagle, electronics, jquery, python<br />
|Member of=syn2cat<br />
}}<br />
= Skills =<br />
None. Just a bit of everything ...<br />
<br />
= Likes =<br />
<br />
* [http://www.youtube.com/watch?v=DURk7VQhW-k Typing a document in Windows Media Player]<br />
* [http://www.youtube.com/watch?v=O2rGTXHvPCQ Numb3rs' description of IRC]<br />
* [http://www.youtube.com/watch?v=xqQ6Z-HmAqY Fire! Fire! ]<br />
<br />
= Projects =<br />
<br />
== What should I do when I'm in the space? ==<br />
<br />
* Finish the blinkentrees<br />
* Design and build a couple of programmers<br />
* Design and build the syndiwall LED matrix<br />
* Design and build the Tetris LED wall<br />
* Finish the handout for the famous etching and soldering workshop<br />
* Create a screencast for the famous etching and soldering workshop<br />
* Create linux packages / ports<br />
* Create gimmicks for the haxogreen page<br />
<br />
== The most active ==<br />
<br />
* Erviz<br />
<br />
== Running and updating ==<br />
<br />
* [https://source.hacker.lu/projects/syn2stock syn2stock] (not very active)<br />
* [https://source.hacker.lu/projects/-2 Repage]<br />
* [https://source.hacker.lu/projects/cu-rs232 USB-UART Converter]<br />
* [https://source.hacker.lu/projects/-4 Synoice]<br />
* Cutie (a graphical client for UDDIv3-compliant web service registries)<br />
<br />
== Almost started ==<br />
<br />
<br />
== Not yet started ==<br />
<br />
* [https://source.hacker.lu/projects/-1 SiMStrix]<br />
* [https://source.hacker.lu/projects/-3 Megabit Meter]<br />
* [https://source.hacker.lu/projects/-5 µTerminal]<br />
* [https://source.hacker.lu/projects/-6 QR Decoder]<br />
* [https://source.hacker.lu/projects/seemon Seemon]<br />
<br />
I also want to build this [http://www.youtube.com/watch?v=HGbbag9dklU&feature=player_embedded skateboard]. <br />
<br />
Some questions to be answered before the project starts:<br />
<br />
* Costs: ~300€ <br />
* When is this project considered as successful? What if the board has stabilization problems which make the board ridable too hard? <br />
* What if some parts must be replaced to get rid of the stabilization problems? Who pays this? <br />
* Who can donate stuff .... or who knows somebody (who knows somebody ...) who could donate what we need? <br />
* Who wants to contribute? syn2stock has high priorities so the kickoff meeting will be in May/June<br />
<br />
== Concluded ==<br />
<br />
* [https://source.hacker.lu/projects/blinkentree Blinkentree project page], [[Blinkentree|Blinkentree end user page]]<br />
<br />
= Workshops =<br />
<br />
I held:<br />
<br />
* 2011 Feb 19th [[The famous Etching and Soldering Workshop]]<br />
* 2011 May 21st [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 6th [[The famous Etching and Soldering Workshop]]<br />
* 2011 August 26-28th [[The famous Etching and Soldering Workshop]] at the [[Large_Hacker_Convention_II]]</div>Slopjong//wiki.syn2cat.lu/wiki/Coding_OpenDuino_pluginsCoding OpenDuino plugins2011-11-20T00:18:53Z<p>Slopjong: </p>
<hr />
<div>{{Event<br />
|attendees=Ithierry, Muling, Slopjong<br />
|eventtype=Workshop<br />
|subtitle=Understanding Arduino and the PHP plugins<br />
|description=Introduction into OpenDuino's arduino and server side code. Howtos and guidelines to programming plugins.<br />
|contact=Kwisatz, Gunstick<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2011/11/26 16:00<br />
|till=2011/11/26 18:30<br />
|location=Hackerspace, Strassen<br />
|logo=Openduino.png<br />
|announce=no<br />
|cost=0 EUR<br />
|u19=no<br />
|keywords=openduino, arduino, php<br />
|external=no<br />
}}<br />
This workshop will consist of two parts:<br />
<br />
; The openduino architecture<br />
: How do the arduino and the server (mod_php) parts work together to have openduino do all of the magic it does? What messages get sent in between these two parts and what happens while you shiver outside in the cold, waiting for ''Sesame'' to open?<br />
<br />
; Coding Plugins for OpenDuino<br />
: Learn all about OpenDuino's server side plugin architecture:<br />
* How does one write plugins? <br />
* What can you make them do?<br />
* How can you add additional hooks?<br />
<br />
Learn all about that (and maybe more) during this workshop.<br />
<br />
This will be a '''BYOB''' (buy your own beer) event, but we'll have plenty of '''free knowledge''' :P<br />
<br />
== RSVP ==<br />
Please rsvp by adding yourself to the attendee list to the right.</div>Slopjong//wiki.syn2cat.lu/wiki/Coding_OpenDuino_pluginsCoding OpenDuino plugins2011-11-18T16:59:37Z<p>Slopjong: </p>
<hr />
<div>{{Event<br />
|attendees=destructive, Azunix, Ithierry<br />
|eventtype=Workshop<br />
|subtitle=Understanding Arduino and the PHP plugins<br />
|description=Introduction into OpenDuino's arduino and server side code. Howtos and guidelines to programming plugins.<br />
|contact=Kwisatz, Gunstick<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2011/11/19 16:00<br />
|till=2011/11/19 18:30<br />
|location=Hackerspace, Strassen<br />
|logo=Openduino.png<br />
|announce=no<br />
|cost=0 EUR<br />
|u19=no<br />
|keywords=openduino, arduino, php<br />
|external=no<br />
}}<br />
This workshop will consist of two parts:<br />
<br />
; The openduino architecture<br />
: How do the arduino and the server (mod_php) parts work together to have openduino do all of the magic it does? What messages get sent in between these two parts and what happens while you shiver outside in the cold, waiting for ''Sesame'' to open?<br />
<br />
; Coding Plugins for OpenDuino<br />
: Learn all about OpenDuino's server side plugin architecture:<br />
* How does one write plugins? <br />
* What can you make them do?<br />
* How can you add additional hooks?<br />
<br />
Learn all about that (and maybe more) during this workshop.<br />
<br />
This will be a '''BYOB''' (buy your own beer) event, but we'll have plenty of '''free knowledge''' :P<br />
<br />
== RSVP ==<br />
Please rsvp by adding yourself to the attendee list to the right.</div>Slopjong//wiki.syn2cat.lu/wiki/WhoWishesWhat-listWhoWishesWhat-list2011-11-18T08:39:10Z<p>Slopjong: /* USRP(2) (Universal Software Radio Peripheral) 1600$ */</p>
<hr />
<div>=About=<br />
This list shows who of our members wishes what from the [[Hardware_Wish-List|hardware-wish-list]].<br />
The aim of this list is to determine which things would be benefited most.<br />
<br />
=WhoWishesWhat-list=<br />
<br />
==[[Hardware_Wish-List#General_tools|General Tools]]==<br />
<br />
==[[Hardware_Wish-List#Electronics_Lab|Electronics Lab]]==<br />
<br />
===Digital oscilloscope===<br />
[[User:Gunstick|Gunstick]], [[User:Kris|Kris]], [[User:Slopjong|Slopjong]]<br />
<br />
===Spectrum analyzer===<br />
[[User:Gunstick|Gunstick]], [[User:Kris|Kris]], [[User:Slopjong|Slopjong]]<br />
<br />
==[[Hardware_Wish-List#Computer_equipment|Computer equipment]]==<br />
<br />
====[[wish_good_workstation| Good computer workstation]]====<br />
[[User:sim0n|sim0n]]<br />
<br />
====1-8x [http://www.alternate.de/html/product/Netgear/GS116E/837112/? Energy saving 16-port Gb switches]====<br />
[[User:sim0n|sim0n]], [[User:Ithierry|Ithierry]]<br />
<br />
====[http://www.alternate.de/html/product/Hewlett-Packard/V1910-48G/824866/? 48-port switch for camp and events]====<br />
[[User:sim0n|sim0n]], [[User:Muling|Muling]]<br />
<br />
==[[Hardware_Wish-List#Audio.2FVideo_equipment|Audio/Video equipment]]==<br />
<br />
====Full-HD projector with roll-up projection screen====<br />
[[User:destructive|destructive]], [[User:Ithierry|Ithierry]], [[User:Gunstick|Gunstick]], [[User:Kris|Kris]], [[User:Slopjong|Slopjong]]<br />
<br />
==[[Hardware_Wish-List#Specialized_tools_and_machinery|Specialized tools and machinery]]==<br />
<br />
====(Metal/Wood) Lathe (Drehmaschine)====<br />
Who wants that?<br />
<br />
====CNC mill====<br />
* Proxxon Präzisionsdrehmaschine PD 230/E (Metal Lathe) ~699€<br />
** Späne-Auffangwanne mit Spritzschutz für die Drehmaschine PD 230/E<br />
** Zusatzmaterial für Drehmaschine<br />
<br />
See also laser cutter.<br />
<br />
Who wants that?<br />
<br />
====[http://www.air-vac-eng.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=AS&Category_Code=PVSG, PVSG Vacuum Desoldering System]====<br />
Who wants that?<br />
<br />
====[http://www.abacomdirect.com/p-176-ezpick-smt-pick-and-place-system.aspx pick and place manual vacuum/suction tool (this might get too advanced)] ~700$ + delivery====<br />
Who wants that?<br />
<br />
====Laser cutter (commercial ~ €3000-6000, DIY ~ €1500-4000)====<br />
<br />
This machine allows us to cut various complex pieces out of material like plastic, wood or metal (only with very expensive and powerful machines). <br />
<br />
The [Makerbot] is built from pieces cut with a laser cutter. <br />
<br />
Some suppliers of theese machines: [http://www.hflaser.com/Laser-Cutter.html LaserCutter] [http://www.pfeifer-graviermaschinen.de/p405-Lasertechnik-Skylaser_8050N.htm?showMenu=14] [http://www.pfeifer-graviermaschinen.de/staticPage,home/] [http://www.trotec.net/020+Products/_de-DE/005+CO2+Laser+Systems.htm] [http://www.novograv-laser.com/start.htm]. <br />
<br />
It is possible and reasonable to self build a laser cutter. Budget for this is between €1500-4000 depending on working area size and component selection.<br />
<br />
For DIY version see [http://www.hflaser.com/Laser-Cutter.html here] [http://labs.nortd.com/lasersaur/]<br />
<br />
Parts of the DIY laser (frame, driving mechanism) can be used for other similar projects.<br />
<br />
Note that a laser cutter needs an air filter too [http://www.fumex.se/www/files/eng/mobfilter_industry/mf/product_sheet/prod_mf_eng.pdf NEED FUMEX MF] <br />
<br />
[[User:sim0n|sim0n]], [[User:Kris|Kris]], [[User:Muling|Muling]], [[User:Slopjong|Slopjong]]<br />
<br />
====[http://www.ettus.com/products USRP(2) (Universal Software Radio Peripheral)] 1600$====<br />
[[User:destructive|destructive]], [[User:sim0n|sim0n]], [[User:muling|muling]], [[User:prometheus|prometheus]], [[User:k|Kabel]], [[User:Kwisatz|Kwisatz]], [[User:Slopjong|Slopjong]]</div>Slopjong